component
IP101GA
Public Made by Adomby adom
IC Plus Ethernet Transceivers, LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+84@@ -0,0 +1,84 @@+# IP101GA++**IC Plus** · Ethernet Transceivers · LQFP-48(7x7)++IP101GA from IC Plus, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COL/RMII | output | Collision detection output (active high) or RMII mode selection latched during power-on reset (0=MII, 1=RMII mode). |+| 2 | TXEN | input | Transmit enable input, active high to enable transmission; synchronous with TXCLK. |+| 3 | TXD3 | input | Transmit data bit 3, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz). |+| 4 | TXD2 | input | Transmit data bit 2, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz). |+| 5 | TXD1 | input | Transmit data bit 1, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz). |+| 6 | TXD0 | input | Transmit data bit 0, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz). |+| 7 | TXCLK/50M_CLKI | bidirectional | Transmit clock output (25MHz at 100Base-TX, 2.5MHz at 10Base-T) in MII mode; 50MHz clock input required in RMII mode. |+| 8 | REGOUT | power_in | 1.0V regulated output for internal use; requires 10µF and 0.1µF decoupling capacitors for noise filtering. |+| 9 | LED0/PHY_AD0 | output | LED0 output or PHY address bit 0 latched during power-on reset; high impedance reset state. |+| 10 | LED1/PHY_AD1 | output | LED1 output or PHY address bit 1 latched during power-on reset; high impedance reset state. |+| 11 | DGND | power_in | Ground connection for digital circuits. |+| 12 | LED2/PHY_AD2 | output | LED2 output or PHY address bit 2 latched during power-on reset; high impedance reset state. |+| 13 | LED3/PHY_AD3 | output | LED3 output or PHY address bit 3 latched during power-on reset; internal pull-down, high impedance reset state. |+| 14 | VDDIO | power_in | 3.3V or 2.5V digital I/O power supply for LED, RESET_N and MII/RMII interface signals. |+| 15 | NC | unconnected | No connection. |+| 16 | RXCLK/50M_CLKO | output | Receive clock output (25MHz at 100Base-TX, 2.5MHz at 10Base-T) in MII mode; 50MHz clock output in RMII mode. |+| 17 | DGND | power_in | Ground connection for digital circuits. |+| 18 | RXD3 | output | Receive data bit 3 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII). |+| 19 | RXD2 | output | Receive data bit 2 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII). |+| 20 | RXD1 | output | Receive data bit 1 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII). |+| 21 | RXD0 | output | Receive data bit 0 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII). |+| 22 | RXDV/CRS_DV/FX_HEN | output | Receive data valid (MII), carrier sense and receive data valid (RMII), or fiber mode select latched during reset (0=TP, 1=fiber); internal pull-down. |+| 23 | CRS/LEDMOD | output | Carrier sense output or LED mode selection latched during reset (0=LED mode 1, 1=LED mode 2); internal pull-down. |+| 24 | RXER | output | Receive error output (high impedance reset state); asserted when decoding error detected or PHY receiving LPI signal. |+| 25 | MDC | input | Management data clock input for serial management interface; maximum clock frequency 2.5MHz. |+| 26 | MDIO | bidirectional | Management data input/output for serial management interface; integrated 250kΩ pull-up resistor. |+| 27 | TEST_ON | input | Test mode enable input with internal pull-down; set high to enable test mode; leave floating for normal operation. |+| 28 | ISET | input | Bandgap circuit current set input; connect to GND via 6.19kΩ ±1% resistor to define internal reference current. |+| 29 | AGND1V | power_in | 1.0V analog circuit ground connection. |+| 30 | MDI_RN | bidirectional | Receive differential pair negative input/output, high impedance reset state; shared by 100Base-TX and 10Base-T modes. |+| 31 | MDI_RP | bidirectional | Receive differential pair positive input/output, high impedance reset state; shared by 100Base-TX and 10Base-T modes. |+| 32 | NC | unconnected | No connection. |+| 33 | MDI_TN | bidirectional | Transmit differential pair negative, high impedance reset state; Manchester code (10Base-T) or MLT-3 (100Base-TX) output. |+| 34 | MDI_TP | bidirectional | Transmit differential pair positive, high impedance reset state; Manchester code (10Base-T) or MLT-3 (100Base-TX) output. |+| 35 | AGND33 | power_in | 3.3V analog circuit ground connection. |+| 36 | AVDD33 | power_in | 3.3V analog power supply for analog circuitry; requires careful decoupling and placed close to chip. |+| 37 | NC | unconnected | No connection. |+| 38 | NC | unconnected | No connection. |+| 39 | NC | unconnected | No connection. |+| 40 | NC | unconnected | No connection. |+| 41 | NC | unconnected | No connection. |+| 42 | RESET_N | input | Active-low reset input with internal pull-up; 25MHz clock must be active 10 cycles before rising edge; device operational 2.5ms after reset release. |+| 43 | TXER/FXSD | input | Transmit error input (TP mode) with internal pull-down; fiber signal detect (fiber mode, 0=down, 1=up); must float or connect to GND in RMII mode. |+| 44 | NC | unconnected | No connection. |+| 45 | DGND | power_in | Ground connection for digital circuits. |+| 46 | X1 | input | 25MHz crystal oscillator input or external 25MHz clock input; connect to GND if using external 50MHz clock on TXCLK/50M_CLKI. |+| 47 | X2 | output | 25MHz crystal oscillator output; leave open when using external oscillator on X1. |+| 48 | INTR | tri_state | Open-drain programmable interrupt output for link status, speed, duplex changes or RX error countdown; requires external pull-up resistor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | IC Plus |+| Package | LQFP-48(7x7) |+| Category | Interface |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `IP101GA`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `ip101ga-etched.step` / `ip101ga-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ip101ga.step` / `ip101ga.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [IC Plus datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884323458027520) (65 pp, sha256 `2398538332fea519`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ip101ga-datasheet.pdf)
page.jsonadded+383@@ -0,0 +1,383 @@+{+ "slug": "ip101ga",+ "version": "0.1.0",+ "type": "component",+ "description": "IC Plus Ethernet Transceivers, LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "ip101ga",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ip101ga.kicad_sym",+ "ip101ga.kicad_mod",+ "ip101ga.glb",+ "ip101ga.step",+ "ip101ga.lbr",+ "docs/hero.png",+ "docs/ip101ga-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "IP101GA",+ "manufacturer": "IC Plus",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Interface",+ "subcategory": "Ethernet Transceivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884323458027520",+ "parts": {+ "symbol": "ip101ga.kicad_sym",+ "footprint": "ip101ga.kicad_mod",+ "model_3d": "ip101ga-etched.glb",+ "model_3d_plain": "ip101ga.glb",+ "model_3d_step": "ip101ga-etched.step",+ "model_3d_step_plain": "ip101ga.step",+ "lbr": "ip101ga.lbr"+ },+ "distributor_links": {+ "lcsc": "C336124"+ },+ "pins": [+ {+ "number": "1",+ "name": "COL/RMII",+ "type": "output",+ "description": "Collision detection output (active high) or RMII mode selection latched during power-on reset (0=MII, 1=RMII mode)."+ },+ {+ "number": "2",+ "name": "TXEN",+ "type": "input",+ "description": "Transmit enable input, active high to enable transmission; synchronous with TXCLK."+ },+ {+ "number": "3",+ "name": "TXD3",+ "type": "input",+ "description": "Transmit data bit 3, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz)."+ },+ {+ "number": "4",+ "name": "TXD2",+ "type": "input",+ "description": "Transmit data bit 2, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz)."+ },+ {+ "number": "5",+ "name": "TXD1",+ "type": "input",+ "description": "Transmit data bit 1, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz)."+ },+ {+ "number": "6",+ "name": "TXD0",+ "type": "input",+ "description": "Transmit data bit 0, synchronous to TXCLK (MII 25MHz) or 50M_CLKI (RMII 50MHz)."+ },+ {+ "number": "7",+ "name": "TXCLK/50M_CLKI",+ "type": "bidirectional",+ "description": "Transmit clock output (25MHz at 100Base-TX, 2.5MHz at 10Base-T) in MII mode; 50MHz clock input required in RMII mode."+ },+ {+ "number": "8",+ "name": "REGOUT",+ "type": "power_in",+ "description": "1.0V regulated output for internal use; requires 10µF and 0.1µF decoupling capacitors for noise filtering."+ },+ {+ "number": "9",+ "name": "LED0/PHY_AD0",+ "type": "output",+ "description": "LED0 output or PHY address bit 0 latched during power-on reset; high impedance reset state."+ },+ {+ "number": "10",+ "name": "LED1/PHY_AD1",+ "type": "output",+ "description": "LED1 output or PHY address bit 1 latched during power-on reset; high impedance reset state."+ },+ {+ "number": "11",+ "name": "DGND",+ "type": "power_in",+ "description": "Ground connection for digital circuits."+ },+ {+ "number": "12",+ "name": "LED2/PHY_AD2",+ "type": "output",+ "description": "LED2 output or PHY address bit 2 latched during power-on reset; high impedance reset state."+ },+ {+ "number": "13",+ "name": "LED3/PHY_AD3",+ "type": "output",+ "description": "LED3 output or PHY address bit 3 latched during power-on reset; internal pull-down, high impedance reset state."+ },+ {+ "number": "14",+ "name": "VDDIO",+ "type": "power_in",+ "description": "3.3V or 2.5V digital I/O power supply for LED, RESET_N and MII/RMII interface signals."+ },+ {+ "number": "15",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "16",+ "name": "RXCLK/50M_CLKO",+ "type": "output",+ "description": "Receive clock output (25MHz at 100Base-TX, 2.5MHz at 10Base-T) in MII mode; 50MHz clock output in RMII mode."+ },+ {+ "number": "17",+ "name": "DGND",+ "type": "power_in",+ "description": "Ground connection for digital circuits."+ },+ {+ "number": "18",+ "name": "RXD3",+ "type": "output",+ "description": "Receive data bit 3 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII)."+ },+ {+ "number": "19",+ "name": "RXD2",+ "type": "output",+ "description": "Receive data bit 2 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII)."+ },+ {+ "number": "20",+ "name": "RXD1",+ "type": "output",+ "description": "Receive data bit 1 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII)."+ },+ {+ "number": "21",+ "name": "RXD0",+ "type": "output",+ "description": "Receive data bit 0 output, high impedance reset state; synchronous to RXCLK (MII) or 50M_CLKO (RMII)."+ },+ {+ "number": "22",+ "name": "RXDV/CRS_DV/FX_HEN",+ "type": "output",+ "description": "Receive data valid (MII), carrier sense and receive data valid (RMII), or fiber mode select latched during reset (0=TP, 1=fiber); internal pull-down."+ },+ {+ "number": "23",+ "name": "CRS/LEDMOD",+ "type": "output",+ "description": "Carrier sense output or LED mode selection latched during reset (0=LED mode 1, 1=LED mode 2); internal pull-down."+ },+ {+ "number": "24",+ "name": "RXER",+ "type": "output",+ "description": "Receive error output (high impedance reset state); asserted when decoding error detected or PHY receiving LPI signal."+ },+ {+ "number": "25",+ "name": "MDC",+ "type": "input",+ "description": "Management data clock input for serial management interface; maximum clock frequency 2.5MHz."+ },+ {+ "number": "26",+ "name": "MDIO",+ "type": "bidirectional",+ "description": "Management data input/output for serial management interface; integrated 250kΩ pull-up resistor."+ },+ {+ "number": "27",+ "name": "TEST_ON",+ "type": "input",+ "description": "Test mode enable input with internal pull-down; set high to enable test mode; leave floating for normal operation."+ },+ {+ "number": "28",+ "name": "ISET",+ "type": "input",+ "description": "Bandgap circuit current set input; connect to GND via 6.19kΩ ±1% resistor to define internal reference current."+ },+ {+ "number": "29",+ "name": "AGND1V",+ "type": "power_in",+ "description": "1.0V analog circuit ground connection."+ },+ {+ "number": "30",+ "name": "MDI_RN",+ "type": "bidirectional",+ "description": "Receive differential pair negative input/output, high impedance reset state; shared by 100Base-TX and 10Base-T modes."+ },+ {+ "number": "31",+ "name": "MDI_RP",+ "type": "bidirectional",+ "description": "Receive differential pair positive input/output, high impedance reset state; shared by 100Base-TX and 10Base-T modes."+ },+ {+ "number": "32",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "33",+ "name": "MDI_TN",+ "type": "bidirectional",+ "description": "Transmit differential pair negative, high impedance reset state; Manchester code (10Base-T) or MLT-3 (100Base-TX) output."+ },+ {+ "number": "34",+ "name": "MDI_TP",+ "type": "bidirectional",+ "description": "Transmit differential pair positive, high impedance reset state; Manchester code (10Base-T) or MLT-3 (100Base-TX) output."+ },+ {+ "number": "35",+ "name": "AGND33",+ "type": "power_in",+ "description": "3.3V analog circuit ground connection."+ },+ {+ "number": "36",+ "name": "AVDD33",+ "type": "power_in",+ "description": "3.3V analog power supply for analog circuitry; requires careful decoupling and placed close to chip."+ },+ {+ "number": "37",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "38",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "39",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "40",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "41",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "42",+ "name": "RESET_N",+ "type": "input",+ "description": "Active-low reset input with internal pull-up; 25MHz clock must be active 10 cycles before rising edge; device operational 2.5ms after reset release."+ },+ {+ "number": "43",+ "name": "TXER/FXSD",+ "type": "input",+ "description": "Transmit error input (TP mode) with internal pull-down; fiber signal detect (fiber mode, 0=down, 1=up); must float or connect to GND in RMII mode."+ },+ {+ "number": "44",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "45",+ "name": "DGND",+ "type": "power_in",+ "description": "Ground connection for digital circuits."+ },+ {+ "number": "46",+ "name": "X1",+ "type": "input",+ "description": "25MHz crystal oscillator input or external 25MHz clock input; connect to GND if using external 50MHz clock on TXCLK/50M_CLKI."+ },+ {+ "number": "47",+ "name": "X2",+ "type": "output",+ "description": "25MHz crystal oscillator output; leave open when using external oscillator on X1."+ },+ {+ "number": "48",+ "name": "INTR",+ "type": "tri_state",+ "description": "Open-drain programmable interrupt output for link status, speed, duplex changes or RX error countdown; requires external pull-up resistor."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pins 15, 37-41, and 44 marked as NC are inferred from package layout and process of elimination as t; Pins with latched-in functions during reset (pins 1, 9, 10, 12, 13, 22, 23) are dual-function pins t; Pin 43 (TXER/FXSD) has mode-dependent function (TP vs fiber) and requires special handling in RMII m"+ ],+ "pages_sent": 65,+ "cost_usd": 0.9663,+ "at": "2026-09-22T12:51:03"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884323458027520",+ "pages": 65,+ "sha256": "2398538332fea519",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}