main
History Download
Ray Initial commit: component/ir21531strpbf 53091e6

IR21531STRPBF

Infineon Technologies · Gate Drivers · SOIC-8

IR21531STRPBF from Infineon Technologies, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Logic and internal gate drive supply voltage; operating range 10 V to VCLAMP; 15.6 V typ zener clamp; rising UVLO threshold 9.0 V typ, quiescent supply current 500 µA typ.
2 RT passive Oscillator timing resistor pin; sets oscillator frequency via external resistor (≥10 kΩ) to COM; internal circuitry swings pin between VRT+ (VCC − 10 mV typ) and VRT- (10 mV typ).
3 CT passive Oscillator timing capacitor pin; internal ramp swings between 4.0 V and 8.0 V thresholds (VCC = 12 V); pulling CT below 2.1 V typ shuts down both gate driver outputs; recommended CT ≥ 330 pF.
4 COM power_in IC power and signal ground; all low-side voltages and logic thresholds are referenced to this pin.
5 LO output Low-side gate driver output; in phase with RT; VOH = VCC, VOL = 0 V (0 mV typ at IO = 0 A); rise time 80 ns typ / 150 ns max, fall time 45 ns typ / 100 ns max.
6 VS power_in High-side floating supply offset voltage (switched node); steady-state range −3.0 V to 600 V referenced to COM; allowable dVS/dt ±50 V/ns; absolute min VB − 25 V.
7 HO output High-side gate driver output; floating output referenced to VS; VOH = VB − 0 mV typ (IO = 0 A), VOL = VS + 0 mV typ; rise time 80 ns typ, fall time 45 ns typ; deadtime 0.60 µs typ.
8 VB power_in High-side floating supply voltage; range VCC − 0.7 V to VCLAMP under recommended operation; absolute maximum 625 V; minimum VBS (VB − VS) = 4.0-5.0 V required for proper HO operation.

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package SOIC-8
Category Motor Driver ICs
Pins 8

CAD (KiCad official)

  • Symbol: IR21531STRPBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ir21531strpbf-etched.step / ir21531strpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ir21531strpbf.step / ir21531strpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (9 pp, sha256 33ffe0a7ca01b7a2, retrieved 2026-09-21, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-4-6 (text+vision), consensus claude-opus-4-7 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF