main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ina310a5idgkr: viewers rendered from the public page · Ray
ina310a5idgkr-etched.glb Publish 0.1.0 · Ray
ina310a5idgkr-etched.step ina310a5idgkr: factory component page (tier=mfr) · Ray
ina310a5idgkr-hero.glb ina310a5idgkr: hero GLB from the etched model (keeps the MPN mark) · Ray
ina310a5idgkr-hero.overlay.json Publish 0.1.0 · Ray
ina310a5idgkr.glb Publish 0.1.0 · Ray
ina310a5idgkr.kicad_mod Publish 0.1.0 · Ray
ina310a5idgkr.kicad_sym Publish 0.1.0 · Ray
ina310a5idgkr.lbr Publish 0.1.0 · Ray
ina310a5idgkr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

INA310A5IDGKR

Texas Instruments · Current Sense Amplifiers · VSSOP-8

INA310A5IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VS power_in Power supply input, 2.7 V to 20 V (operating supply range per Recommended Operating Conditions); bypass capacitor should be placed close to this pin.
2 OUT output Amplifier output voltage, scaled by the device gain (500 V/V for INA310A5) and limited to roughly GND + 20 mV to VS - 150 mV at the stated load.
3 CMPIN input Comparator input, compared against the internal 0.6 V threshold (typical 8 mV hysteresis); the datasheet limits it to 0 V up to 5.5 V or VS if VS is lower than 5.5 V.
4 GND power_in Ground reference for the device.
5 RESET input Comparator reset pin: Low (or open) selects transparent mode and High selects latch mode, with an internal 2 MΩ typical pull-down and an allowed range of 0 V to the supply voltage.
6 CMPOUT output Open-drain comparator output that can be pulled up to 0 V to 20 V independent of VS, and stays latched high when RESET is High.
7 IN- input Shunt resistor negative sense input; connect to the load side of the sense resistor for high-side sensing or to the ground side for low-side sensing.
8 IN+ input Shunt resistor positive sense input; connect to the bus-voltage side of the sense resistor for high-side sensing or to the load side for low-side sensing.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input range VCM -4 110 V TA = -40°C to +125°C 5
Common-mode rejection ratio (DC) CMRR 140 160 dB INA310Ax, VIN+ = -4 V to 110 V, TA = -40°C to +125°C 5
Offset voltage, RTI VOS -20 2 20 µV 5
Offset drift, RTI (A4, A5) dVOS/dT -0.25 0.025 0.25 µV/°C TA = -40°C to +125°C, INA310A4, INA310A5 5
Power-supply rejection ratio, RTI (A4, A5) PSRR -1 0.1 1 µV/V INA310A4, INA310A5, 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C 5
Input bias current IB 10 20 30 µA IB+, IB-, VSENSE = 0 mV 5
Gain error (Version A) GERR -0.15 0.02 0.15 % INA310Ax, GND + 50 mV ≤ VOUT ≤ VS, 200 mV 5
Gain error drift (Version A) 1 10 ppm/°C INA310Ax, TA = -40°C to +125°C 5
Nonlinearity error NLERR -0.01 0.01 % GND + 50 mV ≤ VOUT ≤ VS, 200 mV 5
Maximum capacitive load 500 pF No sustained oscillation, no isolation resistor 5
Comparator alert threshold VTHRESHOLD 585 600 615 mV TA = 25°C 6
Comparator alert threshold over temperature VTHRESHOLD 580 620 mV TA = -40°C to +125°C 6
Comparator input bias current IBCMPIN -20 1 20 nA TA = 25°C, VCMPIN = 0.4 V to 1.2 V 6
Comparator input bias current over temperature IBCMPIN 250 nA TA = -40°C to +125°C, VCMPIN = 0.4 V to 1.2 V 6
High-level leakage current ILKG 1 µA VCMPout = VS 6
Low-level output voltage VOL 300 mV IOL = 2.35 mA 6
Low-level output voltage over temperature VOL 350 mV TA = -40°C to +125°C, IOL = 2.35 mA 6
RESET high-level input voltage threshold VIH 1.2 V TA = -40°C to +125°C 6
RESET low-level input voltage threshold VIL 0.4 V TA = -40°C to +125°C 6
Minimum RESET pulse width 100 200 ns TA = -40°C to +125°C 6
Supply voltage range VS 2.7 20 V TA = -40°C to +125°C 6
Quiescent current IQ 1.6 2 mA 6
Quiescent current over temperature IQ 2.25 mA TA = -40°C to +125°C 6
Supply voltage VS -0.3 22 V 4
Differential analog input voltage VIN+, VIN- -12 12 V Differential (VIN+), (VIN-) 4
Analog input voltage with respect to GND VIN+, VIN- -20 120 V With respect to GND 4
Comparator output voltage 22 V Comparator Output 4
Input current into any pin 5 mA 4
Operating temperature (absolute maximum) TA -55 150 °C 4
Junction temperature TJ -65 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input voltage VCM -4 48 110 V 4
Operating supply voltage VS 2.7 5 20 V 4
Differential sense input range VSENSE 0 V 4
Operating free-air temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 172.2 °C/W DGK (VSSOP), 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 63.5 °C/W DGK (VSSOP), 8 pins 4
Junction-to-board thermal resistance RθJB 93.8 °C/W DGK (VSSOP), 8 pins 4
Junction-to-top characterization parameter ΨJT 9.8 °C/W DGK (VSSOP), 8 pins 4
Junction-to-board characterization parameter ΨJB 92.2 °C/W DGK (VSSOP), 8 pins 4

CAD (KiCad official)

  • Symbol: INA310A5IDGKR
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina310a5idgkr-etched.step / ina310a5idgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina310a5idgkr.step / ina310a5idgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 3e33543dd9085674, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF