component
IRF9620PBF
Public Made by Adomby adom
Vishay Intertech MOSFETs, ITO-220AB-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIRF9620PBF
Vishay Intertech · MOSFETs · ITO-220AB-3
IRF9620PBF from Vishay Intertech, in a ITO-220AB-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | G | input | Gate of the P-channel MOSFET, with a maximum gate-source voltage of ±20 V and a gate threshold of -2.0 V to -4.0 V. |
| 2 | D | passive | Drain of the P-channel MOSFET, rated for VDS of -200 V and continuous ID of -3.5 A at TC = 25 °C; this pin is also connected to the mounting tab, and RthJC is 3.1 °C/W max junction-to-case (drain). |
| 3 | S | passive | Source of the P-channel MOSFET, carrying up to -3.5 A continuous and -14 A pulsed through the body diode (IS and ISM). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | ITO-220AB-3 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Drain-Source Breakdown Voltage | VDS | -200 | V | VGS = 0 V, ID = - 250 μA | 2 | ||
| Gate-Source Threshold Voltage | VGS(th) | -4 | -2 | V | VDS = VGS, ID = - 250 μA | 2 | |
| Gate-Source Leakage | IGSS | -100 | 100 | nA | VGS = ± 20 V | 2 | |
| Zero Gate Voltage Drain Current | IDSS | -100 | μA | VDS = - 200 V, VGS = 0 V | 2 | ||
| Zero Gate Voltage Drain Current (125 °C) | IDSS | -500 | μA | VDS = - 160 V, VGS = 0 V, TJ = 125 °C | 2 | ||
| Drain-Source On-State Resistance | RDS(on) | 1.5 | Ω | VGS = - 10 V, ID = - 1.5 A | 2 | ||
| Forward Transconductance | gfs | 1 | S | VDS = - 50 V, ID = - 1.5 A | 2 | ||
| Total Gate Charge | Qg | 22 | nC | VGS = - 10 V, ID = - 4.0 A, VDS = - 160 V | 2 | ||
| Gate-Source Charge | Qgs | 12 | nC | VGS = - 10 V, ID = - 4.0 A, VDS = - 160 V | 2 | ||
| Gate-Drain Charge | Qgd | 10 | nC | VGS = - 10 V, ID = - 4.0 A, VDS = - 160 V | 2 | ||
| Continuous Source-Drain Diode Current | IS | -3.5 | A | MOSFET symbol showing integral reverse p-n junction diode | 2 | ||
| Pulsed Diode Forward Current | ISM | -14 | A | MOSFET symbol showing integral reverse p-n junction diode | 2 | ||
| Body Diode Voltage | VSD | -7 | V | TJ = 25 °C, IS = - 3.5 A, VGS = 0 V | 2 | ||
| Body Diode Reverse Recovery Time | trr | 300 | 450 | ns | TJ = 25 °C, IF = - 3.5 A, dI/dt = 100 A/μs | 2 | |
| Body Diode Reverse Recovery Charge | Qrr | 1.9 | 2.9 | μC | TJ = 25 °C, IF = - 3.5 A, dI/dt = 100 A/μs | 2 | |
| Drain-Source Voltage | VDS | -200 | V | TC = 25 °C | 1 | ||
| Gate-Source Voltage | VGS | -20 | 20 | V | TC = 25 °C | 1 | |
| Continuous Drain Current | ID | -3.5 | A | VGS at - 10 V, TC = 25 °C | 1 | ||
| Continuous Drain Current | ID | -2 | A | VGS at - 10 V, TC = 100 °C | 1 | ||
| Pulsed Drain Current | IDM | -14 | A | TC = 25 °C | 1 | ||
| Linear Derating Factor | 0.32 | W/°C | TC = 25 °C | 1 | |||
| Maximum Power Dissipation | PD | 40 | W | TC = 25 °C | 1 | ||
| Peak Diode Recovery dV/dt | dV/dt | -5 | V/ns | ISD ≤ 3.5 A, TJ ≤ 150 °C | 1 | ||
| Operating Junction and Storage Temperature Range | TJ, Tstg | -55 | 150 | °C | 1 | ||
| Soldering Recommendations (Peak Temperature) | 300 | °C | for 10 s, 1.6 mm from case | 1 | |||
| Maximum Junction-to-Ambient | RthJA | 62 | °C/W | 2 | |||
| Maximum Junction-to-Case (Drain) | RthJC | 3.1 | °C/W | 2 | |||
| Case-to-Sink, Flat, Greased Surface | RthCS | 0.5 | °C/W | 2 | |||
| VDS Temperature Coefficient | ΔVDS/ΔTJ | -0.22 | V/°C | Reference to 25 °C, ID = - 1 mA | 2 | ||
| Input Capacitance | Ciss | 350 | pF | VGS = 0 V, VDS = - 25 V, f = 1.0 MHz | 2 | ||
| Output Capacitance | Coss | 100 | pF | VGS = 0 V, VDS = - 25 V, f = 1.0 MHz | 2 | ||
| Reverse Transfer Capacitance | Crss | 30 | pF | VGS = 0 V, VDS = - 25 V, f = 1.0 MHz | 2 | ||
| Turn-On Delay Time | td(on) | 15 | ns | VDD = - 100 V, ID = - 1.5 A, Rg = 50 Ω, RD = 67 Ω | 2 | ||
| Rise Time | tr | 25 | ns | VDD = - 100 V, ID = - 1.5 A, Rg = 50 Ω, RD = 67 Ω | 2 | ||
| Turn-Off Delay Time | td(off) | 20 | ns | VDD = - 100 V, ID = - 1.5 A, Rg = 50 Ω, RD = 67 Ω | 2 | ||
| Fall Time | tf | 15 | ns | VDD = - 100 V, ID = - 1.5 A, Rg = 50 Ω, RD = 67 Ω | 2 | ||
| Internal Drain Inductance | LD | 4.5 | nH | Between lead, 6 mm (0.25") from package and center of die contact | 2 | ||
| Internal Source Inductance | LS | 7.5 | nH | Between lead, 6 mm (0.25") from package and center of die contact | 2 |
CAD (KiCad official)
- Symbol:
IRF9620PBF - Footprint:
Package_TO_SOT_THT:TO-220F-3_Vertical - 3D model: ITO-220AB-3 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (8 pp, sha256
2edf72103edd0393, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).