main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina300aidsqt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina300aidsqt: viewers · Ray
ina300aidsqt-etched.fit.json ina300aidsqt: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina300aidsqt-etched.glb ina300aidsqt: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina300aidsqt-etched.step ina300aidsqt: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
ina300aidsqt-hero.glb ina300aidsqt: hero from the plain model · Ray
ina300aidsqt-hero.overlay.json ina300aidsqt: hero from the plain model · Ray
ina300aidsqt.glb Publish 0.1.0 · Ray
ina300aidsqt.kicad_mod Publish 0.1.0 · Ray
ina300aidsqt.kicad_sym Publish 0.1.0 · Ray
ina300aidsqt.lbr Publish 0.1.0 · Ray
ina300aidsqt.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/ina300aidsqt · Ray

INA300AIDSQT

Texas Instruments · Supervisor And Reset ICs · WSON-10-EP(2x2)

INA300AIDSQT from Texas Instruments, in a WSON-10-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Analog input; connect to supply side of shunt resistor for differential voltage measurement in 0V to 36V common-mode range.
2 IN- input Analog input; connect to load side of shunt resistor for differential voltage measurement in 0V to 36V common-mode range.
3 LIMIT input Analog input; alert threshold limit input with programmable range 0mV to 250mV using external resistor.
4 ENABLE input Digital input; enable or disable selection input for device operation.
5 ALERT tri_state Digital output; overlimit alert active-low open-drain output with selectable response time 10µs, 50µs, or 100µs.
6 LATCH input Digital input; transparent or latch mode selection input for alert output behavior configuration.
7 DELAY input Digital input; response time selection input for alert response time 10µs, 50µs, or 100µs.
8 GND power_in Analog ground reference for device and external circuitry.
9 VS power_in Analog power supply input, 2.7V to 5.5V operating supply voltage.
10 HYS input Digital input; hysteresis setting input for selectable hysteresis options 2mV, 4mV, or 8mV.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(2x2)
Category Power Management (PMIC)
Pins 11

CAD (KiCad official)

  • Symbol: INA300AIDSQT
  • Footprint: Package_DFN_QFN:Texas_DSQ0010A_WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm
  • 3D model: WSON-10-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: ina300aidsqt-etched.step / ina300aidsqt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina300aidsqt.step / ina300aidsqt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 223b3de044bfa2a1, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF