main
History Download
Ray ina4181a1ipwr: specified limits as data (metadata.characteristics, 29 rows from the datasheet) 984e89a

INA4181A1IPWR

Texas Instruments · Current Sense Amplifiers · TSSOP-20

INA4181A1IPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF1 input Channel 1 reference voltage input, accepts 0 to VS.
2 OUT1 output Channel 1 output voltage.
3 IN-1 input Channel 1 negative differential input for current sensing resistor.
4 IN+1 input Channel 1 positive differential input for current sensing resistor.
5 VS power_in Supply voltage, 2.7V to 5.5V.
6 IN+2 input Channel 2 positive differential input for current sensing resistor.
7 IN-2 input Channel 2 negative differential input for current sensing resistor.
8 OUT2 output Channel 2 output voltage.
9 REF2 input Channel 2 reference voltage input, accepts 0 to VS.
10 NC unconnected No internal connection, may be left floating or connected to any voltage between VS and GND.
11 NC unconnected No internal connection, may be left floating or connected to any voltage between VS and GND.
12 REF3 input Channel 3 reference voltage input, accepts 0 to VS.
13 OUT3 output Channel 3 output voltage.
14 IN-3 input Channel 3 negative differential input for current sensing resistor.
15 IN+3 input Channel 3 positive differential input for current sensing resistor.
16 GND power_in Ground.
17 IN+4 input Channel 4 positive differential input for current sensing resistor.
18 IN-4 input Channel 4 negative differential input for current sensing resistor.
19 OUT4 output Channel 4 output voltage.
20 REF4 input Channel 4 reference voltage input, accepts 0 to VS.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Amplifiers/Comparators
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode rejection ratio, RTI CMRR 84 100 dB VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to +125°C 8
Input offset voltage, RTI VOS -150 25 150 μV VSENSE = 0mV, VIN+ = 0V 8
Input offset voltage, RTI VOS -500 100 500 μV VSENSE = 0mV 8
Offset voltage drift, RTI dVOS/dT 0.2 1 μV/°C VSENSE = 0mV, TA = -40°C to +125°C 8
Power-supply rejection ratio, RTI PSRR -40 8 40 μV/V VS = 2.7V to 5.5V, VIN+ = 12V, VSENSE = 0mV 8
Input bias current IIB -6 μA VSENSE = 0mV, VIN+ = 0V 8
Input bias current IIB 75 μA VSENSE = 0mV 8
Input offset current IIO -0.05 0.05 μA VSENSE = 0mV 8
Gain error EG -1 0.1 1 % VOUT = 0.5V to VS - 0.5V, TA = -40°C to +125°C 8
Gain error vs temperature 1.5 20 ppm/°C TA = -40°C to +125°C 8
Nonlinearity error -0.01 0.01 % VOUT = 0.5V to VS - 0.5V 8
Maximum capacitive load 1 nF No sustained oscillation 8
Quiescent current, INA4181 (quad) IQ 690 900 μA VSENSE = 0mV 8
Quiescent current, INA4181 (quad), over temperature IQ 1000 μA VSENSE = 0mV, TA = -40°C to +125°C 8
Common-mode input voltage (IN+ and IN-) VCM -0.2 12 26 V 7
Operating supply voltage VS 2.7 5 5.5 V 7
Operating temperature range, natural convection TA -40 125 °C Natural-air ventilation 7
Supply voltage VS 6 V 7
Differential input voltage (VIN+)-(VIN-) (VIN+)-(VIN-) -26 26 V 7
Common-mode voltage (IN+, IN-) 26 V Lower limit printed as GND - 0.3 V (not numeric) 7
Maximum output current IOUT 8 mA 7
Operating temperature range, natural convection TA -55 150 °C Natural-air ventilation 7
Junction temperature TJ 150 °C 7
Storage temperature Tstg -65 150 °C 7
Junction-to-ambient thermal resistance (PW, TSSOP) RθJA 97 °C/W 7
Junction-to-case (top) thermal resistance (PW, TSSOP) RθJC(top) 37.7 °C/W 7
Junction-to-board thermal resistance (PW, TSSOP) RθJB 48.3 °C/W 7
Junction-to-top characterization parameter (PW, TSSOP) ψJT 3.6 °C/W 7
Junction-to-board characterization parameter (PW, TSSOP) ψJB 47.9 °C/W 7

CAD (KiCad official)

  • Symbol: INA4181A1IPWR
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: ina4181a1ipwr-etched.step / ina4181a1ipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina4181a1ipwr.step / ina4181a1ipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (62 pp, sha256 16077f586e92eff4, retrieved 2026-09-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF