main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ina500cidbvr: viewers rendered from the public page · Ray
ina500cidbvr-etched.glb ina500cidbvr: factory component page (tier=mfr) · Ray
ina500cidbvr-etched.step ina500cidbvr: factory component page (tier=mfr) · Ray
ina500cidbvr-hero.glb ina500cidbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
ina500cidbvr-hero.overlay.json ina500cidbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
ina500cidbvr.glb Publish 0.1.0 · Ray
ina500cidbvr.kicad_mod Publish 0.1.0 · Ray
ina500cidbvr.kicad_sym Publish 0.1.0 · Ray
ina500cidbvr.lbr Publish 0.1.0 · Ray
ina500cidbvr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

INA500CIDBVR

Texas Instruments · Others · SOT-23-6

INA500CIDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, developed with respect to the voltage on the REF pin.
2 V- power_in Negative supply; supply range VS = (V+) - (V-) is 1.7V to 5.5V single-supply (±0.85V to ±2.75V dual-supply).
3 IN+ input Positive (noninverting) input of the difference amplifier.
4 IN- input Negative (inverting) input of the difference amplifier.
5 REF input Reference input; the output voltage is developed with respect to this pin, which is often tied to system ground in dual-supply operation or driven by a buffer for mid-supply level shifting in single-supply operation.
6 V+ power_in Positive supply; supply range VS = (V+) - (V-) is 1.7V to 5.5V single-supply, with a 0.1µF low-ESR ceramic bypass capacitor recommended close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Others
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset voltage, RTO VOSO -2.2 0.4 2.2 mV VS = 5.5V, TA = 25°C 9
Offset voltage over T, RTO VOSO -2.3 2.3 mV VS = 5.5V, TA = -40°C to 125°C 9
Offset temp drift, RTO -5.5 1.1 5.5 µV/°C VS = 5.5V, TA = -40°C to 125°C 9
Power-supply rejection ratio PSRR 40 130 µV/V VS = 1.7V to 5.5V, TA = 25°C 9
CMRR, high CMRR region, RTO CMRR DC 77.7 85 dB VCM = [5*(V-), 4*(VREF)] to [5*(V+), 4*(VREF), 3.5], VS = 5.5V, VREF = VMID 9
CMRR, rail-to-rail region, RTO CMRR DC 70 dB VCM = [5*(V-), 4*(VREF)] to [5*(V+), 4*(VREF)], VS = 5.5V, VREF = VMID 9
Gain error GE -0.1 0.003 0.1 % VREF = VMID, VO = (V-) + 0.1 V to (V+), 0.1V 9
Positive rail headroom VOH 15 25 mV RL = 10kΩ to VMID 9
Negative rail headroom VOL 15 20 mV RL = 10kΩ to VMID 9
Reference gain error REF - GE -0.02 0.002 0.02 % VS = 5.5V 10
Quiescent current IQ 14 19 µA VS = 5.5V 10
Quiescent current over temperature IQ 20 µA VS = 5.5V, TA = -40°C to 125°C 10
Quiescent current IQ 15 µA VS = 1.7V 10
Power-supply voltage, dual-supply VS -0.85 2.75 V Dual-supply, printed ±0.85 to ±2.75 10
Differential resistance RIN-DM 3360 kΩ 9
Common-mode resistance RIN-CM 1050 kΩ 9
Output voltage noise density at 1kHz eNI 150 nV/√Hz f = 1kHz 9
Output voltage noise density at 10kHz eNI 140 nV/√Hz f = 10kHz 9
Output voltage noise ENI 7.5 µVPP fB = 0.1Hz to 10Hz 9
Gain drift vs temperature 1 ppm/°C G = 0.5, TA = -40°C to 125°C 9
Load capacitance drive CL Drive 100 pF VO = 100mV step, Overshoot < 20% 9
Closed-loop output impedance ZO 180 Ω f = 10kHz 9
Short-circuit current ISC 30 mA VS = 5.5V, printed ±30 9
Bandwidth, -3dB BW 160 kHz VIN = 10mVpk-pk 9
Total harmonic distortion + noise THD + N 0.017 % VS = 5.5V, VCM = 2.75V, VO = 1VRMS, RL = 100kΩ, f = 1kHz, 80kHz measurement BW 9
EMI rejection ratio EMIRR 105 dB f = 1GHz, VIN_EMIRR = 100mV 9
Slew rate SR 0.19 V/µs VS = 5V, VO = 2V step 9
Settling time to 0.1%, 2V step tS 20 µs VS = 5.5V, VSTEP = 2V, CL = 10pF 9
Settling time to 0.01%, 2V step tS 32 µs VS = 5.5V, VSTEP = 2V, CL = 10pF 9
Settling time to 0.1%, 4V step tS 26 µs VS = 5.5V, VOUT_STEP = 4V, CL = 10pF 9
Settling time to 0.01%, 4V step tS 40 µs VS = 5.5V, VOUT_STEP = 4V, CL = 10pF 9
Overload recovery 23.2 µs VSTEP = VS / G 9
Reference gain to output REF - G 1 V/V 9
Supply voltage, single supply VS 6 V Single supply, VS = (V+), (V-) 4
Supply voltage, dual supply VS 3 V Dual supply, printed ±3 4
Signal input pins current -10 10 mA 4
Operating temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2500 2500 V Human-body model, ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -1500 1500 V Charged-device model, JESD22-C101 4
Supply voltage, single-supply VS 1.7 5.5 V Single-supply 4
Supply voltage, dual-supply VS -0.85 2.75 V Dual-supply, printed ±0.85 to ±2.75 4
Bypass capacitor on the power supply pins CBYP 0.1 µF Low-ESR ceramic between each supply pin and ground 4
Specified temperature -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 195.9 °C/W DBV (SOT-23), 6 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 115.5 °C/W DBV (SOT-23), 6 pins 4
Junction-to-board thermal resistance RθJB 77.1 °C/W DBV (SOT-23), 6 pins 4
Junction-to-top characterization parameter ψJT 52.2 °C/W DBV (SOT-23), 6 pins 4
Junction-to-board characterization parameter ψJB 76.8 °C/W DBV (SOT-23), 6 pins 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: INA500CIDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina500cidbvr-etched.step / ina500cidbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina500cidbvr.step / ina500cidbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (51 pp, sha256 c1a221a1c38b5798, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF