main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers is25lp256d-jlle: symbol repaired (body fitted to the names) · Ray
is25lp256d-jlle-etched.glb Publish 0.1.0 · Ray
is25lp256d-jlle-etched.step is25lp256d-jlle: factory component page (tier=lcsc) · Ray
is25lp256d-jlle-hero.glb is25lp256d-jlle: hero GLB from the etched model (keeps the MPN mark) · Ray
is25lp256d-jlle-hero.overlay.json Publish 0.1.0 · Ray
is25lp256d-jlle.glb Publish 0.1.0 · Ray
is25lp256d-jlle.kicad_mod Publish 0.1.0 · Ray
is25lp256d-jlle.kicad_sym is25lp256d-jlle: symbol repaired (body fitted to the names) · Ray
is25lp256d-jlle.lbr is25lp256d-jlle: symbol repaired (body fitted to the names) · Ray
is25lp256d-jlle.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

IS25LP256D-JLLE

ISSI(Integrated Silicon Solution) · NOR FLASH · WSON-8-EP(6x8)

IS25LP256D-JLLE from ISSI(Integrated Silicon Solution), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable: when high the device is deselected with outputs high-Z and in low-power standby, and a high-to-low transition is required after power-up before a new instruction is accepted.
2 SO (IO1) bidirectional Serial Data Output in standard SPI (data read on the falling edge of SCK), becoming bidirectional IO1 in Dual and Quad SPI/QPI modes.
3 WP# (IO2) bidirectional Write Protect that protects the Status Register (SRWD, QE, BP3-BP0) when SRWD=1 and WP# is low, and serves as IO2 in Quad mode (WP# function unavailable when QE=1).
4 GND power_in Ground reference for Vcc.
5 SI (IO0) bidirectional Serial Data Input in standard SPI (latched on the rising edge of SCK), becoming bidirectional IO0 in Dual and Quad SPI/QPI modes.
6 SCK input Serial Data Clock that synchronizes input and output timing; supports SPI Modes 0 and 3.
7 HOLD# or RESET# (IO3) bidirectional HOLD# (default, P7=0) pauses serial communication while selected, or RESET# (P7=1) hardware reset, both active low; becomes IO3 when QE=1.
8 Vcc power_in Device core power supply, 2.30V to 3.60V for IS25LP.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package WSON-8-EP(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 °C 159
Lead Soldering Temperature (lead-free package) 260 °C 3 seconds, surface mount 159
Input/Output Voltage w.r.t. Ground (min) -0.5 V All pins; upper limit VCC + 0.5V 159
VCC Supply Voltage (abs max) VCC -0.5 6 V IS25LP 159
Operating Temperature (Extended Grade E) -40 105 °C Extended Grade E 159
VCC Power Supply VCC 2.3 3 3.6 V IS25LP, max 133MHz; 2.7V-3.6V for max 166MHz 159
VCC Active Read current ICC1 7.5 9 mA NORD at 80MHz 160
VCC Active Read current ICC1 9.5 11 mA FRD Single at 166MHz 160
VCC Active Read current ICC1 9 15 mA FRD Quad at 166MHz 160
VCC Active Read current ICC1 10 13.5 mA FRD Quad at 133MHz 160
VCC Active Read current ICC1 11 13 mA FRD Quad DTR at 80MHz 160
VCC Program Current ICC2 25 30 mA CE# = VCC, 85°C 160
VCC Program Current ICC2 30 mA CE# = VCC, 105°C 160
VCC WRSR Current ICC3 25 30 mA CE# = VCC, 85°C 160
VCC Erase Current (sector/block) ICC4 25 30 mA CE# = VCC, 85°C 160
VCC Erase Current (CE) ICC5 25 30 mA CE# = VCC, 85°C 160
VCC Standby Current CMOS (IS25LP) ISB1 10 60 µA CE# = VCC, 85°C 160
VCC Standby Current CMOS (IS25LP) ISB1 90 µA CE# = VCC, 105°C 160
Deep power down current (IS25LP) ISB2 7.5 20 µA CE# = VCC, 85°C 160
Deep power down current (IS25LP) ISB2 30 µA CE# = VCC, 105°C 160
Input Leakage Current ILI -1 1 µA VIN = 0V to VCC 160
Output Leakage Current ILO -1 1 µA VIN = 0V to VCC 160
Input Low Voltage (min) VIL -0.5 V Max is 0.3VCC 160
Output Low Voltage VOL 0.2 V IOL = 100 µA 160
Input Capacitance (CE#, SCK) CIN 6 pF VIN = 0V, TA=25°C, VCC=3V, 1MHz 161
Input/Output Capacitance (other pins) CIN/OUT 8 pF VIN/OUT = 0V, TA=25°C, VCC=3V, 1MHz 161
Clock Frequency fast read fCT 0 166 MHz Vcc=2.7V~3.6V 162
Clock Frequency fast read fCT 0 133 MHz Vcc=2.3V~3.6V 162
Clock Frequency fast read DTR fC2, fT2, fQ2 0 80 MHz 162
Clock Frequency read mode SPI fC 0 80 MHz 162
CE# High Time tCEH 7 ns 162
CE# Setup Time tCS 3 ns IS25LP 162
CE# Hold Time tCH 3 ns 162
Data In Setup Time tDS 2 ns Normal Mode 162
Data in Hold Time tDH 2 ns Normal Mode 162
Output Valid tV 7 ns @ 166MHz (CL = 15pF) 162
Output Hold Time tOH 2 ns 162
Output Disable Time tDIS 8 ns 162
Sector Erase Time (4Kbyte) tEC 100 300 ms 162
Block Erase Time (64Kbyte) tEC 0.17 1 s 162
Chip Erase Time tEC 70 180 s 162
Page Program Time tPP 0.2 0.8 ms 162
Release deep power down tRES1 3 µs IS25LP 163
Write Status Register time tW 2 15 ms 163
Vcc(min) to CE# Low tVCE 1 ms 166
Power-up time delay to write instruction tPUW 1 10 ms 166
Write Inhibit Voltage VWI 2.1 V IS25LP 166
Byte Program 8 40 µs 167
Endurance 100000 Cycles JEDEC Standard A117 167
Data Retention 20 Years JEDEC Standard A103 167
ESD, Human Body Model 2000 Volts JEDEC Standard A114 167

CAD (KiCad official)

  • Symbol: IS25LP256D-JLLE
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: is25lp256d-jlle-etched.step / is25lp256d-jlle-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is25lp256d-jlle.step / is25lp256d-jlle.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (173 pp, sha256 c7fc8c433c26a257, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF