INA303A3QPWRQ1

{
  "slug": "ina303a3qpwrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Current Sense Amplifiers, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "ina303a3qpwrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ina303a3qpwrq1.kicad_sym",
    "ina303a3qpwrq1.kicad_mod",
    "ina303a3qpwrq1.glb",
    "ina303a3qpwrq1.step",
    "ina303a3qpwrq1.lbr",
    "docs/hero.png",
    "docs/ina303a3qpwrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ina303a3qpwrq1-hero.glb",
    "ina303a3qpwrq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "INA303A3QPWRQ1",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-14",
    "pin_count": 14,
    "category": "Amplifiers/Comparators",
    "subcategory": "Current Sense Amplifiers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ina302-q1",
    "parts": {
      "symbol": "ina303a3qpwrq1.kicad_sym",
      "footprint": "ina303a3qpwrq1.kicad_mod",
      "model_3d": "ina303a3qpwrq1-hero.glb",
      "model_3d_plain": "ina303a3qpwrq1.glb",
      "model_3d_step": "ina303a3qpwrq1-etched.step",
      "model_3d_step_plain": "ina303a3qpwrq1.step",
      "lbr": "ina303a3qpwrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2155701",
      "digikey": "296-53538-2-ND",
      "mouser": "595-INA303A3QPWRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T07:16:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-53538-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-INA303A3QPWRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VS",
        "type": "power_in",
        "description": "Analog power supply with a recommended operating range of 2.7 V to 5.5 V (5 V nominal), and an absolute maximum of 6 V."
      },
      {
        "number": "2",
        "name": "OUT",
        "type": "output",
        "description": "Analog output that carries the output voltage; absolute limits are GND - 0.3 V to (VS) + 0.3 V."
      },
      {
        "number": "3",
        "name": "LIMIT1",
        "type": "input",
        "description": "Analog threshold limit input for ALERT1, set with external resistors as described in the Setting Alert Thresholds section; absolute limits are GND - 0.3 V to (VS) + 0.3 V."
      },
      {
        "number": "4",
        "name": "REF",
        "type": "input",
        "description": "Analog reference voltage input that must be between 0 V and VS; absolute limits are GND - 0.3 V to (VS) + 0.3 V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground reference for the device."
      },
      {
        "number": "6",
        "name": "LATCH1",
        "type": "input",
        "description": "Digital input selecting transparent or latch mode for ALERT1; absolute limits are GND - 0.3 V to (VS) + 0.3 V."
      },
      {
        "number": "7",
        "name": "LATCH2",
        "type": "input",
        "description": "Digital input selecting transparent or latch mode for ALERT2; absolute limits are GND - 0.3 V to (VS) + 0.3 V."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "9",
        "name": "LIMIT2",
        "type": "input",
        "description": "Analog threshold limit input for ALERT2, set as described in the Setting Alert Thresholds section; absolute limits are GND - 0.3 V to (VS) + 0.3 V."
      },
      {
        "number": "10",
        "name": "DELAY",
        "type": "input",
        "description": "Analog delay timing input that sets the delayed alert response for comparator 2 (2 µs to 10 s per the datasheet); absolute limits are GND - 0.3 V to (VS) + 0.3 V."
      },
      {
        "number": "11",
        "name": "ALERT2",
        "type": "output",
        "description": "Open-drain, active-low alert output that is an underlimit alert for the INA303-Q1 (window comparator); absolute maximum is GND - 0.3 V to 6 V."
      },
      {
        "number": "12",
        "name": "ALERT1",
        "type": "output",
        "description": "Open-drain, active-low overlimit alert output; absolute maximum is GND - 0.3 V to 6 V."
      },
      {
        "number": "13",
        "name": "IN-",
        "type": "input",
        "description": "Connect to the load side of the current-sensing resistor; recommended common-mode range is -0.1 V to 36 V and the absolute common-mode limit is GND - 0.3 V to 40 V."
      },
      {
        "number": "14",
        "name": "IN+",
        "type": "input",
        "description": "Connect to the supply side of the current-sensing resistor; recommended common-mode range is -0.1 V to 36 V and the absolute common-mode limit is GND - 0.3 V to 40 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pinout is taken from the shared INA302-Q1/INA303-Q1 PW (TSSOP-14) pin table. The package addendu; Pin type mapping: the datasheet calls the ALERT outputs open-drain. The KiCad type set has no open-d; The ALERT2 function depends on the device: an overlimit alert on INA302-Q1 and an underlimit alert o"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0439,
        "at": "2026-10-11T07:15:47"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ina302-q1",
        "pages": 40,
        "sha256": "9d26f5e6ff86755e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ina303a3qpwrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.0
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ina303a3qpwrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.0
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0b848ce077f338f1db2083e410b144db514c5c297413185d04fa5db0d1c7a5b8",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}