3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIRS4428STRPBF-JSM
JSMSEMI · Gate Drivers · SOIC-8
IRS4428STRPBF-JSM from JSMSEMI, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No-connect pin, not internally connected. |
| 2 | INA | input | Channel A logic input with a pull-up resistor to VCC (tie to VCC when unused), logic high at least 2.4 V, logic low at most 0.8 V, and tolerant of inputs down to -10 V. |
| 3 | GND | power_in | Ground reference pin for the device. |
| 4 | INB | input | Channel B logic input with a pull-down resistor to GND (tie to GND when unused), logic high at least 2.4 V, logic low at most 0.8 V, and tolerant of inputs down to -10 V. |
| 5 | OUTB | output | Channel B driver output with 2 A peak current, which follows the INB input (non-inverting) according to the logic table on page 6. |
| 6 | VCC | power_in | Supply pin with a recommended operating range of 4.5 V to 20 V and an absolute maximum of 25 V. |
| 7 | OUTA | output | Channel A driver output with 2 A peak current, which is inverted relative to the INA input according to the logic table on page 6. |
| 8 | NC | unconnected | No-connect pin, not internally connected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOIC-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
IRS4428STRPBF-JSM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
irs4428strpbf-jsm-etched.step/irs4428strpbf-jsm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);irs4428strpbf-jsm.step/irs4428strpbf-jsm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (9 pp, sha256
3e5e75c634ca411c, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).