Generated by kicad-footprint-generator · KiCad file format 20260206
IS25WJ032F-JNLE
ISSI(Integrated Silicon Solution) · NOR FLASH · SOP-8
IS25WJ032F-JNLE from ISSI(Integrated Silicon Solution), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable input that selects the device for the SPI interface. |
| 2 | SO (IO1) | bidirectional | Serial Data Output in standard SPI that becomes bidirectional IO1 in dual/quad and QPI modes, and is high impedance when HOLD# is low with CE# low. |
| 3 | WP# (IO2) | bidirectional | Write Protect input that becomes bidirectional IO2 in quad and QPI modes. |
| 4 | GND | power_in | Ground: connect to ground when referenced to Vcc. |
| 5 | SI (IO0) | bidirectional | Serial Data Input for commands, addresses and data in standard SPI that becomes bidirectional IO0 in dual/quad and QPI modes. |
| 6 | SCK | input | Serial Data Clock: synchronized clock for input and output timing operations. |
| 7 | HOLD# (IO3) / RESET# | bidirectional | Active-low HOLD# (default) or RESET# selected by status register bit23 when QE=0, and it becomes IO3 when the QE bit is set to 1. |
| 8 | Vcc | power_in | Device core power supply, 1.65V to 2.0V single supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -65 | 150 | °C | 83 | |||
| Input Voltage with Respect to Ground on All Pins | -0.6 | V | upper limit printed as VCC + 0.5V | 83 | |||
| VCC Supply Voltage | VCC | -0.5 | 2.5 | V | 83 | ||
| Electrostatic Discharge Voltage (HBM) | -2000 | 2000 | V | ANSI/ESDA/JEDEC JS-001 | 83 | ||
| Operating Temperature (Extended Grade E) | -40 | 105 | °C | Extended Grade E | 83 | ||
| VCC Power Supply | VCC | 1.65 | 1.8 | 2 | V | 83 | |
| VCC Active Read current | ICC1 | 1.2 | 2.5 | mA | NORD Single at 66MHz | 84 | |
| VCC Active Read current | ICC1 | 1.5 | 3 | mA | FRD Single at 80MHz | 84 | |
| VCC Active Read current | ICC1 | 2.5 | 5 | mA | FRD Quad at 80MHz | 84 | |
| VCC Active Read current | ICC1 | 3 | 6 | mA | FRD Quad at 104MHz | 84 | |
| VCC Active Read current | ICC1 | 4 | 8 | mA | FRD Quad at 133MHz | 84 | |
| VCC Program Current | ICC2 | 10 | 16 | mA | CE# = VCC | 84 | |
| VCC WRSR Current | ICC3 | 10 | 16 | mA | CE# = VCC | 84 | |
| VCC Erase Current (SER/BER32/BER64) | ICC4 | 10 | 16 | mA | CE# = VCC | 84 | |
| VCC Erase Current (CE) | ICC5 | 10 | 16 | mA | CE# = VCC | 84 | |
| VCC Standby Current CMOS | ISB1 | 10 | 35 | µA | CE# = VCC, VIN = GND or VCC, 85°C | 84 | |
| VCC Standby Current CMOS | ISB1 | 40 | µA | CE# = VCC, VIN = GND or VCC, 105°C | 84 | ||
| Deep power down current | ISB2 | 0.1 | 7 | µA | CE# = VCC, VIN = GND or VCC, 85°C | 84 | |
| Deep power down current | ISB2 | 12 | µA | CE# = VCC, VIN = GND or VCC, 105°C | 84 | ||
| Input Leakage Current | ILI | -2 | 2 | µA | VIN = 0V to VCC | 84 | |
| Output Leakage Current | ILO | -2 | 2 | µA | VIN = 0V to VCC | 84 | |
| Input Low Voltage | VIL | -0.5 | V | max printed as 0.3VCC | 84 | ||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100 µA | 84 | ||
| Input Capacitance (CE#, SCK) | CIN | 6 | pF | VIN = 0V, TA = 25°C, VCC=1.8V, 1MHz | 85 | ||
| Input/Output Capacitance (other pins) | CIN/OUT | 8 | pF | VIN/OUT = 0V, TA = 25°C, VCC=1.8V, 1MHz | 85 | ||
| Clock Frequency except for fast read DTR and read (03h) | fCT | 0 | 133 | MHz | 86 | ||
| Clock Frequency for fast read DTR | fCT | 0 | 80 | MHz | SPI DTR, Dual DTR, Dual I/O DTR, Quad I/O DTR, and QPI DTR | 86 | |
| Clock Frequency for read (03h) | fC | 0 | 66 | MHz | 86 | ||
| CE# High Time | tCEH | 20 | ns | 86 | |||
| CE# Active Setup Time | tCS | 5 | ns | 86 | |||
| CE# Active Hold Time | tCH | 5 | ns | 86 | |||
| CE# Not Active Hold Time | tCHSL | 2.7 | ns | 86 | |||
| CE# Not Active Setup Time | tSHCH | 2.7 | ns | 86 | |||
| Data In Setup Time | tDS | 2 | ns | STR | 86 | ||
| Data In Setup Time | tDS | 1.5 | ns | DTR | 86 | ||
| Data in Hold Time | tDH | 2 | ns | STR | 86 | ||
| Data in Hold Time | tDH | 1.5 | ns | DTR | 86 | ||
| Output Valid | tV | 6 | ns | CL = 15pF | 86 | ||
| Output Valid | tV | 7 | ns | CL = 30pF | 86 | ||
| Output Hold Time | tOH | 1.2 | ns | 86 | |||
| Output Disable Time | tDIS | 6 | ns | 86 | |||
| Write Status Register time | tW | 2 | 15 | ms | 86 | ||
| Vcc(min) to CE# Low | tVCE | 300 | us | 90 | |||
| Write Inhibit Voltage | VWI | 1.4 | V | 90 | |||
| Sector Erase Time (4Kbyte) | 20 | 200 | ms | 91 | |||
| Block Erase Time (32Kbyte) | 0.1 | 0.5 | s | 91 | |||
| Block Erase Time (64Kbyte) | 0.15 | 0.8 | s | 91 | |||
| Chip Erase Time | 7 | 20 | s | 91 | |||
| Page Programming Time | 0.3 | 1.6 | ms | 91 | |||
| Byte Program (First Byte) | 15 | 50 | µs | 91 | |||
| Endurance | 100000 | Cycles | JEDEC Standard A117 | 91 | |||
| Data Retention | 20 | Years | JEDEC Standard A117 | 91 | |||
| Latch-Up | -100 | 100 | mA | JEDEC Standard 78 | 91 |
CAD (KiCad official)
- Symbol:
IS25WJ032F-JNLE - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
is25wj032f-jnle-etched.step/is25wj032f-jnle-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is25wj032f-jnle.step/is25wj032f-jnle.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (97 pp, sha256
30b7ebcdefc1b0ae, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).