← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# IP2332++**INJOINIC** · Battery Management · ESOP-8++IP2332 from INJOINIC, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NTC | input | Battery temperature sense input. Connect an external negative temperature coefficient (NTC) thermistor from this pin to GND to monitor battery temperature; supports a 5-segment JEITA-compatible charge profile. |+| 2 | ISET | input | Charge current programming pin. Connect a resistor R_ISET from this pin to GND to set constant-current charge level (e.g. 1.4kΩ→2.4A, 2.4kΩ→1.5A, 4.3kΩ→1A; leave NC or ≥120kΩ for ~2A default). |+| 3 | LED2 | output | LED2 status indicator output (general-purpose IO drive). Drives a status LED; drive current up to 5mA. |+| 4 | LED1 | output | LED1 status indicator output with built-in constant-current drive and breathing-light mode (no external current-limit resistor required). Drive current up to 5mA. |+| 5 | BAT | power_out | Battery connection. Connect to the positive terminal of the single-cell Li-ion battery being charged. Regulated float voltage 4.2V standard (custom 3.5V-4.4V for LiFePO4/other chemistries). |+| 6 | LX | output | DC-DC switching node. Connect the external buck inductor (2.2µH typ) between this pin and the BAT-side output capacitor. Switching frequency 500kHz. |+| 7 | GND | power_in | Ground reference. Tie to system ground; connect together with the exposed thermal pad. |+| 8 | VIN | power_in | 5V DC input supply. Recommended operating range 4.5V-6V; UVLO ~4.3V, OVP ~6V (200mV hysteresis). Bypass with a ceramic capacitor to GND. |+| 9 | GND | power_in | Exposed thermal pad (EPAD) on package underside. Must be soldered to the PCB ground plane for both electrical ground and heat dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | INJOINIC |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `IP2332`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [INJOINIC datasheet](docs/ip2332-datasheet.pdf) (18 pp, sha256 `fc378518a3665f60`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ip2332-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "ip2332",+ "version": "0.1.0",+ "type": "component",+ "description": "INJOINIC Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "ip2332"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ip2332.kicad_sym",+ "ip2332.kicad_mod",+ "ip2332.glb",+ "ip2332.step",+ "ip2332.lbr",+ "docs/hero.png",+ "docs/ip2332-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}