← Commit history

Initial commit: component/is25lp016d-jnle-tr

Ray ·6bb543b83a ·
2 files changed +188
README.mdadded+44
@@ -0,0 +1,44 @@+# IS25LP016D-JNLE-TR++**ISSI Integrated Silicon Solution** · NOR FLASH · SOIC-8++IS25LP016D-JNLE-TR from ISSI Integrated Silicon Solution, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CE# | input | Chip Enable (active-low): deselects device and puts outputs in high-Z when high; selects device and brings it out of standby when low; CE# must transition high-to-low after power-up before a new instruction is accepted. |+| 2 | SO (IO1) | bidirectional | Serial Data Output / IO1: unidirectional output in standard SPI (data/status shifted out on falling SCK edge); becomes bidirectional IO1 in Dual I/O, Quad I/O, and QPI modes. |+| 3 | WP# (IO2) | bidirectional | Write Protect / IO2: when SRWD=1 and WP# is low, Status Register bits are write-protected; WP# function is disabled and pin becomes IO2 when QE bit is set to 1. |+| 4 | GND | power_in | Ground: connect to ground when referenced to VCC. |+| 5 | SI (IO0) | bidirectional | Serial Data Input / IO0: unidirectional input in standard SPI for instructions, addresses, and data latched on rising SCK edge; becomes bidirectional IO0 in Dual I/O, Quad I/O, and QPI modes. |+| 6 | SCK | input | Serial Data Clock: synchronized clock for all serial input and output timing operations; supports SPI modes 0 and 3; maximum frequency 133 MHz (STR) or 66 MHz (DTR). |+| 7 | HOLD# or RESET# (IO3) | bidirectional | HOLD# or RESET# / IO3: when QE=0 acts as HOLD# (P7=0, default) or RESET# (P7=1) per Read Register; HOLD# pauses serial communication without resetting the sequence; RESET# drives hardware reset when pulled low for minimum 100 ns; becomes IO3 when QE=1 or in QPI mode. |+| 8 | VCC | power_in | Power Supply: IS25LP016D operates from 2.30 V (min) to 3.60 V (max), 3.0 V typical; active read current 4 mA (typ), standby current 8 µA (typ at 85 °C). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | ISSI Integrated Silicon Solution |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `IS25LP016D-JNLE-TR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `is25lp016d-jnle-tr-etched.step` / `is25lp016d-jnle-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `is25lp016d-jnle-tr.step` / `is25lp016d-jnle-tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [ISSI Integrated Silicon Solution datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588898805245100032) (115 pp, sha256 `b7472bc6861b38f4`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/is25lp016d-jnle-tr-datasheet.pdf)
page.jsonadded+144
@@ -0,0 +1,144 @@+{+  "slug": "is25lp016d-jnle-tr",+  "version": "0.1.0",+  "type": "component",+  "description": "ISSI Integrated Silicon Solution NOR FLASH, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "is25lp016d-jnle-tr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "is25lp016d-jnle-tr.kicad_sym",+    "is25lp016d-jnle-tr.kicad_mod",+    "is25lp016d-jnle-tr.glb",+    "is25lp016d-jnle-tr.step",+    "is25lp016d-jnle-tr.lbr",+    "docs/hero.png",+    "docs/is25lp016d-jnle-tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "IS25LP016D-JNLE-TR",+    "manufacturer": "ISSI Integrated Silicon Solution",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Memory",+    "subcategory": "NOR FLASH",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588898805245100032",+    "parts": {+      "symbol": "is25lp016d-jnle-tr.kicad_sym",+      "footprint": "is25lp016d-jnle-tr.kicad_mod",+      "model_3d": "is25lp016d-jnle-tr-etched.glb",+      "model_3d_plain": "is25lp016d-jnle-tr.glb",+      "model_3d_step": "is25lp016d-jnle-tr-etched.step",+      "model_3d_step_plain": "is25lp016d-jnle-tr.step",+      "lbr": "is25lp016d-jnle-tr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2653501"+    },+    "pins": [+      {+        "number": "1",+        "name": "CE#",+        "type": "input",+        "description": "Chip Enable (active-low): deselects device and puts outputs in high-Z when high; selects device and brings it out of standby when low; CE# must transition high-to-low after power-up before a new instruction is accepted."+      },+      {+        "number": "2",+        "name": "SO (IO1)",+        "type": "bidirectional",+        "description": "Serial Data Output / IO1: unidirectional output in standard SPI (data/status shifted out on falling SCK edge); becomes bidirectional IO1 in Dual I/O, Quad I/O, and QPI modes."+      },+      {+        "number": "3",+        "name": "WP# (IO2)",+        "type": "bidirectional",+        "description": "Write Protect / IO2: when SRWD=1 and WP# is low, Status Register bits are write-protected; WP# function is disabled and pin becomes IO2 when QE bit is set to 1."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground: connect to ground when referenced to VCC."+      },+      {+        "number": "5",+        "name": "SI (IO0)",+        "type": "bidirectional",+        "description": "Serial Data Input / IO0: unidirectional input in standard SPI for instructions, addresses, and data latched on rising SCK edge; becomes bidirectional IO0 in Dual I/O, Quad I/O, and QPI modes."+      },+      {+        "number": "6",+        "name": "SCK",+        "type": "input",+        "description": "Serial Data Clock: synchronized clock for all serial input and output timing operations; supports SPI modes 0 and 3; maximum frequency 133 MHz (STR) or 66 MHz (DTR)."+      },+      {+        "number": "7",+        "name": "HOLD# or RESET# (IO3)",+        "type": "bidirectional",+        "description": "HOLD# or RESET# / IO3: when QE=0 acts as HOLD# (P7=0, default) or RESET# (P7=1) per Read Register; HOLD# pauses serial communication without resetting the sequence; RESET# drives hardware reset when pulled low for minimum 100 ns; becomes IO3 when QE=1 or in QPI mode."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Power Supply: IS25LP016D operates from 2.30 V (min) to 3.60 V (max), 3.0 V typical; active read current 4 mA (typ), standby current 8 µA (typ at 85 °C)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 8 function (HOLD# vs RESET#) depends on P7 bit of Read Register and QE bit of Status Register - ",+          "1/8 pins cited to the wrong page (name found elsewhere): ['6:VCC@p2']"+        ],+        "pages_sent": 115,+        "cost_usd": 0.6184,+        "at": "2026-09-22T14:57:33"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588898805245100032",+        "pages": 115,+        "sha256": "b7472bc6861b38f4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file