main
Ray
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
5982ecf
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302
{
"schema": "adom.pads/1",
"slug": "ip5306",
"footprint": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm",
"generated_from": {
"footprint": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm@sha256:5848244c5e72002e",
"pins": "page.json:component.pins",
"overrides": null
},
"pin1": {
"pad": "1",
"at": [
-2.475,
-1.905
],
"corner": "top-left",
"source": "silk-marker",
"derived_from": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm@sha256:5848244c5e72002e"
},
"pad_count": 9,
"symbol_pins": [
"1",
"2",
"3",
"4",
"5",
"6",
"7",
"8",
"9"
],
"paste_apertures": 4,
"issues": [],
"pads": [
{
"pad": "1",
"kind": "smd",
"shape": "roundrect",
"at": [
-2.475,
-1.905
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "1",
"name": "VIN",
"type": "power_in",
"description": "Charger 5V input pin. Recommended input voltage 4.75-5.5V (typ 5V). Input under-voltage lockout rising threshold ~4.5V with 200mV hysteresis. Provides adapter power to the internal synchronous buck charger.",
"is_pin1": true,
"source": {
"geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "2",
"kind": "smd",
"shape": "roundrect",
"at": [
-2.475,
-0.635
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "2",
"name": "LED1",
"type": "output",
"description": "Battery state-of-charge (SOC) LED indicator pin 1. Sinks/sources ~4 mA to drive an indicator LED. Multiplexed with the L1 line used in 1/2/3/4-LED configurations to display SOC and charging status.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "3",
"kind": "smd",
"shape": "roundrect",
"at": [
-2.475,
0.635
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "3",
"name": "LED2",
"type": "output",
"description": "Battery SOC LED indicator pin 2 (~4 mA drive). Together with LED1/LED3 it forms the 3-pin matrix that drives up to 4 SOC LEDs.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "4",
"kind": "smd",
"shape": "roundrect",
"at": [
-2.475,
1.905
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "4",
"name": "LED3",
"type": "output",
"description": "Battery SOC LED indicator pin 3 (~4 mA drive). Third line of the matrixed LED indicator; unused/tied to BAT in some LED-count configurations.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "5",
"kind": "smd",
"shape": "roundrect",
"at": [
2.475,
1.905
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "5",
"name": "KEY",
"type": "input",
"description": "ON/OFF push-button input, also multiplexed as torch/flashlight lighting driver. Short push (30 ms - 2 s) turns on SOC LEDs and enables the boost; long push (>2 s) turns everything off; double short-push toggles the flashlight LED.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "6",
"kind": "smd",
"shape": "roundrect",
"at": [
2.475,
0.635
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "6",
"name": "BAT",
"type": "power_in",
"description": "Battery voltage sense pin and battery connection for the switching charger/boost. Operating range 3.0-4.4V (typ 3.7V Li-ion). Target charge voltage 4.2V (4.20/4.30/4.35/4.40V options), recharge threshold 4.1V.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "7",
"kind": "smd",
"shape": "roundrect",
"at": [
2.475,
-0.635
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "7",
"name": "SW",
"type": "passive",
"description": "DC-DC switch node; connect the single power inductor (typ 1 uH) between SW and BAT. Carries the synchronous buck/boost switching waveform (500 kHz typical) and up to 2.1 A load current.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "8",
"kind": "smd",
"shape": "roundrect",
"at": [
2.475,
-1.905
],
"rot": 0.0,
"size": [
1.95,
0.6
],
"layers": [
"F.Cu",
"F.Mask",
"F.Paste"
],
"thermal": false,
"pin": "8",
"name": "VOUT",
"type": "power_out",
"description": "DC-DC 5V output pin (boost output, typ 5.10 V from VBAT=3.7V) delivering up to 2.1 A. Also serves as the USB Vbus output; supports output over-current and short-circuit protection.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
},
{
"pad": "9",
"kind": "smd",
"shape": "rect",
"at": [
0.0,
0.0
],
"rot": 0.0,
"size": [
2.41,
3.3
],
"layers": [],
"thermal": true,
"pin": "9",
"name": "PowerPAD",
"type": "power_in",
"description": "Exposed thermal pad on the underside of the eSOP-8 package. Must be connected to the ground plane; serves as the device ground return and primary thermal path for the integrated power FETs.",
"is_pin1": false,
"source": {
"geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
"meaning": "page.json:component.pins",
"correspondence": "kicad: symbol pin number == pad name"
}
}
]
}