main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ip2325-da: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ip2325-da: viewers · Ray
ip2325-da-etched.fit.json ip2325-da: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ip2325-da-etched.glb ip2325-da: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ip2325-da-etched.step ip2325-da: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ip2325-da.glb Publish 0.1.0 · Ray
ip2325-da.kicad_mod Publish 0.1.0 · Ray
ip2325-da.kicad_sym Publish 0.1.0 · Ray
ip2325-da.lbr Publish 0.1.0 · Ray
ip2325-da.step Publish 0.1.0 · Ray
package.json ip2325-da: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ip2325-da: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/ip2325-da · Ray

IP2325_DA

INJOINIC · Battery Management · ESOP-8

IP2325_DA from INJOINIC, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSYS power_out Boost converter intermediate output node; place two 22μF ceramic capacitors in close proximity to the pin.
2 VOUT power_out Boost converter output connected to battery positive terminal; target voltage adjustable from 8.1V to 8.4V via external resistor RVSET.
3 VSET input Constant voltage charging voltage setting pin; external resistor RVSET selects target voltage from 8.1V (1K) to 8.4V (open circuit).
4 NTC input NTC temperature protection pin outputting 20μA constant current; voltage 0.43V-0.56V reduces charge current by half, below 0.43V stops charging, above 1.32V stops charging, normal operation 0.56V-1.32V.
5 LED output LED indicator output with maximum 5mA drive current; indicates charging status with flashing during charge and constant on when fully charged for IP2325_DA variant.
6 VIN power_in Input power supply and detection pin; operates from 4.5V to 5.5V nominal with integrated input regulation loop maintaining voltage near 4.5V minimum threshold.
7 BST power_out Bootstrap circuit supply pin for gate driver; place 0.1μF capacitor between BST and LX pins in close proximity to power high-side MOSFET switch.
8 LX output DCDC switch node connected to 2.2μH external inductor; operates at 500kHz switching frequency with integrated synchronous power MOSFET switches.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer INJOINIC
Package ESOP-8
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: IP2325_DA
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: ip2325-da-etched.step / ip2325-da-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ip2325-da.step / ip2325-da.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: INJOINIC datasheet (13 pp, sha256 8fdcfc9574b8e7b0, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF