main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina828idr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina828idr: viewers · Ray
ina828idr-etched.fit.json ina828idr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina828idr-etched.glb ina828idr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
ina828idr-etched.step ina828idr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
ina828idr.glb Publish 0.1.0 · Ray
ina828idr.kicad_mod Publish 0.1.0 · Ray
ina828idr.kicad_sym Publish 0.1.0 · Ray
ina828idr.lbr Publish 0.1.0 · Ray
ina828idr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json ina828idr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
README.md ina828idr: specified limits as data (metadata.characteristics, 41 rows from the datasheet) · Ray

INA828IDR

Texas Instruments · Operational Amplifier · SOIC-8

INA828IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RG passive Gain setting pin. Place an external gain-setting resistor R_G between pin 1 and pin 8. Gain equation: G = 1 + (50 kΩ / R_G), programmable from 1 to 1000 V/V.
2 -IN input Negative (inverting) analog input. Absolute-max input voltage ±40 V; operating common-mode range (V-)+2 V to (V+)-2 V.
3 +IN input Positive (noninverting) analog input. Absolute-max input voltage ±40 V; operating common-mode range (V-)+2 V to (V+)-2 V.
4 -VS power_in Negative supply rail. Dual-supply range −2.25 V to −18 V (or connect to GND for single-supply operation from 4.5 V to 36 V on +VS).
5 REF input Reference input that sets the output zero level. Must be driven by a low-impedance source; R_IN ≈ 40 kΩ, gain to output = 1 V/V.
6 OUT output Amplifier output. Rail-to-rail-ish swing to within 0.15 V of the supply rails; short-circuit current ±18 mA; stable with up to 1 nF capacitive load.
7 +VS power_in Positive supply rail. Single-supply 4.5 V to 36 V or dual-supply +2.25 V to +18 V; quiescent current 650 µA max.
8 RG passive Gain setting pin (second terminal). Place an external gain resistor R_G between pin 1 and pin 8. Gain equation: G = 1 + (50 kΩ / R_G).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • INA828IDR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Signal input pins voltage -40 40 V 4
Supply voltage -18 18 V 4
REF pin voltage -18 18 V 4
Operating temperature, TA TA -50 150 °C 4
Junction temperature, TJ TJ 175 °C 4
Storage temperature, Tstg Tstg -65 150 °C 4
Supply voltage, single supply 4.5 36 V Single supply 4
Supply voltage, dual supply 2.25 18 V Dual supply, printed ±2.25 V to ±18 V 4
Specified temperature -40 125 °C 4
Operating temperature -50 150 °C 4
Junction-to-ambient thermal resistance RθJA 119.6 °C/W D (SOIC) 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 66.3 °C/W D (SOIC) 8 pins 4
Junction-to-board thermal resistance RθJB 61.9 °C/W D (SOIC) 8 pins 4
Junction-to-top characterization parameter ψJT 20.5 °C/W D (SOIC) 8 pins 4
Junction-to-board characterization parameter ψJB 61.4 °C/W D (SOIC) 8 pins 4
Input stage offset voltage VOSI 20 50 µV G = 100, RTI 5
Input stage offset voltage over temperature VOSI 90 µV TA = –40°C to +125°C 5
Output stage offset voltage VOSO 50 250 µV G = 1, RTI 5
Output stage offset voltage over temperature VOSO 500 µV TA = –40°C to +125°C 5
Input overvoltage range -40 40 V TA = –40°C to +125°C 5
Common-mode rejection ratio CMRR 90 100 dB At dc to 60 Hz, RTI, VCM = (V–) + 2 V to (V+) – 2 V, G = 1 5
Common-mode rejection ratio CMRR 110 120 dB At dc to 60 Hz, RTI, VCM = (V–) + 2 V to (V+) – 2 V, G = 10 5
Common-mode rejection ratio CMRR 130 140 dB At dc to 60 Hz, RTI, VCM = (V–) + 2 V to (V+) – 2 V, G = 100 5
Common-mode rejection ratio CMRR 140 145 dB At dc to 60 Hz, RTI, VCM = (V–) + 2 V to (V+) – 2 V, G = 1000 5
Input bias current IB 0.15 0.6 nA VCM = VS / 2 5
Input bias current over temperature IB 2 nA TA = –40°C to +125°C 5
Input offset current IOS 0.15 0.6 nA VCM = VS / 2 5
Input offset current over temperature IOS 2 nA TA = –40°C to +125°C 5
Gain error GE -0.025 0.005 0.025 % G = 1, VO = ±10 V 5
Gain error GE -0.15 0.025 0.15 % G = 10, VO = ±10 V 5
Gain error GE -0.05 0.05 % G = 1000, VO = ±10 V 5
Gain vs temperature -5 5 ppm/°C G = 1, TA = –40°C to +125°C 5
Gain vs temperature -50 50 ppm/°C G > 1, TA = –40°C to +125°C 5
Gain nonlinearity 1 10 ppm G = 1 to 10, VO = –10 V to +10 V, RL = 10 kΩ 6
Gain nonlinearity 15 ppm G = 100, VO = –10 V to +10 V, RL = 10 kΩ 6
Gain nonlinearity 20 ppm G = 1000, VO = –10 V to +10 V, RL = 10 kΩ 6
Gain nonlinearity 30 ppm G = 1 to 100, VO = –10 V to +10 V, RL = 2 kΩ 6
Load capacitance stability 1000 pF 6
Short-circuit current ISC -18 18 mA Continuous to VS / 2 6
Quiescent current IQ 600 650 µA VIN = 0 V 6
Quiescent current over temperature IQ 850 µA vs temperature, TA = –40°C to +125°C 6

CAD (KiCad official)

  • Symbol: INA828IDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ina828idr-etched.step / ina828idr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina828idr.step / ina828idr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ina828idr.step 122 KB You want the bare part, or you mark your own boards.
ina828idr-etched.step 2.0 MB You want the part with INA828IDR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 499 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 6f3ae5a81e3d3eb9, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF