Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IS25WJ064F-JBLE

ISSI(Integrated Silicon Solution) · NOR FLASH · SOIC-8

IS25WJ064F-JBLE from ISSI(Integrated Silicon Solution), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable input that selects the device for the SPI interface.
2 SO (IO1) bidirectional Serial Data Output (IO1) that serves as a multi-I/O data pin in Dual and Quad modes, and goes to high impedance when HOLD# is low and CE# is low.
3 WP# (IO2) bidirectional Write Protect input that becomes serial data IO2 in Quad mode.
4 GND power_in Ground, connect to ground when referenced to Vcc.
5 SI (IO0) bidirectional Serial Data Input (IO0) that serves as a multi-I/O data pin in Dual and Quad modes.
6 SCK input Serial Data Clock that synchronizes input and output timing operations.
7 HOLD# or RESET# (IO3) bidirectional HOLD# (default) or RESET# per bit23 of the Status Register when QE=0, active low, and becomes IO3 when QE=1.
8 Vcc power_in Device core power supply, 1.65V to 2.0V.

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package SOIC-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 °C 83
Input Voltage on All Pins (min) -0.6 V with respect to ground; max is VCC + 0.5V 83
Output Voltage on All Outputs (min) -0.6 V with respect to ground; max is VCC + 0.5V 83
Supply Voltage VCC -0.5 2.5 V 83
ESD Voltage (HBM) -2000 2000 V ANSI/ESDA/JEDEC JS-001 83
Operating Temperature (Extended Grade E) -40 105 °C 83
VCC Power Supply VCC 1.65 1.8 2 V 83
VCC Active Read current ICC1 1.5 3 mA NORD Single at 66MHz 84
VCC Active Read current ICC1 2 4 mA FRD Single at 80MHz 84
VCC Active Read current ICC1 3 6 mA FRD Quad at 80MHz 84
VCC Active Read current ICC1 3.5 7 mA FRD Quad at 104MHz 84
VCC Program Current ICC2 12 18 mA CE# = VCC 84
VCC WRSR Current ICC3 12 18 mA CE# = VCC 84
VCC Erase Current (SER/BER32/BER64) ICC4 12 18 mA CE# = VCC 84
VCC Erase Current (CE) ICC5 12 18 mA CE# = VCC 84
VCC Standby Current CMOS ISB1 11 40 µA CE# = VCC, VIN = GND or VCC, 85°C 84
VCC Standby Current CMOS ISB1 45 µA CE# = VCC, VIN = GND or VCC, 105°C 84
Deep power down current ISB2 0.1 12 µA CE# = VCC, VIN = GND or VCC, 85°C 84
Deep power down current ISB2 15 µA CE# = VCC, VIN = GND or VCC, 105°C 84
Input Leakage Current ILI -2 2 µA VIN = 0V to VCC 84
Output Leakage Current ILO -2 2 µA VIN = 0V to VCC 84
Input Low Voltage (min) VIL -0.5 V max is 0.3VCC 84
Output Low Voltage VOL 0.2 V IOL = 100 µA 84
Input Capacitance (CE#, SCK) CIN 6 pF VIN = 0V, TA = 25°C, VCC=1.8V, 1MHz 85
Input/Output Capacitance (other pins) CIN/OUT 8 pF VIN/OUT = 0V, TA = 25°C, VCC=1.8V, 1MHz 85
Clock Frequency (except fast read DTR, 03h, EBh) fCT 0 133 MHz 86
Clock Frequency for fast read Quad I/O (EBh) fCT 0 120 MHz 86
Clock Frequency for fast read DTR fCT 0 80 MHz SPI DTR, Dual DTR, Dual I/O DTR, Quad I/O DTR, and QPI DTR 86
Clock Frequency for read (03h) fC 0 66 MHz 86
CE# High Time tCEH 7 ns 86
CE# Active Setup Time tCS 5 ns 86
CE# Active Hold Time tCH 5 ns 86
CE# Not Active Hold Time tCHSL 2.7 ns 86
CE# Not Active Setup Time tSHCH 2.7 ns 86
Data In Setup Time tDS 2 ns STR 86
Data In Setup Time tDS 1.5 ns DTR 86
Data in Hold Time tDH 2 ns STR 86
Data in Hold Time tDH 1.5 ns DTR 86
Output Valid tV 6 ns CL = 15pF 86
Output Valid tV 7 ns CL = 30pF 86
Output Hold Time tOH 1.2 ns 86
Output Disable Time tDIS 6 ns 86
Write Protect Setup Time tWHSL 20 ns 86
Write Protect Hold Time tSHWL 100 ns 86
HOLD Active Setup Time relative to SCK tHLCH 5 ns 86
HOLD Active Hold Time relative to SCK tCHHH 5 ns 86
HOLD Not Active Setup Time relative to SCK tHHCH 5 ns 86
HOLD Not Active Hold Time relative to SCK tCHHL 5 ns 86
HOLD to Output Low Z tLZ 6 ns 86
HOLD to Output High Z tHZ 6 ns 86
Release deep power down tRES1 5 µs 86
Deep power down tDP 3 µs 86
Write Status Register time tW 2 25 ms 86
Suspend to read ready tSUS 20 µs 86
Resume to another suspend time tRS 100 µs 86
Reset recovery time except from Erase tRST 30 µs 86
Reset recovery time from Erase tRST_E 12 ms 86
Vcc(min) to CE# Low tVCE 300 µs 90
Write Inhibit Voltage VWI 1.4 V 90

CAD (KiCad official)

  • Symbol: IS25WJ064F-JBLE
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: is25wj064f-jble-etched.step / is25wj064f-jble-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is25wj064f-jble.step / is25wj064f-jble.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (100 pp, sha256 b4fd21387e18c1a5, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF