component
IP3012A
Public Made by Adomby adom
INJOINIC Battery Management, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 24d ago |
| viewers | 24d ago |
| ip3012a-etched.glb | 24d ago |
| ip3012a-etched.step | 24d ago |
| ip3012a-hero.glb | 24d ago |
| ip3012a-hero.overlay.json | 24d ago |
| ip3012a.glb | 24d ago |
| ip3012a.kicad_mod | 24d ago |
| ip3012a.kicad_sym | 24d ago |
| ip3012a.lbr | 24d ago |
| ip3012a.step | 24d ago |
| package.json | 24d ago |
| page.json | 24d ago |
| README.md | 24d ago |
IP3012A
INJOINIC · Battery Management · SOT-23-5L
IP3012A from INJOINIC, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | VS must be connected to GND or left floating, per the datasheet pin table. |
| 2 | GND | power_in | Ground, connected to the negative terminal of the battery and internally connected to the power MOSFET. |
| 3 | VDD | power_in | Power supply input, connected to the positive terminal of the battery; the IC's operating and shutdown currents are specified at VDD = 3.6 V and VDD = 2 V respectively. |
| 4 | VM | passive | Negative terminal of the charger or load, internally connected to the power MOSFET; the absolute VM input voltage range is -3 V to 6 V. |
| 5 | NC | unconnected | Recommended to be left floating, or may be connected to VM. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | INJOINIC |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD input voltage | VDD | -0.3 | 7 | V | 4 | ||
| VM input voltage | Vm | -3 | 6 | V | 4 | ||
| Junction temperature range | TJ | -40 | 150 | ℃ | 4 | ||
| Storage temperature range | Tstg | -60 | 150 | ℃ | 4 | ||
| Overcharge detection voltage accuracy | VCU | -0.05 | 0.05 | V | 5 | ||
| Overcharge recovery voltage accuracy | VCL | -0.1 | 0.1 | V | 5 | ||
| Overdischarge detection voltage accuracy | VDL | -0.1 | 0.1 | V | 5 | ||
| Discharge overcurrent threshold IIOV, lower and upper bound as printed (65% / 135% of IIOV) | IIOV | 65 | 135 | % of IIOV | 5 | ||
| Charge overcurrent threshold IIOC, lower and upper bound as printed (65% / 135% of IIOC) | IIOC | 65 | 135 | % of IIOC | 5 | ||
| Charge detection voltage | VCHA | -0.2 | -0.12 | V | 5 | ||
| Overcharge detection delay time | tCU | 240 | 320 | 400 | ms | 5 | |
| Overdischarge detection delay time | tDL | 40 | 80 | 120 | ms | 5 | |
| Short-circuit current | ISC | 5 | 8 | 10 | A | 5 | |
| Discharge overcurrent delay time | tIOV | 3 | 10 | 15 | ms | 5 | |
| Charge overcurrent delay time | tIOC | 3 | 10 | 15 | ms | 5 | |
| Short-circuit protection delay time | tSC | 50 | 200 | 600 | µs | 5 | |
| Normal operating current | IOPE | 2.6 | 5 | µA | VDD=3.6V，VM=0V | 5 | |
| Power-down current | IPDN | 1.1 | 1.4 | µA | VDD=2V，VM=VDD | 5 | |
| MOSFET on-resistance | Ron | 50 | 55 | mΩ | VDD=3.6V，IVM=1A | 5 | |
| VM pull-up resistance | RVMD | 320 | kΩ | 5 | |||
| VM pull-down resistance | RVMS | 30 | kΩ | 5 | |||
| Overcharge recovery voltage (IP3012A nominal) | VCL | 4.1 | V | 3.9-4.4V, step 50mV; 3.4-3.9V, step 100mV | 5 | ||
| Discharge overcurrent threshold (IP3012A nominal) | IIOV | 3 | A | 3 | |||
| Charge overcurrent threshold (IP3012A nominal) | IIOC | 3 | A | 3 | |||
| ESD rating, human body model | ESD | 2 | KV | Human body model (HBM) | 4 | ||
| Thermal resistance, junction to ambient | θJA | 50 | ℃/W | 4 |
CAD (KiCad official)
- Symbol:
IP3012A - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
ip3012a-etched.step/ip3012a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ip3012a.step/ip3012a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: INJOINIC datasheet (13 pp, sha256
0058f53f9708667e, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).