main
Ray
irs20957strpbf: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
7a86afb
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255
{
"schema_version": 1,
"type": "component",
"slug": "irs20957strpbf",
"title": "IRS20957STRPBF",
"brief": "Infineon Audio Power OpAmps, SOIC-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.2.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"op-amp-cmp",
"irs20957strpbf"
],
"component": {
"mpn": "IRS20957STRPBF",
"manufacturer": "Infineon",
"package": "SOIC-16",
"pin_count": 16,
"category": "Op-amp/Cmp",
"subcategory": "Audio Power OpAmps",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/95da293c563bc406fc43040fe486dc88.pdf",
"parts": {
"symbol": "irs20957strpbf.kicad_sym",
"footprint": "irs20957strpbf.kicad_mod",
"model_3d": "irs20957strpbf-etched.glb",
"model_3d_plain": "irs20957strpbf.glb",
"model_3d_step": "irs20957strpbf-etched.step",
"model_3d_step_plain": "irs20957strpbf.step",
"lbr": "irs20957strpbf.lbr"
},
"distributor_links": {
"lcsc": "C78075"
},
"pins": [
{
"number": "1",
"name": "VDD",
"type": "power_in",
"description": "Floating input positive supply. Referenced to VSS. Absolute max -0.3 V to (VSS+... clamped by internal 10.2 V zener). Recommended operating around 5 V above VSS for logic-side power."
},
{
"number": "2",
"name": "CSD",
"type": "input",
"description": "Shutdown timing capacitor pin, referenced to VSS. External capacitor sets the charge/discharge timing for the protection reset function. Voltage range VSS-0.3 V to VDD+0.3 V."
},
{
"number": "3",
"name": "IN",
"type": "input",
"description": "PWM non-inverting input, in phase with HO. Compatible with 3.3 V / 5 V logic levels referenced to VSS. Voltage range VSS-0.3 V to VDD+0.3 V."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Floating input supply return. Local ground reference for the floating PWM input section (VDD, CSD, IN). Can float up to ~200 V with respect to COM."
},
{
"number": "5",
"name": "NC",
"type": "unconnected",
"description": "No connect. Leave floating or tie per application notes."
},
{
"number": "6",
"name": "VREF",
"type": "power_out",
"description": "5.1 V reference output, referenced to COM. Used with an external resistor divider to set the OCSET over-current threshold. Max output current 5 mA."
},
{
"number": "7",
"name": "OCSET",
"type": "input",
"description": "Low-side over-current threshold setting input, referenced to COM. External resistor divider from VREF programs the low-side OC trip point. Voltage range -0.3 V to VCC+0.3 V."
},
{
"number": "8",
"name": "DT",
"type": "input",
"description": "Input for programmable dead-time selection, referenced to COM. Sets one of four preset dead-time values (15/25/35/80 ns) based on the applied voltage level. Range -0.3 V to VCC+0.3 V."
},
{
"number": "9",
"name": "COM",
"type": "power_in",
"description": "Low-side supply return / device ground. Reference for VCC, LO, DT, OCSET, VREF, and the absolute-max voltage reference for the entire part."
},
{
"number": "10",
"name": "LO",
"type": "output",
"description": "Low-side gate drive output. Drives the low-side power MOSFET gate; swings between COM and VCC. Typical peak sink 1.2 A / source 1.0 A. Internal 20.4 V clamp to COM."
},
{
"number": "11",
"name": "VCC",
"type": "power_in",
"description": "Low-side fixed supply, referenced to COM. Typically 12 V (absolute max 20 V). Contains an internal shunt zener; observe clamp current limits."
},
{
"number": "12",
"name": "NC",
"type": "unconnected",
"description": "No connect. Leave floating or tie per application notes."
},
{
"number": "13",
"name": "VS",
"type": "power_in",
"description": "High-side floating supply return. Connects to the switching node between the high-side and low-side power MOSFETs. Range VB-15 V to VB+0.3 V; tolerates -100 V to +100 V bus operation."
},
{
"number": "14",
"name": "HO",
"type": "output",
"description": "High-side floating gate drive output. Drives the high-side power MOSFET; swings between VS and VB. Typical peak sink 1.2 A / source 1.0 A. Internal 15.3 V clamp to VS."
},
{
"number": "15",
"name": "VB",
"type": "power_in",
"description": "High-side floating supply (bootstrap). Referenced to VS. Absolute max 215 V with respect to COM; supplied via bootstrap capacitor/diode from VCC."
},
{
"number": "16",
"name": "CSH",
"type": "input",
"description": "High-side over-current sensing input, referenced to VS. Senses the drain-source voltage of the high-side MOSFET (RDS(on) sensing) for bi-directional over-current detection. Range VS-0.3 V to VB+0.3 V."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/95da293c563bc406fc43040fe486dc88.pdf",
"pages": 18,
"sha256": "7abc11de07f6d4e9",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"pin1": {
"pad": "1",
"at": [
-2.475,
-4.445
],
"corner": "top-left",
"source": "silk-marker",
"derived_from": "SOIC-16_3.9x9.9mm_P1.27mm@sha256:f9b5075740f7816c",
"mark": "drawn"
},
"models_3d": [
{
"file": "irs20957strpbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "irs20957strpbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "f40c2ff91317cde7bb97b09e85a7eaf38902ad3841035c58ecd60c7e7d9a4a48",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Infineon",
"Package": "SOIC-16",
"Category": "Op-amp/Cmp",
"Pins": "16"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"irs20957strpbf"
],
"discovery_pitch": "IRS20957STRPBF (Infineon) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"irs20957strpbf.kicad_sym",
"irs20957strpbf.kicad_mod",
"irs20957strpbf.glb",
"irs20957strpbf.step",
"irs20957strpbf-etched.step",
"irs20957strpbf.lbr",
"docs/hero.png",
"docs/irs20957strpbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "IRS20957STRPBF",
"kind": "packaging"
}
],
"updated_at": "2026-09-24T22:57:19.666Z"
}