main
History Download
Ray Publish 0.1.0 cdd9be7

INA310B3IDGKR

Texas Instruments · Current Sense Amplifiers · VSSOP-8

INA310B3IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VS power_in Power supply input, specified from 2.7 V to 20 V.
2 OUT output Output voltage of the current-sense amplifier.
3 CMPIN input Comparator input, which is compared against the internal 0.6-V threshold to drive CMPOUT.
4 GND power_in Ground reference pin.
5 RESET input Comparator reset pin, active low: Low selects transparent mode and High selects latch mode.
6 CMPOUT output Comparator output, which latches high when RESET is High.
7 IN- input Shunt resistor negative sense input; connect to the load side of the sense resistor for high-side use and to the ground side for low-side use.
8 IN+ input Shunt resistor positive sense input; connect to the bus-voltage side of the sense resistor for high-side use and to the load side for low-side use.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input range VCM -4 110 V TA = -40°C to +125°C 5
Common-mode rejection ratio (INA310Bx) CMRR 120 140 dB INA310Bx, VIN+ = -4 V to 110 V, TA = -40°C to +125°C 5
Offset voltage, RTI (INA310B3) VOS -250 30 250 µV INA310B3 5
Offset drift, RTI (INA310Bx) dVOS/dT -1 0.1 1 µV/°C TA = -40°C to +125°C, INA310Bx 5
Power-supply rejection ratio, RTI (INA310Bx) PSRR -10 1.5 10 µV/V 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C 5
Input bias current IB 10 20 30 µA IB+, IB-, VSENSE = 0 mV 5
Gain error (INA310Bx) GERR -0.5 0.07 0.5 % GND + 50 mV ≤ VOUT ≤ VS, 200 mV 5
Gain error drift (INA310Bx) GERR drift 2 20 ppm/°C TA = -40°C to +125°C, INA310Bx 5
Maximum capacitive load 500 pF No sustained oscillation, no isolation resistor 5
Alert threshold (25°C) VTHRESHOLD 585 600 615 mV TA = 25°C 6
Alert threshold (full temperature) VTHRESHOLD 580 620 mV TA = -40°C to +125°C 6
Input bias current, CMPIN (25°C) IBCMPIN -20 1 20 nA TA = 25°C, VCMPIN = 0.4 V to 1.2 V 6
Input bias current, CMPIN (full temperature) IBCMPIN 250 nA TA = -40°C to +125°C, VCMPIN = 0.4 V to 1.2 V 6
High-level leakage current ILKG 1 µA VCMPout = VS 6
Low-level output voltage (25°C) VOL 300 mV IOL = 2.35 mA 6
Low-level output voltage (full temperature) VOL 350 mV TA = -40°C to +125°C, IOL = 2.35 mA 6
RESET high-level input voltage threshold VIH 1.2 V TA = -40°C to +125°C 6
RESET low-level input voltage threshold VIL 0.4 V TA = -40°C to +125°C 6
Supply voltage range VS 2.7 20 V TA = -40°C to +125°C 6
Quiescent current IQ 1.6 2 mA 6
Quiescent current (full temperature) IQ 2.25 mA TA = -40°C to +125°C 6
Common-mode input voltage (recommended) VCM -4 48 110 V Over operating free-air temperature range 4
Operating supply voltage VS 2.7 5 20 V Over operating free-air temperature range 4
Operating free-air temperature TA -40 125 °C Over operating free-air temperature range 4
Supply voltage VS -0.3 22 V 4
Differential analog input (VIN+), (VIN-) -12 12 V Differential (VIN+), (VIN-) 4
Analog inputs with respect to GND VIN+, VIN- -20 120 V VIN+, VIN-, with respect to GND 4
Input current into any pin 5 mA 4
Operating temperature TA -55 150 °C Operating free-air temperature range 4
Junction temperature TJ -65 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 172.2 °C/W DGK (VSSOP) 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 63.5 °C/W DGK (VSSOP) 8 pins 4
Junction-to-board thermal resistance RθJB 93.8 °C/W DGK (VSSOP) 8 pins 4
Junction-to-top characterization parameter ΨJT 9.8 °C/W DGK (VSSOP) 8 pins 4
Junction-to-board characterization parameter ΨJB 92.2 °C/W DGK (VSSOP) 8 pins 4

CAD (KiCad official)

  • Symbol: INA310B3IDGKR
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina310b3idgkr-etched.step / ina310b3idgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina310b3idgkr.step / ina310b3idgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 3e33543dd9085674, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF