← Commit history

Initial commit: component/ips2550de1r

Ray ·258e74cfd5 ·
2 files changed +252
README.mdadded+53
@@ -0,0 +1,53 @@+# IPS2550DE1R++**RENESAS** · Position Sensors · TSSOP-16-EP++IPS2550DE1R from RENESAS, in a TSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ADR_IRQN | bidirectional | Address-select digital input for I2C slave address selection via pull-up or pull-down resistor RADR, or programmable push/pull interrupt output for diagnostic signals. |+| 2 | RX1 | input | Analog input for receiver coil 1; sine signal in ASIL-C mode (default) or sine signal in compatibility mode. |+| 3 | RX2 | input | Analog input for receiver coil 2; cosine signal in ASIL-C mode (default) or inverted sine signal in compatibility mode. |+| 4 | RX3 | input | Analog input for receiver coil 3; inverted sine signal in ASIL-C mode (default) or cosine signal in compatibility mode. |+| 5 | RX4 | input | Analog input for receiver coil 4; inverted cosine signal in both ASIL-C configuration mode and compatibility mode. |+| 6 | TX1 | bidirectional | Transmitter coil connection point 1; connects to resonant LC oscillator circuit with external capacitor CTx1 to GND and coil inductance L. |+| 7 | TX2 | bidirectional | Transmitter coil connection point 2; connects to resonant LC oscillator circuit with external capacitor CTx2 to GND and coil inductance L. |+| 8 | VDDA | power_in | Internally regulated analog supply voltage (2.85-3.1V in 3.3V mode, 3.9-4.1V in 5V mode); requires external 100nF capacitor CVA to GND. |+| 9 | GND | power_in | Common ground connection for all supply and signal returns. |+| 10 | VDD | power_in | External power supply voltage (3.3V±0.3V or 5.0V±0.5V); requires external 70nF capacitor CVDD to GND. |+| 11 | COSN | output | Buffered inverted cosine analog output with VDD/2 DC bias; output range 0.4V to (VDD-0.4V) for ±2.5mA load. |+| 12 | COS_SDA | bidirectional | Buffered cosine analog output (VDD/2 bias, output range 0.4V to VDD-0.4V) or open-drain I2C serial data line (3mA sink current) during programming mode. |+| 13 | SINN | output | Buffered inverted sine analog output with VDD/2 DC bias; output range 0.4V to (VDD-0.4V) for ±2.5mA load. |+| 14 | SIN_SCL | bidirectional | Buffered sine analog output (VDD/2 bias, output range 0.4V to VDD-0.4V) or I2C serial clock line during programming mode. |+| 15 | SCL | input | Digital I2C clock input for programming and diagnostic interface (0-100 kHz max frequency); requires external pull-up resistor RSCL (1.8-4.7kΩ) to VDD. |+| 16 | SDA | bidirectional | Open-drain bidirectional I2C serial data line for programming and diagnostics (3mA sink current capability); requires external pull-up resistor RSDA (1.8-4.7kΩ) to VDD. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | RENESAS |+| Package | TSSOP-16-EP |+| Category | Sensors |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `IPS2550DE1R`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `ips2550de1r-etched.step` / `ips2550de1r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ips2550de1r.step` / `ips2550de1r.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [RENESAS datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904371724951552) (52 pp, sha256 `04bb0038dd02e7fb`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ips2550de1r-datasheet.pdf)
page.jsonadded+199
@@ -0,0 +1,199 @@+{+  "slug": "ips2550de1r",+  "version": "0.1.0",+  "type": "component",+  "description": "RENESAS Position Sensors, TSSOP-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "ips2550de1r",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ips2550de1r.kicad_sym",+    "ips2550de1r.kicad_mod",+    "ips2550de1r.glb",+    "ips2550de1r.step",+    "ips2550de1r.lbr",+    "docs/hero.png",+    "docs/ips2550de1r-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "IPS2550DE1R",+    "manufacturer": "RENESAS",+    "package": "TSSOP-16-EP",+    "pin_count": 17,+    "category": "Sensors",+    "subcategory": "Position Sensors",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904371724951552",+    "parts": {+      "symbol": "ips2550de1r.kicad_sym",+      "footprint": "ips2550de1r.kicad_mod",+      "model_3d": "ips2550de1r-etched.glb",+      "model_3d_plain": "ips2550de1r.glb",+      "model_3d_step": "ips2550de1r-etched.step",+      "model_3d_step_plain": "ips2550de1r.step",+      "lbr": "ips2550de1r.lbr"+    },+    "distributor_links": {+      "lcsc": "C7528042"+    },+    "pins": [+      {+        "number": "1",+        "name": "ADR_IRQN",+        "type": "bidirectional",+        "description": "Address-select digital input for I2C slave address selection via pull-up or pull-down resistor RADR, or programmable push/pull interrupt output for diagnostic signals."+      },+      {+        "number": "2",+        "name": "RX1",+        "type": "input",+        "description": "Analog input for receiver coil 1; sine signal in ASIL-C mode (default) or sine signal in compatibility mode."+      },+      {+        "number": "3",+        "name": "RX2",+        "type": "input",+        "description": "Analog input for receiver coil 2; cosine signal in ASIL-C mode (default) or inverted sine signal in compatibility mode."+      },+      {+        "number": "4",+        "name": "RX3",+        "type": "input",+        "description": "Analog input for receiver coil 3; inverted sine signal in ASIL-C mode (default) or cosine signal in compatibility mode."+      },+      {+        "number": "5",+        "name": "RX4",+        "type": "input",+        "description": "Analog input for receiver coil 4; inverted cosine signal in both ASIL-C configuration mode and compatibility mode."+      },+      {+        "number": "6",+        "name": "TX1",+        "type": "bidirectional",+        "description": "Transmitter coil connection point 1; connects to resonant LC oscillator circuit with external capacitor CTx1 to GND and coil inductance L."+      },+      {+        "number": "7",+        "name": "TX2",+        "type": "bidirectional",+        "description": "Transmitter coil connection point 2; connects to resonant LC oscillator circuit with external capacitor CTx2 to GND and coil inductance L."+      },+      {+        "number": "8",+        "name": "VDDA",+        "type": "power_in",+        "description": "Internally regulated analog supply voltage (2.85-3.1V in 3.3V mode, 3.9-4.1V in 5V mode); requires external 100nF capacitor CVA to GND."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Common ground connection for all supply and signal returns."+      },+      {+        "number": "10",+        "name": "VDD",+        "type": "power_in",+        "description": "External power supply voltage (3.3V±0.3V or 5.0V±0.5V); requires external 70nF capacitor CVDD to GND."+      },+      {+        "number": "11",+        "name": "COSN",+        "type": "output",+        "description": "Buffered inverted cosine analog output with VDD/2 DC bias; output range 0.4V to (VDD-0.4V) for ±2.5mA load."+      },+      {+        "number": "12",+        "name": "COS_SDA",+        "type": "bidirectional",+        "description": "Buffered cosine analog output (VDD/2 bias, output range 0.4V to VDD-0.4V) or open-drain I2C serial data line (3mA sink current) during programming mode."+      },+      {+        "number": "13",+        "name": "SINN",+        "type": "output",+        "description": "Buffered inverted sine analog output with VDD/2 DC bias; output range 0.4V to (VDD-0.4V) for ±2.5mA load."+      },+      {+        "number": "14",+        "name": "SIN_SCL",+        "type": "bidirectional",+        "description": "Buffered sine analog output (VDD/2 bias, output range 0.4V to VDD-0.4V) or I2C serial clock line during programming mode."+      },+      {+        "number": "15",+        "name": "SCL",+        "type": "input",+        "description": "Digital I2C clock input for programming and diagnostic interface (0-100 kHz max frequency); requires external pull-up resistor RSCL (1.8-4.7kΩ) to VDD."+      },+      {+        "number": "16",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Open-drain bidirectional I2C serial data line for programming and diagnostics (3mA sink current capability); requires external pull-up resistor RSDA (1.8-4.7kΩ) to VDD."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin SIN_SCL (pin 14) classified as bidirectional based on dual-mode operation: functions as analog s",+          "exposed pad 17 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 52,+        "cost_usd": 0.5088,+        "at": "2026-09-21T22:34:27"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904371724951552",+        "pages": 52,+        "sha256": "04bb0038dd02e7fb",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file