main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs is25lp040e-jyla3-tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers is25lp040e-jyla3-tr: viewers · Ray
is25lp040e-jyla3-tr-etched.fit.json is25lp040e-jyla3-tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
is25lp040e-jyla3-tr-etched.glb is25lp040e-jyla3-tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
is25lp040e-jyla3-tr-etched.step is25lp040e-jyla3-tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
is25lp040e-jyla3-tr.glb Publish 0.1.0 · Ray
is25lp040e-jyla3-tr.kicad_mod Publish 0.1.0 · Ray
is25lp040e-jyla3-tr.kicad_sym Publish 0.1.0 · Ray
is25lp040e-jyla3-tr.lbr Publish 0.1.0 · Ray
is25lp040e-jyla3-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json is25lp040e-jyla3-tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md is25lp040e-jyla3-tr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

IS25LP040E-JYLA3-TR

ISSI Integrated Silicon Solution · NOR FLASH · USON-8-EP(2x3)

IS25LP040E-JYLA3-TR from ISSI Integrated Silicon Solution, in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable, active low. When high the device is deselected and enters low-power standby with high-impedance outputs. Must transition from high to low after power-up before a new instruction is accepted.
2 SO/IO1 bidirectional Serial Data Output in standard SPI mode (unidirectional, data driven on falling edge of SCK). In Dual/Quad SPI and QPI modes it becomes bidirectional IO1.
3 WP#/IO2 bidirectional Write Protect input (active low) in standard SPI: protects Status Register bits (SRWD, QE, BP3, BP2, BP1, BP0) from being written when SRWD=1. When QE=1 or in Quad/QPI modes the pin serves as bidirectional IO2 and the WP# function is unavailable.
4 GND power_in Device ground. Connect to system ground reference for Vcc.
5 SI/IO0 bidirectional Serial Data Input in standard SPI mode (unidirectional, latched on rising edge of SCK for instructions, addresses, and write data). In Dual/Quad SPI and QPI modes it becomes bidirectional IO0.
6 SCK input Serial Clock input. Synchronizes all input and output timing. Supports SPI modes (0,0) and (1,1) up to 104MHz fast-read (416MHz equivalent throughput in QPI).
7 HOLD#/IO3 bidirectional Hold input (active low) in standard SPI: pauses serial communication without resetting the sequence while CE# is low; SO is high-Z while HOLD# is low. When QE=1 (Quad enabled) or in QPI mode, the pin becomes bidirectional IO3 and HOLD# function is unavailable.
8 VCC power_in Core power supply. IS25LP variant range 2.30V to 3.60V (IS25WP variant would be 1.70V to 1.95V). Decouple to GND per manufacturer recommendation.

Key specifications

Parameter Value
Manufacturer ISSI Integrated Silicon Solution
Package USON-8-EP(2x3)
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • IS25LP040E-JYLA3-TRB
  • IS25LP040E-JYLA3-TRN
  • IS25LP040E-JYLA3-TRV
  • IS25LP040E-JYLA3-TRY
  • IS25LP040E-JYLA3-TRD
  • IS25LP040E-JYLA3-TRK

CAD (KiCad official)

  • Symbol: IS25LP040E-JYLA3-TR
  • Footprint: Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm
  • 3D model: USON-8-EP(2x3) (KiCad packages3D, STEP)
  • 3D model files: is25lp040e-jyla3-tr-etched.step / is25lp040e-jyla3-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is25lp040e-jyla3-tr.step / is25lp040e-jyla3-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI Integrated Silicon Solution datasheet (93 pp, sha256 682d1cb75600d9cd, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF