3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA826AIDRGR
Texas Instruments · Instrumentation Amplifiers · WSON-8-EP(3x3)
INA826AIDRGR from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) input with input protection up to ±40 V beyond supply rails. |
| 2 | RG | passive | Gain setting pin; place external resistor between pins 2 and 3 to set gain from 1 to 1000. |
| 3 | RG | passive | Gain setting pin; place external resistor between pins 2 and 3 to set gain from 1 to 1000. |
| 4 | +IN | input | Positive (noninverting) input with input protection up to ±40 V beyond supply rails. |
| 5 | -VS | power_in | Negative supply rail; voltage range ±1.5 V to ±18 V in dual-supply mode or ground in single-supply mode. |
| 6 | REF | input | Reference input; must be driven by low impedance source. |
| 7 | VOUT | output | Rail-to-rail output capable of swinging from near negative supply to near positive supply. |
| 8 | +VS | power_in | Positive supply rail; voltage range 3 V to 36 V in single-supply mode or ±1.5 V to ±18 V in dual-supply mode. |
| 9 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input stage offset voltage | VOSI | 40 | 150 | µV | RTI | 6 | |
| Input stage offset voltage vs temperature | 0.4 | 2 | µV/°C | vs temperature, TA = –40°C to +125°C | 6 | ||
| Output stage offset voltage | VOSO | 200 | 700 | µV | RTI | 6 | |
| Output stage offset voltage vs temperature | 2 | 10 | µV/°C | vs temperature, TA = –40°C to +125°C | 6 | ||
| Power-supply rejection ratio G=1 | PSRR | 100 | 124 | dB | G = 1, RTI | 6 | |
| Power-supply rejection ratio G=10 | PSRR | 115 | 130 | dB | G = 10, RTI | 6 | |
| Power-supply rejection ratio G=100 | PSRR | 120 | 140 | dB | G = 100, RTI | 6 | |
| Power-supply rejection ratio G=1000 | PSRR | 120 | 140 | dB | G = 1000, RTI | 6 | |
| Input overvoltage range | -40 | 40 | V | TA = –40°C to +125°C | 6 | ||
| Common-mode rejection ratio G=1 (dc to 60 Hz) | CMRR | 84 | 95 | dB | At dc to 60 Hz, RTI; G = 1, VCM = (V–) to (V+) – 1 V | 6 | |
| Common-mode rejection ratio G=10 (dc to 60 Hz) | CMRR | 104 | 115 | dB | At dc to 60 Hz, RTI; G = 10, VCM = (V–) to (V+) – 1 V | 6 | |
| Common-mode rejection ratio G=100 (dc to 60 Hz) | CMRR | 120 | 130 | dB | At dc to 60 Hz, RTI; G = 100, VCM = (V–) to (V+) – 1 V | 6 | |
| Common-mode rejection ratio G=1000 (dc to 60 Hz) | CMRR | 120 | 130 | dB | At dc to 60 Hz, RTI; G = 1000, VCM = (V–) to (V+) – 1 V | 6 | |
| Common-mode rejection ratio G=1 over temperature | CMRR | 80 | dB | G = 1, VCM = (V–) to (V+) – 1 V, TA = –40°C to +125°C | 6 | ||
| Common-mode rejection ratio G=1 at 5 kHz | CMRR | 84 | dB | At 5 kHz, RTI; G = 1, VCM = (V–) to (V+) – 1 V | 6 | ||
| Common-mode rejection ratio G=10 at 5 kHz | CMRR | 100 | dB | At 5 kHz, RTI; G = 10, VCM = (V–) to (V+) – 1 V | 6 | ||
| Common-mode rejection ratio G=100 at 5 kHz | CMRR | 105 | dB | At 5 kHz, RTI; G = 100, VCM = (V–) to (V+) – 1 V | 6 | ||
| Common-mode rejection ratio G=1000 at 5 kHz | CMRR | 105 | dB | At 5 kHz, RTI; G = 1000, VCM = (V–) to (V+) – 1 V | 6 | ||
| Input bias current | IB | 35 | 65 | nA | VCM = VS / 2 | 6 | |
| Input bias current over temperature | IB | 95 | nA | TA = –40°C to +125°C | 6 | ||
| Input offset current | IOS | 0.7 | 5 | nA | VCM = VS / 2 | 6 | |
| Input offset current over temperature | IOS | 10 | nA | TA = –40°C to +125°C | 6 | ||
| Input stage voltage noise | eNI | 18 | 20 | nV/√Hz | f = 1 kHz, G = 100, RS = 0 Ω | 6 | |
| Output stage voltage noise | eNO | 110 | 115 | nV/√Hz | f = 1 kHz, G = 1, RS = 0 Ω | 6 | |
| Range of gain | 1 | 1000 | V/V | 7 | |||
| Gain error G=1 | GE | -0.015 | 0.003 | 0.015 | % | G = 1, VO = ±10 V | 7 |
| Gain error G=10 | GE | -0.15 | 0.03 | 0.15 | % | G = 10, VO = ±10 V | 7 |
| Gain error G=100 | GE | -0.15 | 0.04 | 0.15 | % | G = 100, VO = ±10 V | 7 |
| Gain error G=1000 | GE | -0.15 | 0.04 | 0.15 | % | G = 1000, VO = ±10 V | 7 |
| Gain vs temperature G=1 | -1 | 0.1 | 1 | ppm/°C | G = 1, TA = –40°C to +125°C | 7 | |
| Gain vs temperature G>1 | -35 | 10 | 35 | ppm/°C | G > 1, TA = –40°C to +125°C | 7 | |
| Gain nonlinearity G=1 to 100 | 1 | 5 | ppm | G = 1 to 100, VO = –10 V to +10 V | 7 | ||
| Gain nonlinearity G=1000 | 5 | 20 | ppm | G = 1000, VO = –10 V to +10 V | 7 | ||
| Short-circuit current | ISC | -16 | 16 | mA | Continuous to VS / 2 | 7 | |
| Load capacitance stability | 1000 | pF | 7 | ||||
| Quiescent current | IQ | 200 | 250 | µA | VIN = 0 V | 7 | |
| Quiescent current over temperature | IQ | 250 | 300 | µA | vs temperature, TA = –40°C to +125°C | 7 | |
| Supply voltage (absolute maximum) | -20 | 20 | V | 5 | |||
| Voltage, REF pin (absolute maximum) | -20 | 20 | V | 5 | |||
| Operating free-air temperature | TA | -50 | 150 | °C | 5 | ||
| Junction temperature | TJ | 175 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage single-supply (recommended) | 3 | 36 | V | 5 | |||
| Supply voltage dual-supply (recommended, ±) | 1.5 | 18 | V | 5 | |||
| Specified temperature range | TA | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance (DRG) | RθJA | 50.9 | °C/W | DRG (WSON) 8 pins | 5 | ||
| Junction-to-case (top) thermal resistance (DRG) | RθJC(top) | 60 | °C/W | DRG (WSON) 8 pins | 5 | ||
| Junction-to-board thermal resistance (DRG) | RθJB | 25.4 | °C/W | DRG (WSON) 8 pins | 5 | ||
| Junction-to-top characterization parameter (DRG) | ψJT | 1.2 | °C/W | DRG (WSON) 8 pins | 5 | ||
| Junction-to-board characterization parameter (DRG) | ψJB | 25.5 | °C/W | DRG (WSON) 8 pins | 5 | ||
| Junction-to-case (bottom) thermal resistance (DRG) | RθJC(bot) | 7.2 | °C/W | DRG (WSON) 8 pins | 5 |
CAD (KiCad official)
- Symbol:
INA826AIDRGR - Footprint:
Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm - 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
ina826aidrgr-etched.step/ina826aidrgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina826aidrgr.step/ina826aidrgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
4e22264df3133e54, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).