main
Ray ip5189t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 425324c
{
  "schema_version": 1,
  "type": "component",
  "slug": "ip5189t",
  "title": "IP5189T",
  "brief": "INJOINIC Battery Management, QFN-24-EP(4x4). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "ip5189t"
  ],
  "component": {
    "mpn": "IP5189T",
    "manufacturer": "INJOINIC",
    "package": "QFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "PMIC",
    "subcategory": "Battery Management",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/1ea96e4f773093a3f89426e087f4115a.pdf",
    "parts": {
      "symbol": "ip5189t.kicad_sym",
      "footprint": "ip5189t.kicad_mod",
      "model_3d": "ip5189t-etched.glb",
      "model_3d_plain": "ip5189t.glb",
      "model_3d_step": "ip5189t-etched.step",
      "model_3d_step_plain": "ip5189t.step",
      "lbr": "ip5189t.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "L2",
        "type": "output",
        "description": "LED battery-level indicator driver pin L2 (2-20 mA sink/source, typ 10 mA)."
      },
      {
        "number": "2",
        "name": "L3",
        "type": "output",
        "description": "LED battery-level indicator driver pin L3 (2-20 mA sink/source, typ 10 mA)."
      },
      {
        "number": "3",
        "name": "VDD",
        "type": "power_out",
        "description": "Internal LDO output, 3.1V. Bypass to ground with a decoupling capacitor."
      },
      {
        "number": "4",
        "name": "VTHS",
        "type": "input",
        "description": "Battery chemistry / cell platform selection input (selects 4.2V / 4.35V / 4.4V CV target)."
      },
      {
        "number": "5",
        "name": "RSET",
        "type": "input",
        "description": "Battery internal-resistance compensation pin; sets fuel-gauge curve fine-trim via external resistor."
      },
      {
        "number": "6",
        "name": "NTC",
        "type": "input",
        "description": "Battery NTC thermistor sense input for temperature protection during charging."
      },
      {
        "number": "7",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference."
      },
      {
        "number": "8",
        "name": "KEY",
        "type": "input",
        "description": "Pushbutton input (active low to GND). Short press (>80ms, <2s) turns on boost/LED display; double short press within 1s turns off boost and lights; long press (>2s) toggles flashlight LED."
      },
      {
        "number": "9",
        "name": "VBAT",
        "type": "power_in",
        "description": "Boost input / Li-ion battery positive terminal (3.0-4.4V operating). Also acts as charger output to battery."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Leave floating or tie per PCB layout."
      },
      {
        "number": "11",
        "name": "ICHG",
        "type": "input",
        "description": "External resistor sets charge current per ICHG = 1.2V / R * 100000 (e.g. 120kΩ→1A, 56kΩ→2.1A, NC→default 1.8A)."
      },
      {
        "number": "12",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground return for the DC-DC switch stage."
      },
      {
        "number": "13",
        "name": "LX",
        "type": "passive",
        "description": "DCDC switch node. Pins 13, 14, 15 are tied together and connect to the 1µH boost/charge inductor."
      },
      {
        "number": "14",
        "name": "LX",
        "type": "passive",
        "description": "DCDC switch node (parallel with pins 13, 15)."
      },
      {
        "number": "15",
        "name": "LX",
        "type": "passive",
        "description": "DCDC switch node (parallel with pins 13, 14)."
      },
      {
        "number": "16",
        "name": "VOUT",
        "type": "power_out",
        "description": "5V boost output (5.0-5.15V @ 2.1A, up to 2.1A continuous). Pins 16, 17 tied together for USB Type-A output."
      },
      {
        "number": "17",
        "name": "VOUT",
        "type": "power_out",
        "description": "5V boost output (parallel with pin 16)."
      },
      {
        "number": "18",
        "name": "DP",
        "type": "bidirectional",
        "description": "USB Type-A output D+ line; used for DCP handshake / adapter recognition on the output port."
      },
      {
        "number": "19",
        "name": "DM",
        "type": "bidirectional",
        "description": "USB Type-A output D- line; used for DCP handshake / adapter recognition on the output port."
      },
      {
        "number": "20",
        "name": "VIN",
        "type": "power_in",
        "description": "5V USB charging input (4.65-5.5V, up to 2.2A). Pins 20, 21 tied together for Micro-B/Type-C VBUS input."
      },
      {
        "number": "21",
        "name": "VIN",
        "type": "power_in",
        "description": "5V USB charging input (parallel with pin 20)."
      },
      {
        "number": "22",
        "name": "LIGHT",
        "type": "output",
        "description": "Flashlight LED driver, open-drain output (typ 30 mA sink). Toggled by long-press on KEY."
      },
      {
        "number": "23",
        "name": "VSET",
        "type": "input",
        "description": "Battery-type / LED display count configuration input."
      },
      {
        "number": "24",
        "name": "L1",
        "type": "output",
        "description": "LED battery-level indicator driver pin L1 (2-20 mA sink/source, typ 10 mA)."
      },
      {
        "number": "25",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed thermal pad (EPAD). Power ground and heatsink; must be soldered to the PCB GND plane for thermal dissipation."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/1ea96e4f773093a3f89426e087f4115a.pdf",
        "pages": 15,
        "sha256": "a13a7ce16e0c1601",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ip5189t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ip5189t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "01bd080efe5c513700192dd99304b00fd751a8b34d3c336beaf43df1474e5416",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "INJOINIC",
      "Package": "QFN-24-EP(4x4)",
      "Category": "PMIC",
      "Pins": "25"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ip5189t"
  ],
  "discovery_pitch": "IP5189T (INJOINIC) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ip5189t.kicad_sym",
    "ip5189t.kicad_mod",
    "ip5189t.glb",
    "ip5189t.step",
    "ip5189t.lbr",
    "docs/hero.png",
    "docs/ip5189t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ip5189t-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "IP5189T",
      "kind": "packaging"
    },
    {
      "mpn": "IP5189T_YYY",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-24T22:46:35.004Z"
}