INA333AIDGKR

{
 "schema": "adom.pads/1",
 "slug": "ina333aidgkr",
 "footprint": "MSOP-8_3x3mm_P0.65mm",
 "generated_from": {
  "footprint": "MSOP-8_3x3mm_P0.65mm@sha256:c85207be7edf4b5e",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.1125,
   -0.975
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "MSOP-8_3x3mm_P0.65mm@sha256:c85207be7edf4b5e"
 },
 "pad_count": 8,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "RG",
   "type": "passive",
   "description": "Gain-setting resistor terminal 1. Connect an external resistor RG between pins 1 and 8 to set gain: G = 1 + (100kΩ / RG). Leave open for unity gain.",
   "is_pin1": true,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "VIN-",
   "type": "input",
   "description": "Inverting analog input. Input voltage range extends from (V-)+0.1V to (V+)-0.1V; input bias current typ ±70pA, max ±200pA. Includes internal RFI-filtered input network.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "VIN+",
   "type": "input",
   "description": "Non-inverting analog input. Input voltage range extends from (V-)+0.1V to (V+)-0.1V; input bias current typ ±70pA, max ±200pA. Includes internal RFI-filtered input network.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "V-",
   "type": "power_in",
   "description": "Negative power supply. Single-supply range 1.8V to 5.5V referenced to V+; dual-supply range ±0.9V to ±2.75V. Absolute max supply (V+ − V−) = 7V.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "REF",
   "type": "input",
   "description": "Reference input; sets the output offset (VOUT is referenced to this pin). Voltage range V- to V+; input resistance RIN ≈ 300kΩ. Drive from a low-impedance source to preserve CMRR.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "VOUT",
   "type": "output",
   "description": "Amplifier output. Rail-to-rail: swings within ~50mV of the supply rails at RL=10kΩ. Short-circuit current −40/+5mA (continuous to common). Drives capacitive loads up to 500pF.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "V+",
   "type": "power_in",
   "description": "Positive power supply. Single-supply range 1.8V to 5.5V; dual-supply range ±0.9V to ±2.75V. Quiescent current typ 50µA (max 80µA). Bypass with 0.1µF close to the pin.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "RG",
   "type": "passive",
   "description": "Gain-setting resistor terminal 2. Connect an external resistor RG between pins 1 and 8 to set gain: G = 1 + (100kΩ / RG). Leave open for unity gain.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}