Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
IS25LP032D-JTLE-TR
ISSI(Integrated Silicon Solution) · NOR FLASH · USON-8(3x4)
IS25LP032D-JTLE-TR from ISSI(Integrated Silicon Solution), in a USON-8(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable: high deselects the device and puts outputs in high impedance with low-power standby, low selects it, and CE# must transition high to low after power-up before a new instruction is accepted. |
| 2 | SO (IO1) | bidirectional | Serial Data Output in standard SPI (changes on falling SCK edge) and bidirectional IO1 in Dual and Quad SPI modes. |
| 3 | WP# (IO2) | bidirectional | Write Protect input that protects the Status Register bits when SRWD=1 and WP# is low, becoming IO2 when the QE bit is set to 1. |
| 4 | GND | power_in | Ground: connect to ground when referenced to Vcc. |
| 5 | SI (IO0) | bidirectional | Serial Data Input that takes instructions, addresses and data on the rising SCK edge, and bidirectional IO0 in Dual and Quad SPI modes. |
| 6 | SCK | input | Serial Data Clock: synchronized clock for input and output timing operations. |
| 7 | HOLD# or RESET# (IO3) | bidirectional | HOLD# (default, P7=0) pauses serial communication while selected, or RESET# when P7=1, and it becomes IO3 when the QE bit is set to 1. |
| 8 | Vcc | power_in | Device core power supply, 2.30V to 3.60V for IS25LP. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | USON-8(3x4) |
| Category | Memory |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
IS25LP032D-JTLE-TR - Footprint:
Package_SON:Winbond_USON-8-2EP_3x4mm_P0.8mm_EP0.2x0.8mm - 3D model: USON-8(3x4), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm nominal UFQFPN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
is25lp032d-jtle-tr-etched.step/is25lp032d-jtle-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is25lp032d-jtle-tr.step/is25lp032d-jtle-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (119 pp, sha256
5c8ee9ca2544cc49, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).