main
Ray
ina849dgkr: specified limits as data (metadata.characteristics, 39 rows from the datasheet)
5c7635f
INA849DGKR
Texas Instruments · Instrumentation Amplifiers · MSOP-8
INA849DGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) input. |
| 2 | RG | passive | Gain setting pin; place gain resistor between pin 2 and pin 3. |
| 3 | RG | passive | Gain setting pin; place gain resistor between pin 2 and pin 3. |
| 4 | +IN | input | Positive (noninverting) input. |
| 5 | -VS | power_in | Negative supply voltage. |
| 6 | REF | input | Reference input; must be driven by low-impedance source. |
| 7 | OUT | output | Output. |
| 8 | +VS | power_in | Positive supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Single supply voltage | VS | 40 | V | Single supply, VS = (+VS) | 4 | ||
| Dual supply voltage | VS | 20 | V | Dual supply, VS = (+VS) – (–VS) | 4 | ||
| Signal input pins current | VI | -10 | 10 | mA | Current | 4 | |
| Signal differential input voltage | -1 | 1 | V | Gain > 50 | 4 | ||
| Operating temperature | TA | -40 | 125 | °C | Operating temperature | 4 | |
| Junction temperature | TJ | -40 | 175 | °C | Junction temperature | 4 | |
| Storage temperature | Tstg | -65 | 150 | °C | Storage temperature | 4 | |
| Single supply voltage (recommended) | VS | 8 | 36 | V | Single supply, VS = (+VS) | 4 | |
| Dual supply voltage (recommended) | VS | 4 | 18 | V | Dual supply, VS = (+VS) – (–VS) | 4 | |
| Specified temperature | TA | -40 | 125 | °C | Specified temperature | 4 | |
| Input stage offset voltage | VOSI | 10 | 35 | µV | 5 | ||
| Input stage offset voltage | VOSI | 75 | µV | TA = –40°C to +125°C | 5 | ||
| Input stage offset voltage drift | 0.1 | 0.4 | µV/°C | TA = –40°C to +125°C | 5 | ||
| Output stage offset voltage | VOSO | 50 | 500 | µV | 5 | ||
| Output stage offset voltage | VOSO | 2000 | µV | TA = –40°C to +125°C | 5 | ||
| Power-supply rejection ratio | PSRR | 106 | 120 | dB | G = 1, RTI | 5 | |
| Power-supply rejection ratio | PSRR | 114 | 120 | dB | G = 10, RTI | 5 | |
| Power-supply rejection ratio | PSRR | 121 | 126 | dB | G = 100, RTI | 5 | |
| Power-supply rejection ratio | PSRR | 123 | 128 | dB | G = 1000, RTI | 5 | |
| Common-mode rejection ratio | CMRR | 92 | 110 | dB | At dc to 60 Hz, RTI, VCM = (V–) + 2.5 V to (V+) – 2.5 V, G = 1 | 5 | |
| Common-mode rejection ratio | CMRR | 112 | 125 | dB | At dc to 60 Hz, RTI, VCM = (V–) + 2.5 V to (V+) – 2.5 V, G = 10 | 5 | |
| Common-mode rejection ratio | CMRR | 120 | 127 | dB | At dc to 60 Hz, RTI, VCM = (V–) + 2.5 V to (V+) – 2.5 V, G = 100 | 5 | |
| Input bias current | IB | 20 | nA | VCM = VS / 2 | 5 | ||
| Input bias current drift | 10 | 80 | pA/°C | TA = –40°C to +125°C | 5 | ||
| Gain range | 1 | 10000 | V/V | 6 | |||
| Gain error | GE | -0.025 | 0.005 | 0.025 | % | G = 1, VO = ±10 V | 6 |
| Gain error | GE | -0.1 | 0.025 | 0.1 | % | G = 10, VO = ±10 V | 6 |
| Gain error | GE | -0.05 | 0.05 | % | G = 1000, VO = ±10 V | 6 | |
| Gain error drift | -5 | 5 | ppm/°C | G = 1, TA = –40°C to +125°C | 6 | ||
| Gain error drift | -35 | 35 | ppm/°C | G > 1, TA = –40°C to +125°C | 6 | ||
| Short-circuit current | ISC | -34 | 34 | mA | Continuous to VS / 2 | 6 | |
| Reference gain error | 0.01 | 0.05 | % | VO = ±10 V, inside the voltage swing range | 7 | ||
| Quiescent current | IQ | 6.2 | 6.6 | mA | VIN = 0 V | 7 | |
| Quiescent current | IQ | 8.9 | mA | TA = –40°C to +125°C | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 168.7 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 61.4 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 90 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 8.4 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 88.4 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
INA849DGKR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ina849dgkr-etched.step/ina849dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina849dgkr.step/ina849dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
62752729f516c9f4, retrieved 2026-09-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA849DGKR
**Texas Instruments** · Instrumentation Amplifiers · MSOP-8
INA849DGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) input. |
| 2 | RG | passive | Gain setting pin; place gain resistor between pin 2 and pin 3. |
| 3 | RG | passive | Gain setting pin; place gain resistor between pin 2 and pin 3. |
| 4 | +IN | input | Positive (noninverting) input. |
| 5 | -VS | power_in | Negative supply voltage. |
| 6 | REF | input | Reference input; must be driven by low-impedance source. |
| 7 | OUT | output | Output. |
| 8 | +VS | power_in | Positive supply voltage. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Single supply voltage | VS | | | 40 | V | Single supply, VS = (+VS) | 4 |
| Dual supply voltage | VS | | | 20 | V | Dual supply, VS = (+VS) – (–VS) | 4 |
| Signal input pins current | VI | -10 | | 10 | mA | Current | 4 |
| Signal differential input voltage | | -1 | | 1 | V | Gain > 50 | 4 |
| Operating temperature | TA | -40 | | 125 | °C | Operating temperature | 4 |
| Junction temperature | TJ | -40 | | 175 | °C | Junction temperature | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | Storage temperature | 4 |
| Single supply voltage (recommended) | VS | 8 | | 36 | V | Single supply, VS = (+VS) | 4 |
| Dual supply voltage (recommended) | VS | 4 | | 18 | V | Dual supply, VS = (+VS) – (–VS) | 4 |
| Specified temperature | TA | -40 | | 125 | °C | Specified temperature | 4 |
| Input stage offset voltage | VOSI | | 10 | 35 | µV | | 5 |
| Input stage offset voltage | VOSI | | | 75 | µV | TA = –40°C to +125°C | 5 |
| Input stage offset voltage drift | | | 0.1 | 0.4 | µV/°C | TA = –40°C to +125°C | 5 |
| Output stage offset voltage | VOSO | | 50 | 500 | µV | | 5 |
| Output stage offset voltage | VOSO | | | 2000 | µV | TA = –40°C to +125°C | 5 |
| Power-supply rejection ratio | PSRR | 106 | 120 | | dB | G = 1, RTI | 5 |
| Power-supply rejection ratio | PSRR | 114 | 120 | | dB | G = 10, RTI | 5 |
| Power-supply rejection ratio | PSRR | 121 | 126 | | dB | G = 100, RTI | 5 |
| Power-supply rejection ratio | PSRR | 123 | 128 | | dB | G = 1000, RTI | 5 |
| Common-mode rejection ratio | CMRR | 92 | 110 | | dB | At dc to 60 Hz, RTI, VCM = (V–) + 2.5 V to (V+) – 2.5 V, G = 1 | 5 |
| Common-mode rejection ratio | CMRR | 112 | 125 | | dB | At dc to 60 Hz, RTI, VCM = (V–) + 2.5 V to (V+) – 2.5 V, G = 10 | 5 |
| Common-mode rejection ratio | CMRR | 120 | 127 | | dB | At dc to 60 Hz, RTI, VCM = (V–) + 2.5 V to (V+) – 2.5 V, G = 100 | 5 |
| Input bias current | IB | | | 20 | nA | VCM = VS / 2 | 5 |
| Input bias current drift | | | 10 | 80 | pA/°C | TA = –40°C to +125°C | 5 |
| Gain range | | 1 | | 10000 | V/V | | 6 |
| Gain error | GE | -0.025 | 0.005 | 0.025 | % | G = 1, VO = ±10 V | 6 |
| Gain error | GE | -0.1 | 0.025 | 0.1 | % | G = 10, VO = ±10 V | 6 |
| Gain error | GE | -0.05 | | 0.05 | % | G = 1000, VO = ±10 V | 6 |
| Gain error drift | | -5 | | 5 | ppm/°C | G = 1, TA = –40°C to +125°C | 6 |
| Gain error drift | | -35 | | 35 | ppm/°C | G > 1, TA = –40°C to +125°C | 6 |
| Short-circuit current | ISC | -34 | | 34 | mA | Continuous to VS / 2 | 6 |
| Reference gain error | | | 0.01 | 0.05 | % | VO = ±10 V, inside the voltage swing range | 7 |
| Quiescent current | IQ | | 6.2 | 6.6 | mA | VIN = 0 V | 7 |
| Quiescent current | IQ | | | 8.9 | mA | TA = –40°C to +125°C | 7 |
| Junction-to-ambient thermal resistance | RθJA | | 168.7 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 61.4 | | °C/W | | 5 |
| Junction-to-board thermal resistance | RθJB | | 90 | | °C/W | | 5 |
| Junction-to-top characterization parameter | ψJT | | 8.4 | | °C/W | | 5 |
| Junction-to-board characterization parameter | ψJB | | 88.4 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `INA849DGKR`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `ina849dgkr-etched.step` / `ina849dgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina849dgkr.step` / `ina849dgkr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina849.pdf) (38 pp, sha256 `62752729f516c9f4`, retrieved 2026-09-22, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina849dgkr-datasheet.pdf)