main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ip2332: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ip2332: viewers · Ray
ip2332-etched.fit.json ip2332: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ip2332-etched.glb ip2332: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ip2332-etched.step ip2332: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ip2332.glb Publish 0.1.0 · Ray
ip2332.kicad_mod Publish 0.1.0 · Ray
ip2332.kicad_sym Publish 0.1.0 · Ray
ip2332.lbr Publish 0.1.0 · Ray
ip2332.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json ip2332: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md ip2332: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

IP2332

INJOINIC · Battery Management · ESOP-8

IP2332 from INJOINIC, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NTC input Battery temperature sense input. Connect an external negative temperature coefficient (NTC) thermistor from this pin to GND to monitor battery temperature; supports a 5-segment JEITA-compatible charge profile.
2 ISET input Charge current programming pin. Connect a resistor R_ISET from this pin to GND to set constant-current charge level (e.g. 1.4kΩ→2.4A, 2.4kΩ→1.5A, 4.3kΩ→1A; leave NC or ≥120kΩ for ~2A default).
3 LED2 output LED2 status indicator output (general-purpose IO drive). Drives a status LED; drive current up to 5mA.
4 LED1 output LED1 status indicator output with built-in constant-current drive and breathing-light mode (no external current-limit resistor required). Drive current up to 5mA.
5 BAT power_out Battery connection. Connect to the positive terminal of the single-cell Li-ion battery being charged. Regulated float voltage 4.2V standard (custom 3.5V-4.4V for LiFePO4/other chemistries).
6 LX output DC-DC switching node. Connect the external buck inductor (2.2µH typ) between this pin and the BAT-side output capacitor. Switching frequency 500kHz.
7 GND power_in Ground reference. Tie to system ground; connect together with the exposed thermal pad.
8 VIN power_in 5V DC input supply. Recommended operating range 4.5V-6V; UVLO ~4.3V, OVP ~6V (200mV hysteresis). Bypass with a ceramic capacitor to GND.
9 GND power_in Exposed thermal pad (EPAD) on package underside. Must be soldered to the PCB ground plane for both electrical ground and heat dissipation.

Key specifications

Parameter Value
Manufacturer INJOINIC
Package ESOP-8
Category PMIC
Pins 9

CAD (KiCad official)

  • Symbol: IP2332
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: ip2332-etched.step / ip2332-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ip2332.step / ip2332.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ip2332.step 125 KB You want the bare part, or you mark your own boards.
ip2332-etched.step 1.7 MB You want the part with IP2332 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 411 faces against 152 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: INJOINIC datasheet (18 pp, sha256 fc378518a3665f60, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF