Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IRS2113STR

UMW · Gate Drive ICs · SOP-16-300mil

IRS2113STR from UMW, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 LO output Low side gate drive output, rated VLO from 0V to VCC with a typical 4A source/sink capability.
2 COM power_in Low side return, the reference for the low side driver.
3 VCC power_in Low side supply, recommended 10V to 20V and absolute maximum 25V.
4 NC unconnected No connect.
5 NC unconnected No connect.
6 VS power_in High side floating supply return, recommended -9V to 700V.
7 VB power_in High side floating supply, recommended VS+10V to VS+20V and absolute maximum 725V.
8 HO output High side gate drive output, rated VHO from VS to VB with a typical 4A source/sink capability.
9 NC unconnected No connect.
10 NC unconnected No connect.
11 VDD power_in Logic supply, recommended VSS+3V to VSS+20V.
12 HIN input Logic input for high side gate driver output HO, in phase, recommended 0V to VCC.
13 SD input Logic input for shutdown.
14 LIN input Logic input for low side gate driver output LO, in phase, recommended 0V to VCC.
15 VSS power_in Logic ground, recommended -5V to 5V relative to COM.
16 NC unconnected No connect.

Key specifications

Parameter Value
Manufacturer UMW
Package SOP-16-300mil
Category Power Management
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High side floating supply voltage (VB), absolute maximum VB -0.3 725 V All voltage parameters referenced to VSS; TA=25°C 4
Low side and main power supply (VCC), absolute maximum VCC -0.3 25 V All voltage parameters referenced to VSS; TA=25°C 4
Logic supply (VDD), absolute maximum VDD -0.3 V All voltage parameters referenced to VSS; TA=25°C; printed max = VSS+25 (relative, not numeric) 4
Low side gate drive output (VLO), absolute maximum VLO -0.3 V All voltage parameters referenced to VSS; TA=25°C; printed max = VCC+0.3 (relative, not numeric) 4
Logic input of HIN & LIN (VIN), absolute maximum VIN -0.3 V All voltage parameters referenced to VSS; TA=25°C; printed max = VCC+0.3 (relative, not numeric) 4
Allowable offset supply voltage transient (dVS/dt), absolute maximum dVS/dt 50 V/ns Allowable offset supply voltage transient 4
Package power dissipation PD 625 mW TA ≤25°C 4
Thermal resistance, junction to ambient RthJA 200 W/°C Unit as printed in the datasheet table (W/°C); see review_required 4
Junction temperature TJ 150 °C 4
Storage temperature TS -55 150 °C 4
Lead temperature (soldering) TL 300 °C Soldering, 10 seconds 4
High side floating supply voltage (VS), recommended operating VS -9 700 V Referenced to VSS; bias ratings of VS measured at 15V supply; TA=25°C 5
Low side and main power supply (VCC), recommended operating VCC 10 20 V Referenced to VSS; bias ratings of VS and VSS measured at 15V supply; TA=25°C 5
Low side gate drive output (VLO), recommended operating VLO 0 V Referenced to VSS; printed max = VCC (relative, not numeric) 5
Logic ground (VSS), recommended operating VSS -5 5 V Referenced to VSS; TA=25°C 5
Logic input of HIN & LIN (VIN), recommended operating VIN 0 V Referenced to VSS; printed max = VCC (relative, not numeric) 5
Ambient temperature, recommended operating TA -40 125 °C 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: IRS2113STR
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOP-16-300mil, generated on the KiCad land (body 7.5 x 10.325 mm, terminals on the pads, 2.65 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: irs2113str-etched.step / irs2113str-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); irs2113str.step / irs2113str.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (12 pp, sha256 bb95f76664b0b301, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF