main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers is25lp040e-jnla3: viewers · Ray
is25lp040e-jnla3-etched.glb Publish 0.1.0 · Ray
is25lp040e-jnla3-etched.step is25lp040e-jnla3: factory component page (tier=lcsc) · Ray
is25lp040e-jnla3-hero.glb is25lp040e-jnla3: hero GLB from the etched model (keeps the MPN mark) · Ray
is25lp040e-jnla3-hero.overlay.json Publish 0.1.0 · Ray
is25lp040e-jnla3.glb Publish 0.1.0 · Ray
is25lp040e-jnla3.kicad_mod Publish 0.1.0 · Ray
is25lp040e-jnla3.kicad_sym Publish 0.1.0 · Ray
is25lp040e-jnla3.lbr Publish 0.1.0 · Ray
is25lp040e-jnla3.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

IS25LP040E-JNLA3

ISSI(Integrated Silicon Solution) · NOR FLASH · SOIC-8

IS25LP040E-JNLA3 from ISSI(Integrated Silicon Solution), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable (CE#) selects the device when pulled low and deselects it, placing outputs in high impedance, when driven high; data is not accepted while CE# is high.
2 SO (IO1) bidirectional Serial Data Output SO is used to read data or status on the falling edge of SCK in standard SPI and becomes bidirectional IO1 in Dual and Quad SPI mode.
3 WP# (IO2) bidirectional Write Protect WP# write-protects the Status Register together with the SRWD bit when pulled low, and becomes IO2 for Quad SPI so the WP# function is unavailable when QE is set to 1.
4 GND power_in Ground: connect to ground when referenced to Vcc.
5 SI (IO0) bidirectional Serial Data Input SI writes instructions, addresses or data on the rising edge of SCK in standard SPI and becomes bidirectional IO0 in Dual and Quad SPI mode.
6 SCK input Serial Data Clock SCK is the synchronized clock for input and output timing operations.
7 HOLD# (IO3) bidirectional Hold HOLD# pauses serial communication without resetting the serial sequence when pulled low while CE# is low, and becomes IO3 when QE is set to 1 so the HOLD# function is unavailable.
8 Vcc power_in Power: device core power supply.

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package SOIC-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 °C 77
VCC Supply Voltage (IS25LP) absolute maximum VCC -0.5 6 V IS25LP 77
Surface Mount Lead Soldering Temperature, Lead-free Package 260 °C 3 Seconds 77
Ambient Operating Temperature, Automotive Grade A3 -40 125 °C Automotive Grade A3 77
VCC Power Supply VCC 2.3 3 3.6 V IS25LP 77
VCC Active Read current ICC1 6 8 mA NORD at 50MHz 78
VCC Active Read current ICC1 7 9 mA FRD Single at 104MHz 78
VCC Active Read current ICC1 8 10 mA FRD Dual at 104MHz 78
VCC Active Read current ICC1 10 12 mA FRD Quad at 104MHz 78
Output Low Voltage VOL 0.2 V VMIN < VCC < VMAX; IOL = 100 µA 78
Clock Frequency for fast read mode fCT 0 104 MHz 80
Clock Frequency for read mode fC 0 50 MHz 80
Sector Erase Time (4Kbyte) tEC 70 300 ms 85
Block Erase Time (32KB) 130 500 ms 85
Block Erase Time (64KB) 200 1000 ms Not applicable to 256Kb and 512Kb 85
Chip Erase Time 4Mb 1.5 3 s 4Mb 85
Page Programming Time tPP 0.45 1.2 ms 85
Byte Program 8 40 µs 85
Input Capacitance (CE#, SCK) IS25LP CIN 6 pF VIN = 0V 79
Input/Output Capacitance (other pins) IS25LP CIN/OUT 8 pF VIN/OUT = 0V 79

CAD (KiCad official)

  • Symbol: IS25LP040E-JNLA3
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: is25lp040e-jnla3-etched.step / is25lp040e-jnla3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is25lp040e-jnla3.step / is25lp040e-jnla3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (93 pp, sha256 682d1cb75600d9cd, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF