Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA350ABSIDDFR

Texas Instruments · Instrumentation Amplifiers · TSOT-23-8

INA350ABSIDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GS input Gain select input; logic low selects G=10 for INA350ABS, logic high or no connect selects G=20.
2 IN- input Negative (inverting) input; accepts differential signal for measurement.
3 IN+ input Positive (non-inverting) input; accepts differential signal for measurement.
4 V- power_in Negative supply voltage; ground reference in single-supply or negative rail in dual-supply (1.8 V to 5.5 V total span).
5 REF input Reference input that sets output common-mode voltage; must be driven by low-impedance source (<5 Ω recommended).
6 OUT output Instrumentation amplifier output; can drive 500 pF load with <20% overshoot.
7 V+ power_in Positive supply voltage; supplies power to device (1.8 V to 5.5 V total span).
8 SHDN input Shutdown control input; logic high enables device, logic low disables, or no connect enables device.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, single-supply VS 1.8 5.5 V Single-supply 6
Supply voltage, dual-supply (magnitude per rail) VS 0.9 2.75 V Dual-supply 6
Specified temperature -40 125 °C 6
Supply voltage, VS = (V+) – (V–) VS 0 6 V 6
Signal input pins current -10 10 mA 6
Operating temperature TA -55 150 °C 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Offset voltage, RTI VOSI -1.2 0.2 1.2 mV VS = 5.5 V, TA = 25°C 7
Offset voltage over temperature, RTI VOSI -1.3 1.3 mV VS = 5.5 V, TA = –40°C to 125°C 7
Power-supply rejection ratio PSRR 20 75 µV/V TA = 25°C 7
Common-mode rejection ratio, RTI, high CMRR region CMRR DC 85 95 dB VCM = (V–) + 0.1 V to (V+) – 1 V, VS = 5.5 V, VREF = VS/2 7
Common-mode rejection ratio, RTI, full input range CMRR DC 62 75 dB VCM = (V–) + 0.1 V to (V+) – 0.1 V, VS = 5.5 V, VREF = VS/2 7
Gain error, G = 10 GE -0.5 0.05 0.5 % G = 10, VREF = VS/2, VO = (V–) + 0.1 V to (V+) – 0.1V 7
Gain error, G = 20 GE -0.6 0.06 0.6 % G = 20, VREF = VS/2, VO = (V–) + 0.1 V to (V+) – 0.1V 7
Positive rail headroom VOH 15 30 mV RL = 10 kΩ to VS/2 7
Negative rail headroom VOL 15 30 mV RL = 10 kΩ to VS/2 7
Short-circuit current ISC -20 20 mA VS = 5.5 V 7
Quiescent current IQ 100 125 µA VIN = 0 V 8
Quiescent current over temperature IQ 135 µA TA = –40°C to 125°C 8
Quiescent current per amplifier, shutdown IQSD 0.7 1.25 µA All amplifiers disabled, SHDN = V– 8
Junction-to-ambient thermal resistance, DDF (SOT-23-THN) 8-pin RθJA 169.1 °C/W DDF (SOT-23-THN), 8 pins 6
Junction-to-case (top) thermal resistance, DDF (SOT-23-THN) 8-pin RθJC(top) 101.7 °C/W DDF (SOT-23-THN), 8 pins 6
Junction-to-board thermal resistance, DDF (SOT-23-THN) 8-pin RθJB 84.8 °C/W DDF (SOT-23-THN), 8 pins 6
Junction-to-top characterization parameter, DDF (SOT-23-THN) 8-pin ψJT 12.6 °C/W DDF (SOT-23-THN), 8 pins 6
Junction-to-board characterization parameter, DDF (SOT-23-THN) 8-pin ψJB 84.3 °C/W DDF (SOT-23-THN), 8 pins 6

CAD (KiCad official)

  • Symbol: INA350ABSIDDFR
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: ina350absiddfr-etched.step / ina350absiddfr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina350absiddfr.step / ina350absiddfr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 6f5ed4ebfc2ccb98, retrieved 2026-09-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF