main
Ray
ina826aid: specified limits as data (metadata.characteristics, 50 rows from the datasheet)
7d1afd2
INA826AID
Texas Instruments · Instrumentation Amplifiers · SOIC-8
INA826AID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) differential signal input with input common-mode range from V- to (V+) - 1 V and overvoltage protection up to ±40 V. |
| 2 | RG | passive | Gain-setting resistor connection point 1; external resistor connected between pins 2 and 3 sets gain according to G = 1 + 49.4 kΩ/RG for gains from 1 to 1000 V/V. |
| 3 | RG | passive | Gain-setting resistor connection point 2; external resistor connected between pins 2 and 3 sets gain according to G = 1 + 49.4 kΩ/RG for gains from 1 to 1000 V/V. |
| 4 | +IN | input | Positive (noninverting) differential signal input with input common-mode range from V- to (V+) - 1 V and overvoltage protection up to ±40 V. |
| 5 | -VS | power_in | Negative supply voltage with range ±1.5 V to ±18 V (dual supply) or 3 V to 36 V (single supply); internally connected to exposed thermal pad on underside. |
| 6 | REF | input | Reference input with 100 kΩ input impedance and 1 V/V gain to output; must be driven by low-impedance source (<5 Ω recommended) to maintain minimum 100 dB CMRR at G = 10. |
| 7 | VOUT | output | Rail-to-rail output with voltage swing from (V-) + 0.1 V to (V+) - 0.15 V; capable of driving 10 kΩ load and sourcing/sinking ±16 mA continuous to VS/2. |
| 8 | +VS | power_in | Positive supply voltage with range ±1.5 V to ±18 V (dual supply) or 3 V to 36 V (single supply). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | -20 | 20 | V | 5 | |||
| Signal input pins voltage (absolute maximum) | -40 | 40 | V | Printed as (–VS) – 40 and (+VS) + 40 V; min applies to –VS, max to +VS | 5 | ||
| REF pin voltage (absolute maximum) | -20 | 20 | V | REF pin | 5 | ||
| Operating free-air temperature (absolute maximum) | TA | -50 | 150 | °C | Operating, TA | 5 | |
| Junction temperature (absolute maximum) | TJ | 175 | °C | Junction, TJ | 5 | ||
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | Storage, Tstg | 5 | |
| ESD human-body model | V(ESD) | -2500 | 2500 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 5 | |
| ESD charged-device model | V(ESD) | -1500 | 1500 | V | CDM, per JEDEC JESD22-C101 | 5 | |
| ESD machine model | V(ESD) | -150 | 150 | V | MM | 5 | |
| Supply voltage, single-supply | 3 | 36 | V | Single-supply | 5 | ||
| Supply voltage, dual-supply | 1.5 | 18 | V | Dual-supply, printed as ±1.5 V and ±18 V | 5 | ||
| Specified temperature range | TA | -40 | 125 | °C | Specified temperature, TA | 5 | |
| Input offset voltage, input stage | VOSI | 40 | 150 | µV | RTI | 6 | |
| Input offset voltage drift, input stage | VOSI | 0.4 | 2 | µV/°C | TA = –40°C to +125°C | 6 | |
| Output stage offset voltage | VOSO | 200 | 700 | µV | RTI | 6 | |
| Output stage offset voltage drift | VOSO | 2 | 10 | µV/°C | vs temperature, TA = –40°C to +125°C | 6 | |
| Power-supply rejection ratio | PSRR | 100 | 124 | dB | G = 1, RTI | 6 | |
| Power-supply rejection ratio | PSRR | 115 | 130 | dB | G = 10, RTI | 6 | |
| Power-supply rejection ratio | PSRR | 120 | 140 | dB | G = 100, RTI | 6 | |
| Input overvoltage range | -40 | 40 | V | TA = –40°C to +125°C; printed as ±40 V | 6 | ||
| Common-mode rejection ratio | CMRR | 84 | 95 | dB | At dc to 60 Hz, RTI, G = 1, VCM = (V–) to (V+) – 1 V | 6 | |
| Common-mode rejection ratio | CMRR | 104 | 115 | dB | At dc to 60 Hz, RTI, G = 10, VCM = (V–) to (V+) – 1 V | 6 | |
| Common-mode rejection ratio | CMRR | 120 | 130 | dB | At dc to 60 Hz, RTI, G = 100, VCM = (V–) to (V+) – 1 V | 6 | |
| Common-mode rejection ratio | CMRR | 80 | dB | At dc to 60 Hz, RTI, G = 1, VCM = (V–) to (V+) – 1 V, TA = –40°C to +125°C | 6 | ||
| Common-mode rejection ratio at 5 kHz | CMRR | 84 | dB | At 5 kHz, RTI, G = 1, VCM = (V–) to (V+) – 1 V | 6 | ||
| Common-mode rejection ratio at 5 kHz | CMRR | 100 | dB | At 5 kHz, RTI, G = 10, VCM = (V–) to (V+) – 1 V | 6 | ||
| Common-mode rejection ratio at 5 kHz | CMRR | 105 | dB | At 5 kHz, RTI, G = 100, VCM = (V–) to (V+) – 1 V | 6 | ||
| Input bias current | IB | 35 | 65 | nA | VCM = VS / 2 | 6 | |
| Input bias current | IB | 95 | nA | TA = –40°C to +125°C | 6 | ||
| Input offset current | IOS | 0.7 | 5 | nA | VCM = VS / 2 | 6 | |
| Input offset current | IOS | 10 | nA | TA = –40°C to +125°C | 6 | ||
| Input stage voltage noise | eNI | 18 | 20 | nV/√Hz | f = 1 kHz, G = 100, RS = 0 Ω | 6 | |
| Output stage voltage noise | eNO | 110 | 115 | nV/√Hz | f = 1 kHz, G = 1, RS = 0 Ω | 6 | |
| Range of gain | G | 1 | 1000 | V/V | 7 | ||
| Gain error | GE | -0.015 | 0.003 | 0.015 | % | G = 1, VO = ±10 V; printed ±0.003% typ, ±0.015% max | 7 |
| Gain error | GE | -0.15 | 0.03 | 0.15 | % | G = 10, VO = ±10 V; printed ±0.03% typ, ±0.15% max | 7 |
| Gain error | GE | -0.15 | 0.04 | 0.15 | % | G = 100, VO = ±10 V; printed ±0.04% typ, ±0.15% max | 7 |
| Gain vs temperature | -1 | 0.1 | 1 | ppm/°C | G = 1, TA = –40°C to +125°C; printed ±0.1 typ, ±1 max | 7 | |
| Gain vs temperature | -35 | 10 | 35 | ppm/°C | G > 1, TA = –40°C to +125°C; printed ±10 typ, ±35 max | 7 | |
| Gain nonlinearity | 1 | 5 | ppm | G = 1 to 100, VO = –10 V to +10 V | 7 | ||
| Gain nonlinearity | 5 | 20 | ppm | G = 1000, VO = –10 V to +10 V | 7 | ||
| Voltage swing | 0.1 | 0.15 | V | RL = 10 kΩ; min is (V–) + 0.1 V, max is (V+) – 0.15 V as printed | 7 | ||
| Load capacitance stability | 1000 | pF | 7 | ||||
| Quiescent current | IQ | 200 | 250 | µA | VIN = 0 V | 7 | |
| Quiescent current vs temperature | IQ | 250 | 300 | µA | vs temperature, TA = –40°C to +125°C | 7 | |
| Thermal resistance, junction-to-ambient (D, SOIC-8) | RθJA | 141.4 | °C/W | D (SOIC), 8 pins | 5 | ||
| Thermal resistance, junction-to-case (top) (D, SOIC-8) | RθJC(top) | 75.4 | °C/W | D (SOIC), 8 pins | 5 | ||
| Thermal resistance, junction-to-board (D, SOIC-8) | RθJB | 59.6 | °C/W | D (SOIC), 8 pins | 5 | ||
| Junction-to-top characterization parameter (D, SOIC-8) | ψJT | 27.4 | °C/W | D (SOIC), 8 pins | 5 | ||
| Junction-to-board characterization parameter (D, SOIC-8) | ψJB | 59.1 | °C/W | D (SOIC), 8 pins | 5 |
CAD (KiCad official)
- Symbol:
INA826AID - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina826aid-etched.step/ina826aid-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina826aid.step/ina826aid.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
4e22264df3133e54, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA826AID
**Texas Instruments** · Instrumentation Amplifiers · SOIC-8
INA826AID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) differential signal input with input common-mode range from V- to (V+) - 1 V and overvoltage protection up to ±40 V. |
| 2 | RG | passive | Gain-setting resistor connection point 1; external resistor connected between pins 2 and 3 sets gain according to G = 1 + 49.4 kΩ/RG for gains from 1 to 1000 V/V. |
| 3 | RG | passive | Gain-setting resistor connection point 2; external resistor connected between pins 2 and 3 sets gain according to G = 1 + 49.4 kΩ/RG for gains from 1 to 1000 V/V. |
| 4 | +IN | input | Positive (noninverting) differential signal input with input common-mode range from V- to (V+) - 1 V and overvoltage protection up to ±40 V. |
| 5 | -VS | power_in | Negative supply voltage with range ±1.5 V to ±18 V (dual supply) or 3 V to 36 V (single supply); internally connected to exposed thermal pad on underside. |
| 6 | REF | input | Reference input with 100 kΩ input impedance and 1 V/V gain to output; must be driven by low-impedance source (<5 Ω recommended) to maintain minimum 100 dB CMRR at G = 10. |
| 7 | VOUT | output | Rail-to-rail output with voltage swing from (V-) + 0.1 V to (V+) - 0.15 V; capable of driving 10 kΩ load and sourcing/sinking ±16 mA continuous to VS/2. |
| 8 | +VS | power_in | Positive supply voltage with range ±1.5 V to ±18 V (dual supply) or 3 V to 36 V (single supply). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | | -20 | | 20 | V | | 5 |
| Signal input pins voltage (absolute maximum) | | -40 | | 40 | V | Printed as (–VS) – 40 and (+VS) + 40 V; min applies to –VS, max to +VS | 5 |
| REF pin voltage (absolute maximum) | | -20 | | 20 | V | REF pin | 5 |
| Operating free-air temperature (absolute maximum) | TA | -50 | | 150 | °C | Operating, TA | 5 |
| Junction temperature (absolute maximum) | TJ | | | 175 | °C | Junction, TJ | 5 |
| Storage temperature (absolute maximum) | Tstg | -65 | | 150 | °C | Storage, Tstg | 5 |
| ESD human-body model | V(ESD) | -2500 | | 2500 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 5 |
| ESD charged-device model | V(ESD) | -1500 | | 1500 | V | CDM, per JEDEC JESD22-C101 | 5 |
| ESD machine model | V(ESD) | -150 | | 150 | V | MM | 5 |
| Supply voltage, single-supply | | 3 | | 36 | V | Single-supply | 5 |
| Supply voltage, dual-supply | | 1.5 | | 18 | V | Dual-supply, printed as ±1.5 V and ±18 V | 5 |
| Specified temperature range | TA | -40 | | 125 | °C | Specified temperature, TA | 5 |
| Input offset voltage, input stage | VOSI | | 40 | 150 | µV | RTI | 6 |
| Input offset voltage drift, input stage | VOSI | | 0.4 | 2 | µV/°C | TA = –40°C to +125°C | 6 |
| Output stage offset voltage | VOSO | | 200 | 700 | µV | RTI | 6 |
| Output stage offset voltage drift | VOSO | | 2 | 10 | µV/°C | vs temperature, TA = –40°C to +125°C | 6 |
| Power-supply rejection ratio | PSRR | 100 | 124 | | dB | G = 1, RTI | 6 |
| Power-supply rejection ratio | PSRR | 115 | 130 | | dB | G = 10, RTI | 6 |
| Power-supply rejection ratio | PSRR | 120 | 140 | | dB | G = 100, RTI | 6 |
| Input overvoltage range | | -40 | | 40 | V | TA = –40°C to +125°C; printed as ±40 V | 6 |
| Common-mode rejection ratio | CMRR | 84 | 95 | | dB | At dc to 60 Hz, RTI, G = 1, VCM = (V–) to (V+) – 1 V | 6 |
| Common-mode rejection ratio | CMRR | 104 | 115 | | dB | At dc to 60 Hz, RTI, G = 10, VCM = (V–) to (V+) – 1 V | 6 |
| Common-mode rejection ratio | CMRR | 120 | 130 | | dB | At dc to 60 Hz, RTI, G = 100, VCM = (V–) to (V+) – 1 V | 6 |
| Common-mode rejection ratio | CMRR | 80 | | | dB | At dc to 60 Hz, RTI, G = 1, VCM = (V–) to (V+) – 1 V, TA = –40°C to +125°C | 6 |
| Common-mode rejection ratio at 5 kHz | CMRR | 84 | | | dB | At 5 kHz, RTI, G = 1, VCM = (V–) to (V+) – 1 V | 6 |
| Common-mode rejection ratio at 5 kHz | CMRR | 100 | | | dB | At 5 kHz, RTI, G = 10, VCM = (V–) to (V+) – 1 V | 6 |
| Common-mode rejection ratio at 5 kHz | CMRR | 105 | | | dB | At 5 kHz, RTI, G = 100, VCM = (V–) to (V+) – 1 V | 6 |
| Input bias current | IB | | 35 | 65 | nA | VCM = VS / 2 | 6 |
| Input bias current | IB | | | 95 | nA | TA = –40°C to +125°C | 6 |
| Input offset current | IOS | | 0.7 | 5 | nA | VCM = VS / 2 | 6 |
| Input offset current | IOS | | | 10 | nA | TA = –40°C to +125°C | 6 |
| Input stage voltage noise | eNI | | 18 | 20 | nV/√Hz | f = 1 kHz, G = 100, RS = 0 Ω | 6 |
| Output stage voltage noise | eNO | | 110 | 115 | nV/√Hz | f = 1 kHz, G = 1, RS = 0 Ω | 6 |
| Range of gain | G | 1 | | 1000 | V/V | | 7 |
| Gain error | GE | -0.015 | 0.003 | 0.015 | % | G = 1, VO = ±10 V; printed ±0.003% typ, ±0.015% max | 7 |
| Gain error | GE | -0.15 | 0.03 | 0.15 | % | G = 10, VO = ±10 V; printed ±0.03% typ, ±0.15% max | 7 |
| Gain error | GE | -0.15 | 0.04 | 0.15 | % | G = 100, VO = ±10 V; printed ±0.04% typ, ±0.15% max | 7 |
| Gain vs temperature | | -1 | 0.1 | 1 | ppm/°C | G = 1, TA = –40°C to +125°C; printed ±0.1 typ, ±1 max | 7 |
| Gain vs temperature | | -35 | 10 | 35 | ppm/°C | G > 1, TA = –40°C to +125°C; printed ±10 typ, ±35 max | 7 |
| Gain nonlinearity | | | 1 | 5 | ppm | G = 1 to 100, VO = –10 V to +10 V | 7 |
| Gain nonlinearity | | | 5 | 20 | ppm | G = 1000, VO = –10 V to +10 V | 7 |
| Voltage swing | | 0.1 | | 0.15 | V | RL = 10 kΩ; min is (V–) + 0.1 V, max is (V+) – 0.15 V as printed | 7 |
| Load capacitance stability | | | | 1000 | pF | | 7 |
| Quiescent current | IQ | | 200 | 250 | µA | VIN = 0 V | 7 |
| Quiescent current vs temperature | IQ | | 250 | 300 | µA | vs temperature, TA = –40°C to +125°C | 7 |
| Thermal resistance, junction-to-ambient (D, SOIC-8) | RθJA | | 141.4 | | °C/W | D (SOIC), 8 pins | 5 |
| Thermal resistance, junction-to-case (top) (D, SOIC-8) | RθJC(top) | | 75.4 | | °C/W | D (SOIC), 8 pins | 5 |
| Thermal resistance, junction-to-board (D, SOIC-8) | RθJB | | 59.6 | | °C/W | D (SOIC), 8 pins | 5 |
| Junction-to-top characterization parameter (D, SOIC-8) | ψJT | | 27.4 | | °C/W | D (SOIC), 8 pins | 5 |
| Junction-to-board characterization parameter (D, SOIC-8) | ψJB | | 59.1 | | °C/W | D (SOIC), 8 pins | 5 |
## CAD (KiCad official)
- Symbol: `INA826AID`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ina826aid-etched.step` / `ina826aid-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina826aid.step` / `ina826aid.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina826) (51 pp, sha256 `4e22264df3133e54`, retrieved 2026-09-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina826aid-datasheet.pdf)