← Commit history

Initial commit: component/ip804ar

Ray ·28b9d9c728 ·
2 files changed +476
README.mdadded+85
@@ -0,0 +1,85 @@+# IP804AR++**IC Plus** · Ethernet Transceivers · QFN-48(7x7)++IP804AR from IC Plus, in a QFN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AGND | power_in | Analog ground connection. |+| 2 | NC | unconnected | No connection. |+| 3 | PortN0 | bidirectional | Port 0 return pin for the power interface carrying negative side of PoE supply path. |+| 4 | NC | unconnected | No connection. |+| 5 | PortN1 | bidirectional | Port 1 return pin for the power interface carrying negative side of PoE supply path. |+| 6 | AGND | power_in | Analog ground connection. |+| 7 | NC | unconnected | No connection. |+| 8 | PortN2 | bidirectional | Port 2 return pin for the power interface carrying negative side of PoE supply path. |+| 9 | NC | unconnected | No connection. |+| 10 | PortN3 | bidirectional | Port 3 return pin for the power interface carrying negative side of PoE supply path. |+| 11 | AGND | power_in | Analog ground connection. |+| 12 | AGND | power_in | Analog ground connection. |+| 13 | SCAN0 | input | Operation mode selection pin; refer to section 5.2 table 2 for mode configuration. |+| 14 | SCAN1 | input | Operation mode selection pin latched at reset; must be connected to AGND for normal operation. |+| 15 | Vrext | unconnected | Internal use only, no connection required. |+| 16 | NC | unconnected | No connection. |+| 17 | V54 | power_in | Main power supply input (44V to 57V) requiring 1µF and 47µF/100V capacitors to AGND. |+| 18 | NC | unconnected | No connection. |+| 19 | V5 | power_in | Internal 5V power supply for internal use only; add 4.7µF capacitor to AGND. |+| 20 | V3P3 | power_in | 3.3V power supply providing up to 6mA external device current when EnB_Reg is low, or external 3.3V input when EnB_Reg is high; add 4.7µF capacitor to AGND. |+| 21 | V1P8 | power_in | Internal 1.8V power supply for internal use only; add 4.7µF capacitor to AGND. |+| 22 | VPP | power_in | eFuse power supply pin connected to V5. |+| 23 | In_Top | power_in | Bias current source pin that must be connected to AGND for normal operation. |+| 24 | EnB_Reg | input | Enable/Disable control for internal 3.3V regulator selecting between active regulation or external 3.3V supply. |+| 25 | AGND | power_in | Analog ground connection. |+| 26 | AGND | power_in | Analog ground connection. |+| 27 | AGND | power_in | Analog ground connection. |+| 28 | ALT_A/B | input | Alternative A/B type selection pin latched at power-on reset (0=ALT_A default, 1=ALT_B) to define wiring configuration. |+| 29 | 24V_En | input | 24V enable pin latched at power-on reset (0=disable default, 1=enable) for 24V low voltage applications. |+| 30 | 4Pair_En | input | 4-Pair high power mode enable pin latched at power-on reset (0=disable default, 1=enable). |+| 31 | AGND | power_in | Analog ground connection. |+| 32 | P0LED | output | Direct LED output for Port 0 status indication. |+| 33 | P1LED | output | Direct LED output for Port 1 status indication. |+| 34 | P2LED | output | Direct LED output for Port 2 status indication. |+| 35 | P3LED | output | Direct LED output for Port 3 status indication. |+| 36 | Overload | output | Direct LED output for system overload or temperature warning indication. |+| 37 | LED_CLK | tri_state | Serial LED clock output as open-drain; refer to section 5.11 for LED interface details. |+| 38 | LED_DAT | tri_state | Serial LED data output as open-drain. |+| 39 | SCL/EE_CLK | tri_state | I2C clock input in manual mode or EEPROM clock output in auto mode as open-drain. |+| 40 | SDAO | tri_state | I2C serial data output as open-drain. |+| 41 | SDAI/EE_DAT | tri_state | I2C serial data input in manual mode or EEPROM data input in auto mode. |+| 42 | INTB | tri_state | Interrupt output as open-drain and active low. |+| 43 | DGND | power_in | Digital ground connection that must be connected to AGND. |+| 44 | DV3P3 | power_in | Digital 3.3V power requiring 4.7µF capacitor to DGND and connection to V3P3. |+| 45 | RstN | input | Active-low reset input signal to reset IP804AR. |+| 46 | AD2 | input | I2C device address selection bit 2 latched at power-on reset per section 5.3. |+| 47 | AD1 | input | I2C device address selection bit 1 latched at power-on reset per section 5.3. |+| 48 | AD0 | input | I2C device address selection bit 0 latched at power-on reset per section 5.3. |+| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | IC Plus |+| Package | QFN-48(7x7) |+| Category | Interface |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `IP804AR`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: QFN-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `ip804ar-etched.step` / `ip804ar-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ip804ar.step` / `ip804ar.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [IC Plus datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590919292626157568) (59 pp, sha256 `eddd34f0b55a6cd4`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ip804ar-datasheet.pdf)
page.jsonadded+391
@@ -0,0 +1,391 @@+{+  "slug": "ip804ar",+  "version": "0.1.0",+  "type": "component",+  "description": "IC Plus Ethernet Transceivers, QFN-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "ip804ar",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ip804ar.kicad_sym",+    "ip804ar.kicad_mod",+    "ip804ar.glb",+    "ip804ar.step",+    "ip804ar.lbr",+    "docs/hero.png",+    "docs/ip804ar-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "IP804AR",+    "manufacturer": "IC Plus",+    "package": "QFN-48(7x7)",+    "pin_count": 49,+    "category": "Interface",+    "subcategory": "Ethernet Transceivers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590919292626157568",+    "parts": {+      "symbol": "ip804ar.kicad_sym",+      "footprint": "ip804ar.kicad_mod",+      "model_3d": "ip804ar-etched.glb",+      "model_3d_plain": "ip804ar.glb",+      "model_3d_step": "ip804ar-etched.step",+      "model_3d_step_plain": "ip804ar.step",+      "lbr": "ip804ar.lbr"+    },+    "distributor_links": {+      "lcsc": "C19626921"+    },+    "pins": [+      {+        "number": "1",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground connection."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "3",+        "name": "PortN0",+        "type": "bidirectional",+        "description": "Port 0 return pin for the power interface carrying negative side of PoE supply path."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "5",+        "name": "PortN1",+        "type": "bidirectional",+        "description": "Port 1 return pin for the power interface carrying negative side of PoE supply path."+      },+      {+        "number": "6",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground connection."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "8",+        "name": "PortN2",+        "type": "bidirectional",+        "description": "Port 2 return pin for the power interface carrying negative side of PoE supply path."+      },+      {+        "number": "9",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "10",+        "name": "PortN3",+        "type": "bidirectional",+        "description": "Port 3 return pin for the power interface carrying negative side of PoE supply path."+      },+      {+        "number": "11",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground connection."+      },+      {+        "number": "12",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground connection."+      },+      {+        "number": "13",+        "name": "SCAN0",+        "type": "input",+        "description": "Operation mode selection pin; refer to section 5.2 table 2 for mode configuration."+      },+      {+        "number": "14",+        "name": "SCAN1",+        "type": "input",+        "description": "Operation mode selection pin latched at reset; must be connected to AGND for normal operation."+      },+      {+        "number": "15",+        "name": "Vrext",+        "type": "unconnected",+        "description": "Internal use only, no connection required."+      },+      {+        "number": "16",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "17",+        "name": "V54",+        "type": "power_in",+        "description": "Main power supply input (44V to 57V) requiring 1µF and 47µF/100V capacitors to AGND."+      },+      {+        "number": "18",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "19",+        "name": "V5",+        "type": "power_in",+        "description": "Internal 5V power supply for internal use only; add 4.7µF capacitor to AGND."+      },+      {+        "number": "20",+        "name": "V3P3",+        "type": "power_in",+        "description": "3.3V power supply providing up to 6mA external device current when EnB_Reg is low, or external 3.3V input when EnB_Reg is high; add 4.7µF capacitor to AGND."+      },+      {+        "number": "21",+        "name": "V1P8",+        "type": "power_in",+        "description": "Internal 1.8V power supply for internal use only; add 4.7µF capacitor to AGND."+      },+      {+        "number": "22",+        "name": "VPP",+        "type": "power_in",+        "description": "eFuse power supply pin connected to V5."+      },+      {+        "number": "23",+        "name": "In_Top",+        "type": "power_in",+        "description": "Bias current source pin that must be connected to AGND for normal operation."+      },+      {+        "number": "24",+        "name": "EnB_Reg",+        "type": "input",+        "description": "Enable/Disable control for internal 3.3V regulator selecting between active regulation or external 3.3V supply."+      },+      {+        "number": "25",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground connection."+      },+      {+        "number": "26",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground connection."+      },+      {+        "number": "27",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground connection."+      },+      {+        "number": "28",+        "name": "ALT_A/B",+        "type": "input",+        "description": "Alternative A/B type selection pin latched at power-on reset (0=ALT_A default, 1=ALT_B) to define wiring configuration."+      },+      {+        "number": "29",+        "name": "24V_En",+        "type": "input",+        "description": "24V enable pin latched at power-on reset (0=disable default, 1=enable) for 24V low voltage applications."+      },+      {+        "number": "30",+        "name": "4Pair_En",+        "type": "input",+        "description": "4-Pair high power mode enable pin latched at power-on reset (0=disable default, 1=enable)."+      },+      {+        "number": "31",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground connection."+      },+      {+        "number": "32",+        "name": "P0LED",+        "type": "output",+        "description": "Direct LED output for Port 0 status indication."+      },+      {+        "number": "33",+        "name": "P1LED",+        "type": "output",+        "description": "Direct LED output for Port 1 status indication."+      },+      {+        "number": "34",+        "name": "P2LED",+        "type": "output",+        "description": "Direct LED output for Port 2 status indication."+      },+      {+        "number": "35",+        "name": "P3LED",+        "type": "output",+        "description": "Direct LED output for Port 3 status indication."+      },+      {+        "number": "36",+        "name": "Overload",+        "type": "output",+        "description": "Direct LED output for system overload or temperature warning indication."+      },+      {+        "number": "37",+        "name": "LED_CLK",+        "type": "tri_state",+        "description": "Serial LED clock output as open-drain; refer to section 5.11 for LED interface details."+      },+      {+        "number": "38",+        "name": "LED_DAT",+        "type": "tri_state",+        "description": "Serial LED data output as open-drain."+      },+      {+        "number": "39",+        "name": "SCL/EE_CLK",+        "type": "tri_state",+        "description": "I2C clock input in manual mode or EEPROM clock output in auto mode as open-drain."+      },+      {+        "number": "40",+        "name": "SDAO",+        "type": "tri_state",+        "description": "I2C serial data output as open-drain."+      },+      {+        "number": "41",+        "name": "SDAI/EE_DAT",+        "type": "tri_state",+        "description": "I2C serial data input in manual mode or EEPROM data input in auto mode."+      },+      {+        "number": "42",+        "name": "INTB",+        "type": "tri_state",+        "description": "Interrupt output as open-drain and active low."+      },+      {+        "number": "43",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground connection that must be connected to AGND."+      },+      {+        "number": "44",+        "name": "DV3P3",+        "type": "power_in",+        "description": "Digital 3.3V power requiring 4.7µF capacitor to DGND and connection to V3P3."+      },+      {+        "number": "45",+        "name": "RstN",+        "type": "input",+        "description": "Active-low reset input signal to reset IP804AR."+      },+      {+        "number": "46",+        "name": "AD2",+        "type": "input",+        "description": "I2C device address selection bit 2 latched at power-on reset per section 5.3."+      },+      {+        "number": "47",+        "name": "AD1",+        "type": "input",+        "description": "I2C device address selection bit 1 latched at power-on reset per section 5.3."+      },+      {+        "number": "48",+        "name": "AD0",+        "type": "input",+        "description": "I2C device address selection bit 0 latched at power-on reset per section 5.3."+      },+      {+        "number": "49",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: PortN0-3 pins classified as bidirectional based on dual power sourcing and sensing capability typica",+          "exposed pad 49 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 59,+        "cost_usd": 0.6137,+        "at": "2026-09-22T05:31:20"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590919292626157568",+        "pages": 59,+        "sha256": "eddd34f0b55a6cd4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 49,+        "described": 49,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file