main
Ray
ina821idr: laser-etched CAD + chip hero (factory 2.0.0 backfill)
01b4d3f
INA821IDR
Texas Instruments · Instrumentation Amplifiers · SOIC-8
INA821IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) analog input to the instrumentation amplifier. Protected up to ±40 V. Signal input voltage range −40 V to +40 V (absolute max). |
| 2 | RG | passive | Gain-setting pin. Place an external gain resistor RG between pin 2 and pin 3 to set gain per G = 1 + 49.4 kΩ / RG. Leave open for unity gain (G = 1). |
| 3 | RG | passive | Gain-setting pin. Place an external gain resistor RG between pin 2 and pin 3 to set gain per G = 1 + 49.4 kΩ / RG. Leave open for unity gain (G = 1). |
| 4 | +IN | input | Positive (noninverting) analog input to the instrumentation amplifier. Protected up to ±40 V. Signal input voltage range −40 V to +40 V (absolute max). |
| 5 | -VS | power_in | Negative supply rail. Connect to GND for single-supply operation or to the negative rail for dual-supply operation. Total supply range 4.5 V to 36 V (single) or ±2.25 V to ±18 V (dual). |
| 6 | REF | input | Reference input that sets the output-voltage zero level (VOUT = G × (VIN+ − VIN−) + VREF). Must be driven from a low-impedance source to preserve common-mode rejection. |
| 7 | OUT | output | Amplifier output. Output swings within (−VS − 0.5 V) to (+VS + 0.5 V) absolute limits and is short-circuit protected (continuous short to VS/2). |
| 8 | +VS | power_in | Positive supply rail. Total supply range 4.5 V to 36 V (single) or ±2.25 V to ±18 V (dual). Quiescent supply current 650 µA (max). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
INA821IDRINA821IDRIDGKRINA821IDRIDGKINA821IDRGRINA821IDRG
CAD (KiCad official)
- Symbol:
INA821IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina821idr-etched.step/ina821idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina821idr.step/ina821idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
f0b5748985ffaabb, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA821IDR
**Texas Instruments** · Instrumentation Amplifiers · SOIC-8
INA821IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) analog input to the instrumentation amplifier. Protected up to ±40 V. Signal input voltage range −40 V to +40 V (absolute max). |
| 2 | RG | passive | Gain-setting pin. Place an external gain resistor RG between pin 2 and pin 3 to set gain per G = 1 + 49.4 kΩ / RG. Leave open for unity gain (G = 1). |
| 3 | RG | passive | Gain-setting pin. Place an external gain resistor RG between pin 2 and pin 3 to set gain per G = 1 + 49.4 kΩ / RG. Leave open for unity gain (G = 1). |
| 4 | +IN | input | Positive (noninverting) analog input to the instrumentation amplifier. Protected up to ±40 V. Signal input voltage range −40 V to +40 V (absolute max). |
| 5 | -VS | power_in | Negative supply rail. Connect to GND for single-supply operation or to the negative rail for dual-supply operation. Total supply range 4.5 V to 36 V (single) or ±2.25 V to ±18 V (dual). |
| 6 | REF | input | Reference input that sets the output-voltage zero level (VOUT = G × (VIN+ − VIN−) + VREF). Must be driven from a low-impedance source to preserve common-mode rejection. |
| 7 | OUT | output | Amplifier output. Output swings within (−VS − 0.5 V) to (+VS + 0.5 V) absolute limits and is short-circuit protected (continuous short to VS/2). |
| 8 | +VS | power_in | Positive supply rail. Total supply range 4.5 V to 36 V (single) or ±2.25 V to ±18 V (dual). Quiescent supply current 650 µA (max). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `INA821IDR`
- `INA821IDRIDGKR`
- `INA821IDRIDGK`
- `INA821IDRGR`
- `INA821IDRG`
## CAD (KiCad official)
- Symbol: `INA821IDR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ina821idr-etched.step` / `ina821idr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina821idr.step` / `ina821idr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina821.pdf) (50 pp, sha256 `f0b5748985ffaabb`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina821idr-datasheet.pdf)