main
Ray
Publish 0.1.0
123bddd
INA819ID
Texas Instruments · Instrumentation Amplifiers · SOIC-8
INA819ID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) input of the instrumentation amplifier; the INA819 inputs are protected against overvoltage up to ±60 V. |
| 2 | RG | passive | Gain setting pin; place a single external gain resistor between pin 2 and pin 3 to set gain G = 1 + 50 kΩ / RG. |
| 3 | RG | passive | Gain setting pin; place a single external gain resistor between pin 2 and pin 3 to set gain G = 1 + 50 kΩ / RG. |
| 4 | +IN | input | Positive (noninverting) input of the instrumentation amplifier; the INA819 inputs are protected against overvoltage up to ±60 V. |
| 5 | -VS | power_in | Negative supply; the INA819 operates from a 4.5 V to 36 V single supply or ±2.25 V to ±18 V dual supply. |
| 6 | REF | input | Reference input that must be driven by a low impedance source; the REF pin is rated ±20 V. |
| 7 | OUT | output | Amplifier output; signal output pins are rated for a maximum current of ±50 mA and continuous short-circuit operation. |
| 8 | +VS | power_in | Positive supply; the INA819 operates from a 4.5 V to 36 V single supply or ±2.25 V to ±18 V dual supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input stage offset voltage | VOSI | 10 | 35 | µV | TA = 25°C, VS = ±15 V, RL = 10 kΩ, VREF = 0 V, G = 1 | 6 | |
| Input stage offset voltage over temperature | VOSI | 75 | µV | TA = -40°C to +125°C | 6 | ||
| Output stage offset voltage | VOSO | 50 | 300 | µV | TA = 25°C | 6 | |
| Output stage offset voltage over temperature | VOSO | 800 | µV | TA = -40°C to +125°C | 6 | ||
| Output stage offset voltage drift | VOSO | -5 | 5 | µV/°C | vs temperature, TA = -40°C to +125°C | 6 | |
| Power-supply rejection ratio G=1 | PSRR | 110 | 120 | dB | G = 1, RTI | 6 | |
| Power-supply rejection ratio G=10 | PSRR | 114 | 130 | dB | G = 10, RTI | 6 | |
| Power-supply rejection ratio G=100 | PSRR | 130 | 135 | dB | G = 100, RTI | 6 | |
| Power-supply rejection ratio G=1000 | PSRR | 136 | 140 | dB | G = 1000, RTI | 6 | |
| Input overvoltage range | -60 | 60 | V | TA = -40°C to +125°C | 6 | ||
| Common-mode rejection ratio G=1 | CMRR | 90 | 105 | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 1 | 6 | |
| Common-mode rejection ratio G=10 | CMRR | 110 | 125 | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 10 | 6 | |
| Common-mode rejection ratio G=100 | CMRR | 130 | 145 | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 100 | 6 | |
| Common-mode rejection ratio G=1000 | CMRR | 140 | 150 | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 1000 | 6 | |
| Input bias current | IB | 0.15 | 0.5 | nA | VCM = VS / 2 | 6 | |
| Input bias current over temperature | IB | 2 | nA | TA = -40°C to +125°C | 6 | ||
| Input offset current | IOS | 0.15 | 0.5 | nA | VCM = VS / 2 | 6 | |
| Input offset current over temperature | IOS | 2 | nA | TA = -40°C to +125°C | 6 | ||
| Gain range | G | 1 | 10000 | V/V | 7 | ||
| Gain error G=1 | GE | -0.025 | 0.005 | 0.025 | % | VO = ±10 V | 7 |
| Gain error G=10 | GE | -0.15 | 0.025 | 0.15 | % | VO = ±10 V | 7 |
| Gain error G=100 | GE | -0.15 | 0.025 | 0.15 | % | VO = ±10 V | 7 |
| Gain vs temperature G=1 | GTC | -5 | 5 | ppm/°C | G = 1, TA = -40°C to +125°C | 7 | |
| Gain vs temperature G>1 | GTC | -35 | 35 | ppm/°C | G > 1, TA = -40°C to +125°C | 7 | |
| Gain nonlinearity G=1 to 10 | 1 | 10 | ppm | G = 1 to 10, VO = -10 V to +10 V, RL = 10 kΩ | 7 | ||
| Load capacitance stability | CL | 1000 | pF | 7 | |||
| Short-circuit current | ISC | -20 | 20 | mA | Continuous to VS / 2 | 7 | |
| Quiescent current | IQ | 350 | 385 | µA | VIN = 0 V | 7 | |
| Quiescent current over temperature | IQ | 520 | µA | TA = -40°C to +125°C | 7 | ||
| Supply voltage dual supply | VS | -20 | 20 | V | dual supply, VS = (V+), (V-) | 5 | |
| Supply voltage single supply | VS | 40 | V | single supply, VS = (V+), (V-) | 5 | ||
| Signal input pins voltage | -60 | 60 | V | 5 | |||
| VREF pin voltage | VREF | -20 | 20 | V | 5 | ||
| Signal output pins current | -50 | 50 | mA | 5 | |||
| Operating temperature TA | TA | -50 | 150 | °C | over operating free-air temperature range | 5 | |
| Junction temperature TJ | TJ | 175 | °C | 5 | |||
| Storage temperature Tstg | Tstg | -65 | 150 | °C | 5 | ||
| Single-supply operating voltage VS | VS | 4.5 | 36 | V | Single-supply | 5 | |
| Dual-supply operating voltage VS | VS | 2.25 | 18 | V | Dual-supply, ±VS | 5 | |
| Specified temperature TA | TA | -40 | 125 | °C | Specified temperature | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 119.6 | °C/W | D (SOIC) package | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 66.3 | °C/W | D (SOIC) package | 5 | ||
| Junction-to-board thermal resistance | RθJB | 61.9 | °C/W | D (SOIC) package | 5 | ||
| Junction-to-top characterization parameter | ψJT | 20.5 | °C/W | D (SOIC) package | 5 | ||
| Junction-to-board characterization parameter | ψJB | 61.4 | °C/W | D (SOIC) package | 5 |
CAD (KiCad official)
- Symbol:
INA819ID - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina819id-etched.step/ina819id-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina819id.step/ina819id.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
a077b61fc9aa8e52, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA819ID
**Texas Instruments** · Instrumentation Amplifiers · SOIC-8
INA819ID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) input of the instrumentation amplifier; the INA819 inputs are protected against overvoltage up to ±60 V. |
| 2 | RG | passive | Gain setting pin; place a single external gain resistor between pin 2 and pin 3 to set gain G = 1 + 50 kΩ / RG. |
| 3 | RG | passive | Gain setting pin; place a single external gain resistor between pin 2 and pin 3 to set gain G = 1 + 50 kΩ / RG. |
| 4 | +IN | input | Positive (noninverting) input of the instrumentation amplifier; the INA819 inputs are protected against overvoltage up to ±60 V. |
| 5 | -VS | power_in | Negative supply; the INA819 operates from a 4.5 V to 36 V single supply or ±2.25 V to ±18 V dual supply. |
| 6 | REF | input | Reference input that must be driven by a low impedance source; the REF pin is rated ±20 V. |
| 7 | OUT | output | Amplifier output; signal output pins are rated for a maximum current of ±50 mA and continuous short-circuit operation. |
| 8 | +VS | power_in | Positive supply; the INA819 operates from a 4.5 V to 36 V single supply or ±2.25 V to ±18 V dual supply. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input stage offset voltage | VOSI | | 10 | 35 | µV | TA = 25°C, VS = ±15 V, RL = 10 kΩ, VREF = 0 V, G = 1 | 6 |
| Input stage offset voltage over temperature | VOSI | | | 75 | µV | TA = -40°C to +125°C | 6 |
| Output stage offset voltage | VOSO | | 50 | 300 | µV | TA = 25°C | 6 |
| Output stage offset voltage over temperature | VOSO | | | 800 | µV | TA = -40°C to +125°C | 6 |
| Output stage offset voltage drift | VOSO | -5 | | 5 | µV/°C | vs temperature, TA = -40°C to +125°C | 6 |
| Power-supply rejection ratio G=1 | PSRR | 110 | 120 | | dB | G = 1, RTI | 6 |
| Power-supply rejection ratio G=10 | PSRR | 114 | 130 | | dB | G = 10, RTI | 6 |
| Power-supply rejection ratio G=100 | PSRR | 130 | 135 | | dB | G = 100, RTI | 6 |
| Power-supply rejection ratio G=1000 | PSRR | 136 | 140 | | dB | G = 1000, RTI | 6 |
| Input overvoltage range | | -60 | | 60 | V | TA = -40°C to +125°C | 6 |
| Common-mode rejection ratio G=1 | CMRR | 90 | 105 | | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 1 | 6 |
| Common-mode rejection ratio G=10 | CMRR | 110 | 125 | | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 10 | 6 |
| Common-mode rejection ratio G=100 | CMRR | 130 | 145 | | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 100 | 6 |
| Common-mode rejection ratio G=1000 | CMRR | 140 | 150 | | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 1000 | 6 |
| Input bias current | IB | | 0.15 | 0.5 | nA | VCM = VS / 2 | 6 |
| Input bias current over temperature | IB | | | 2 | nA | TA = -40°C to +125°C | 6 |
| Input offset current | IOS | | 0.15 | 0.5 | nA | VCM = VS / 2 | 6 |
| Input offset current over temperature | IOS | | | 2 | nA | TA = -40°C to +125°C | 6 |
| Gain range | G | 1 | | 10000 | V/V | | 7 |
| Gain error G=1 | GE | -0.025 | 0.005 | 0.025 | % | VO = ±10 V | 7 |
| Gain error G=10 | GE | -0.15 | 0.025 | 0.15 | % | VO = ±10 V | 7 |
| Gain error G=100 | GE | -0.15 | 0.025 | 0.15 | % | VO = ±10 V | 7 |
| Gain vs temperature G=1 | GTC | -5 | | 5 | ppm/°C | G = 1, TA = -40°C to +125°C | 7 |
| Gain vs temperature G>1 | GTC | -35 | | 35 | ppm/°C | G > 1, TA = -40°C to +125°C | 7 |
| Gain nonlinearity G=1 to 10 | | | 1 | 10 | ppm | G = 1 to 10, VO = -10 V to +10 V, RL = 10 kΩ | 7 |
| Load capacitance stability | CL | | | 1000 | pF | | 7 |
| Short-circuit current | ISC | -20 | | 20 | mA | Continuous to VS / 2 | 7 |
| Quiescent current | IQ | | 350 | 385 | µA | VIN = 0 V | 7 |
| Quiescent current over temperature | IQ | | | 520 | µA | TA = -40°C to +125°C | 7 |
| Supply voltage dual supply | VS | -20 | | 20 | V | dual supply, VS = (V+), (V-) | 5 |
| Supply voltage single supply | VS | | | 40 | V | single supply, VS = (V+), (V-) | 5 |
| Signal input pins voltage | | -60 | | 60 | V | | 5 |
| VREF pin voltage | VREF | -20 | | 20 | V | | 5 |
| Signal output pins current | | -50 | | 50 | mA | | 5 |
| Operating temperature TA | TA | -50 | | 150 | °C | over operating free-air temperature range | 5 |
| Junction temperature TJ | TJ | | | 175 | °C | | 5 |
| Storage temperature Tstg | Tstg | -65 | | 150 | °C | | 5 |
| Single-supply operating voltage VS | VS | 4.5 | | 36 | V | Single-supply | 5 |
| Dual-supply operating voltage VS | VS | 2.25 | | 18 | V | Dual-supply, ±VS | 5 |
| Specified temperature TA | TA | -40 | | 125 | °C | Specified temperature | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 119.6 | | °C/W | D (SOIC) package | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 66.3 | | °C/W | D (SOIC) package | 5 |
| Junction-to-board thermal resistance | RθJB | | 61.9 | | °C/W | D (SOIC) package | 5 |
| Junction-to-top characterization parameter | ψJT | | 20.5 | | °C/W | D (SOIC) package | 5 |
| Junction-to-board characterization parameter | ψJB | | 61.4 | | °C/W | D (SOIC) package | 5 |
## CAD (KiCad official)
- Symbol: `INA819ID`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ina819id-etched.step` / `ina819id-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina819id.step` / `ina819id.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina819.pdf) (51 pp, sha256 `a077b61fc9aa8e52`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina819id-datasheet.pdf)