component
IRS25752LTRPBF
Public Made by Adomby adom
Infineon Technologies Gate Drivers, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIRS25752LTRPBF
Infineon Technologies · Gate Drivers · SOT-23-6
IRS25752LTRPBF from Infineon Technologies, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | IC supply voltage for the low-side and logic circuitry, recommended 10 V to 18 V with an absolute maximum of -0.3 V to 20 V. |
| 2 | COM | power_in | IC power and signal ground, which is the reference for all voltage parameters; logic operational for VS of -8 V to +600 V. |
| 3 | IN | input | Logic input with Schmitt-trigger and internal pull-down, with VIH of 2.2 V maximum and VIL of 0.8 V minimum, referenced to COM and up to VCC. |
| 4 | VS | power_in | High-side floating supply offset voltage, recommended from COM - 8 V to 600 V, with dV/dt limited to 50 V/ns. |
| 5 | HO | output | High-side gate driver output, in phase with IN, with typical source current of 160 mA and sink current of 240 mA. |
| 6 | VB | power_in | High-side floating supply voltage, recommended from VS + 10 V to VS + 18 V with an absolute maximum of -0.3 V to 620 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOT-23-6 |
| Category | Motor Driver ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High side floating absolute voltage | VB | -0.3 | 620 | V | 3 | ||
| Low side and logic fixed supply voltage | VCC | -0.3 | 20 | V | 3 | ||
| High side floating supply offset voltage slew rate | dVS/dt | 50 | V/ns | 3 | |||
| Junction temperature | TJ | -55 | 150 | ºC | 3 | ||
| IC Pin temperature (soldering) | TL | 300 | ºC | soldering, 10 seconds | 3 | ||
| Thermal resistance, junction to ambient 6L-SOT-23 | RΘJA | 151 | ºC/W | 6L-SOT-23; board mounted and still air (section note) | 3 | ||
| High side floating supply offset voltage | VS | 600 | V | 3 | |||
| Low side and logic fixed supply voltage | VCC | 10 | 18 | V | 3 | ||
| Junction temperature | TJ | -40 | 125 | ºC | 3 | ||
| VCC supply UVLO positive-going | VCCUV+ | 8 | 9 | 10 | V | 4 | |
| VCC supply UVLO negative-going | VCCUV- | 7 | 8 | 9 | V | 4 | |
| Logic 1 input voltage | VIH | 2.2 | V | 4 | |||
| Logic 0 input voltage | VIL | 0.8 | V | 4 | |||
| Logic 1 input bias current | IIN+ | 20 | 40 | µA | VIN = VCC | 4 | |
| Logic 0 input bias current | IIN- | 5 | µA | VIN = COM | 4 | ||
| VBS supply UVLO positive-going | VBSUV+ | 8 | 9 | 10 | V | 4 | |
| VBS supply UVLO negative-going | VBSUV- | 7 | 8 | 9 | V | 4 | |
| High level output voltage (VB, HO) | VOH | 0.8 | 1.4 | V | IO = 2mA | 4 | |
| Low level output voltage (HO, VS) | VOL | 0.3 | 0.6 | V | 4 | ||
| Offset supply leakage current | ILK | 50 | µA | VB = VS = 600V | 4 | ||
| VCC internal Zener clamp voltage | VCC_CLAMP | 20.4 | V | ICC = 5mA | 4 | ||
| Quiescent VCC supply current | IQCC | 100 | µA | 4 | |||
| VBS internal Zener clamp voltage | VBS_CLAMP | 20.4 | V | IBS = 5mA | 4 | ||
| Quiescent VBS supply current | IQBS | 80 | µA | VIN = VCC or COM | 4 | ||
| Turn-on propagation delay | tON | 140 | ns | VS = 0V | 4 | ||
| Turn-off propagation delay | tOFF | 215 | ns | VS = 600V | 4 | ||
| Turn-on rise time | tRISE | 85 | ns | VS = 0V | 4 | ||
| Turn-off fall time | tFALL | 40 | ns | 4 | |||
| HO gate drive output source current | IO+ | 160 | mA | 4 | |||
| HO gate drive output sink current | IO- | 240 | mA | 4 |
CAD (KiCad official)
- Symbol:
IRS25752LTRPBF - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
irs25752ltrpbf-etched.step/irs25752ltrpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);irs25752ltrpbf.step/irs25752ltrpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (13 pp, sha256
46a851b409014314, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).