component
INA826AIDR
Public Made by Adomby adom
Texas Instruments Instrumentation OpAmps, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownINA826AIDR
Texas Instruments · Instrumentation OpAmps · SOIC-8
INA826AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) differential input to the instrumentation amplifier. Input common-mode range includes V- and is protected to ±40 V. |
| 2 | RG | passive | Gain-setting pin. Connect an external resistor R_G between pin 2 and pin 3 to set the gain per G = 1 + 49.4 kΩ / R_G. Leave open for G = 1. |
| 3 | RG | passive | Gain-setting pin. Connect an external resistor R_G between pin 2 and pin 3 to set the gain per G = 1 + 49.4 kΩ / R_G. Leave open for G = 1. |
| 4 | +IN | input | Positive (noninverting) differential input to the instrumentation amplifier. Input common-mode range includes V- and is protected to ±40 V. |
| 5 | -VS | power_in | Negative supply rail. Connect to GND for single-supply operation (V+ = 3 V to 36 V) or to a negative rail for dual-supply operation (±1.5 V to ±18 V). Bypass with 0.1 µF to ground. |
| 6 | REF | input | Reference input that sets the output zero level (V_O = G × (V_IN+ − V_IN−) + V_REF). Must be driven by a low-impedance source; range −20 V to +20 V relative to ground. |
| 7 | VOUT | output | Rail-to-rail amplifier output. Drives loads referenced to REF; short-circuit protected (short to V_S/2). |
| 8 | +VS | power_in | Positive supply rail. 3 V to 36 V single-supply or +1.5 V to +18 V dual-supply. Bypass with 0.1 µF to ground close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
INA826AIDRINA826AIDRIDGKRINA826AIDRIDGKINA826AIDRGRINA826AIDRG
CAD (KiCad official)
- Symbol:
INA826AIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina826aidr-etched.step/ina826aidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina826aidr.step/ina826aidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
5f68e2622e9dc460, retrieved 2026-08-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).