component
IP2364
Public Made by Adomby adom
INJOINIC Battery Management, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| ip2364-etched.glb | 17d ago |
| ip2364-etched.step | 17d ago |
| ip2364-hero.glb | 17d ago |
| ip2364-hero.overlay.json | 17d ago |
| ip2364.glb | 17d ago |
| ip2364.kicad_mod | 17d ago |
| ip2364.kicad_sym | 17d ago |
| ip2364.lbr | 17d ago |
| ip2364.step | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
IP2364
INJOINIC · Battery Management · ESOP-8
IP2364 from INJOINIC, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSYS | power_out | System voltage pin that requires a 22uF ceramic capacitor placed close to the IC pin and the EPAD; electrolytic capacitors are not allowed. |
| 2 | VIN | power_in | Input voltage pin with recommended operating range 14V to 24V (typical 20V) and absolute maximum range -0.3V to 28V. |
| 3 | VINSEN | input | Input voltage sense pin that sets the input undervoltage threshold via an external divider, reduces charge current when it falls to 1.5V, stops charging and enters standby below 1.3V, and can be used as an enable pin. |
| 4 | LED | output | Charge status indicator output that drives an LED with a stated output current of 5mA to 10mA. |
| 5 | NTC | input | NTC temperature protection pin that sources 20uA into an external NTC resistor to GND; if NTC is unused it must be tied to GND through 51kΩ and must not be left floating. |
| 6 | FB | input | Output voltage feedback pin whose constant-voltage target is 2.1V typical (2.05V to 2.15V), and external divider resistors RFB1/RFB2 should be 0.1% precision. |
| 7 | BST | passive | Bootstrap pin that requires a bootstrap capacitor placed close to the BST and LX pins to provide gate-drive voltage for the high-side switch, with VBST limited to VLX + 7V. |
| 8 | LX | output | DC-DC switching node that connects to the inductor, with voltage range -0.3V to VIN + 0.3V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | INJOINIC |
| Package | ESOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (absolute maximum) | VIN、VSYS | -0.3 | 28 | V | 5 | ||
| LX voltage range (absolute maximum) | VLX | -0.3 | V | 5 | |||
| LED/NTC voltage (absolute maximum) | V LED/NTC | -0.3 | 6 | V | 5 | ||
| Junction temperature range | TJ | -40 | 150 | ℃ | 5 | ||
| Storage temperature range | Tstg | -60 | 150 | ℃ | 5 | ||
| ESD, human body model (HBM) | ESD | 4 | kV | HBM | 5 | ||
| Input voltage (recommended operating) | VIN | 14 | 20 | 24 | V | 5 | |
| Input voltage | VIN | 14 | 20 | 24 | V | 5 | |
| Input overvoltage threshold, rising voltage | VIN-OV | 26 | 27 | 28 | V | 5 | |
| Input overvoltage threshold, falling voltage | VIN-OV | 24 | 25 | 26 | V | 5 | |
| Input quiescent current | IQ | 10 | 20 | mA | VIN=20V，IBAT=0A | 5 | |
| Standby current | IBAT_standby | 20 | 30 | uA | VIN=0V，VBAT=12.6V | 5 | |
| Standby current (charge full, stop charging) | IBAT_standby | 40 | 60 | uA | VIN=20V，VBAT=12.6V，充满停充 | 5 | |
| Standby current (VINSEN low) | IBAT_standby | 20 | 30 | uA | VIN=20V，VBAT=12.6V，VINSEN=0V | 5 | |
| Charge target voltage (FB pin in CV charging) | VTRGT | 2.05 | 2.1 | 2.15 | V | CV 充电时 FB 引脚电压 | 5 |
| Charge current (standard part) | ICHRG | 1.5 | A | 标准品，VIN=20V，VBAT=10.8V | 6 | ||
| Trickle-charge cutoff voltage (FB pin) | VTRKL | 1.45 | 1.5 | 1.55 | V | 检测 FB 引脚电压 | 6 |
| Trickle charge current | ITRKL | 40 | 70 | 100 | mA | 6 | |
| Recharge threshold voltage (FB pin) | VRCH | 2.05 | V | 检测 FB 引脚电压 | 6 | ||
| Input undervoltage lockout threshold (VINSEN) | VUVLO | 1.3 | V | 检测 VINSEN 电压 | 6 | ||
| High-side MOSFET on-resistance | RDS(ON) | 60 | 70 | mΩ | 上管 | 6 | |
| Low-side MOSFET on-resistance | RDS(ON) | 50 | 60 | mΩ | 下管 | 6 | |
| LED output current | ILED | 5 | 10 | mA | 6 | ||
| Switching frequency | FS | 400 | 450 | 500 | KHz | VIN=20V, IBAT=1.5A | 6 |
| Thermal shutdown temperature (rising) | TOTP | 120 | 140 | 160 | ℃ | 上升温度 | 6 |
| Thermal shutdown hysteresis | ΔTOTP | 30 | 40 | 50 | ℃ | 6 | |
| Junction-to-ambient thermal resistance | θJA | 60 | ℃/W | 5 |
CAD (KiCad official)
- Symbol:
IP2364 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
ip2364-etched.step/ip2364-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ip2364.step/ip2364.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: INJOINIC datasheet (16 pp, sha256
ca004909e7aef9f5, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).