main
Ray
Publish 0.1.0
63b6b46
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253
{
"slug": "ina321ea-2k5",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Instrumentation Amplifiers, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"amplifiers-comparators",
"ina321ea",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ina321ea-2k5.kicad_sym",
"ina321ea-2k5.kicad_mod",
"ina321ea-2k5.glb",
"ina321ea-2k5.step",
"ina321ea-2k5.lbr",
"docs/hero.png",
"docs/ina321ea-2k5-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ina321ea-2k5-hero.glb",
"ina321ea-2k5-hero.overlay.json",
"ina321ea-2k5-etched.glb"
],
"component": {
"mpn": "INA321EA/2K5",
"manufacturer": "Texas Instruments",
"package": "VSSOP-8",
"pin_count": 8,
"category": "Amplifiers/Comparators",
"subcategory": "Instrumentation Amplifiers",
"datasheet": "https://www.ti.com/lit/ds/symlink/ina321.pdf",
"parts": {
"symbol": "ina321ea-2k5.kicad_sym",
"footprint": "ina321ea-2k5.kicad_mod",
"model_3d": "ina321ea-2k5-hero.glb",
"model_3d_plain": "ina321ea-2k5-etched.glb",
"model_3d_step": "ina321ea-2k5-etched.step",
"model_3d_step_plain": "ina321ea-2k5.step",
"lbr": "ina321ea-2k5.lbr"
},
"distributor_links": {
"lcsc": "C2865065"
},
"distributor_check": {
"checked_at": "2026-11-10T19:01:56Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "deferred",
"error": "shared DigiKey quota guard: 313 calls left today"
},
"mouser": {
"pn": null,
"status": "quota"
}
},
"pins": [
{
"number": "1",
"name": "RG",
"type": "passive",
"description": "Gain-set terminal: the external resistor network between pins 1, 5 and 6 sets the gain as G = 5 + 5(R2/R1), with gain error from external resistors adding directly to the device error."
},
{
"number": "2",
"name": "VIN−",
"type": "power_in",
"description": "Inverting differential input; with VS = 5 V the common-mode range is 0.55 V to 3.8 V, and input signals more than 0.5 V beyond the supply rails should be limited to 10 mA."
},
{
"number": "3",
"name": "VIN+",
"type": "power_in",
"description": "Non-inverting differential input; with VS = 5 V the common-mode range is 0.55 V to 3.8 V, and input current should be limited to 10 mA if signals exceed the supply rails by more than 0.5 V."
},
{
"number": "4",
"name": "V−",
"type": "power_in",
"description": "Negative power supply terminal; the device is specified for a total supply V+ to V− of +2.7 V to +5.5 V, and operation may be single-supply with V− at ground."
},
{
"number": "5",
"name": "REF",
"type": "input",
"description": "Reference terminal that defines the zero output level; it must be at least 1.2 V below the positive supply rail and needs a low-impedance connection, since 160 Ω in series degrades CMRR to 80 dB."
},
{
"number": "6",
"name": "VOUT",
"type": "output",
"description": "Amplifier output, referred to the REF pin; it is optimized for load impedances of 10 kΩ or greater and swings rail-to-rail for gains of 10 or more."
},
{
"number": "7",
"name": "V+",
"type": "power_in",
"description": "Positive power supply terminal; the device is specified from +2.7 V to +5.5 V and should be decoupled with 0.1 µF capacitors as close to the device as possible."
},
{
"number": "8",
"name": "Shutdown",
"type": "input",
"description": "Shutdown control normally tied to V+; pulling it below 0.8 V on a 5 V supply puts the amplifier into sleep mode (under 1 µA quiescent current) with high output impedance."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The pin configuration drawing's text layer is scrambled. Pin numbers were mapped from the label orde; The datasheet names the package MSOP-8 (E, EA), while the package addendum and tape-and-reel tables ; The datasheet does not give a pin-level type for RG beyond its gain-setting role, so it is typed pas"
],
"pages_sent": 25,
"cost_usd": 0.0173,
"at": "2026-11-10T19:01:43"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/ina321.pdf",
"pages": 25,
"sha256": "2363d452254a2876",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "HVSSOP",
"height_mm": 1.1,
"height_basis": "datasheet A, max",
"standoff_mm": 0.1,
"standoff_basis": "family nominal (no datasheet A1 read)",
"lead_width_mm": 0.292,
"lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.65 mm; a tab 0.9 x its width (no datasheet b read)",
"lead_thickness_mm": 0.128,
"lead_thickness_basis": "default for pitch 0.65 mm, height 1.1 mm (no datasheet c read)"
},
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ina321ea-2k5.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
1.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9448939ca1d4f9b9ae73a6d615acbde7a5b30a7abb8cc4c782c39e284db5869d",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ina321ea-2k5-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
1.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "4be554a9d6571ab4b52ae7f243b424a675935153691ba74fa51b5e722dc1e628",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DGK0008A",
"source_page": 19,
"D": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
2.9,
3.1
]
},
"E": {
"nom_mm": 4.9,
"range_mm": [
4.75,
5.05
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.1,
"range_mm": [
null,
1.1
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ina321ea-2k5.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}