← Commit history

Initial commit: component/ina300aidsqt

Ray ·f1c3b2e244 ·
2 files changed +226
README.mdadded+48
@@ -0,0 +1,48 @@+# INA300AIDSQT++**Texas Instruments** · Supervisor And Reset ICs · WSON-10-EP(2x2)++INA300AIDSQT from Texas Instruments, in a WSON-10-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN+ | input | Analog input; connect to supply side of shunt resistor for differential voltage measurement in 0V to 36V common-mode range. |+| 2 | IN- | input | Analog input; connect to load side of shunt resistor for differential voltage measurement in 0V to 36V common-mode range. |+| 3 | LIMIT | input | Analog input; alert threshold limit input with programmable range 0mV to 250mV using external resistor. |+| 4 | ENABLE | input | Digital input; enable or disable selection input for device operation. |+| 5 | ALERT | tri_state | Digital output; overlimit alert active-low open-drain output with selectable response time 10µs, 50µs, or 100µs. |+| 6 | LATCH | input | Digital input; transparent or latch mode selection input for alert output behavior configuration. |+| 7 | DELAY | input | Digital input; response time selection input for alert response time 10µs, 50µs, or 100µs. |+| 8 | GND | power_in | Analog ground reference for device and external circuitry. |+| 9 | VS | power_in | Analog power supply input, 2.7V to 5.5V operating supply voltage. |+| 10 | HYS | input | Digital input; hysteresis setting input for selectable hysteresis options 2mV, 4mV, or 8mV. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-10-EP(2x2) |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `INA300AIDSQT`+- Footprint: `Package_DFN_QFN:Texas_DSQ0010A_WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm`+- 3D model: WSON-10-EP(2x2) (KiCad packages3D, STEP)+- 3D model files: `ina300aidsqt-etched.step` / `ina300aidsqt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina300aidsqt.step` / `ina300aidsqt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina300) (44 pp, sha256 `223b3de044bfa2a1`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina300aidsqt-datasheet.pdf)
page.jsonadded+178
@@ -0,0 +1,178 @@+{+  "slug": "ina300aidsqt",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Supervisor And Reset ICs, WSON-10-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "ina300aidsqt",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ina300aidsqt.kicad_sym",+    "ina300aidsqt.kicad_mod",+    "ina300aidsqt.glb",+    "ina300aidsqt.step",+    "ina300aidsqt.lbr",+    "docs/hero.png",+    "docs/ina300aidsqt-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "INA300AIDSQT",+    "manufacturer": "Texas Instruments",+    "package": "WSON-10-EP(2x2)",+    "pin_count": 11,+    "category": "Power Management (PMIC)",+    "subcategory": "Supervisor And Reset ICs",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ina300",+    "parts": {+      "symbol": "ina300aidsqt.kicad_sym",+      "footprint": "ina300aidsqt.kicad_mod",+      "model_3d": "ina300aidsqt-etched.glb",+      "model_3d_plain": "ina300aidsqt.glb",+      "model_3d_step": "ina300aidsqt-etched.step",+      "model_3d_step_plain": "ina300aidsqt.step",+      "lbr": "ina300aidsqt.lbr"+    },+    "distributor_links": {+      "lcsc": "C133581",+      "digikey": "296-37474-2-ND",+      "mouser": "595-INA300AIDSQT"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T01:04:58Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-37474-2-ND",+        "status": "found",+        "lifecycle": "Obsolete"+      },+      "mouser": {+        "pn": "595-INA300AIDSQT",+        "status": "found",+        "lifecycle": "End of Life"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "IN+",+        "type": "input",+        "description": "Analog input; connect to supply side of shunt resistor for differential voltage measurement in 0V to 36V common-mode range."+      },+      {+        "number": "2",+        "name": "IN–",+        "type": "input",+        "description": "Analog input; connect to load side of shunt resistor for differential voltage measurement in 0V to 36V common-mode range."+      },+      {+        "number": "3",+        "name": "LIMIT",+        "type": "input",+        "description": "Analog input; alert threshold limit input with programmable range 0mV to 250mV using external resistor."+      },+      {+        "number": "4",+        "name": "ENABLE",+        "type": "input",+        "description": "Digital input; enable or disable selection input for device operation."+      },+      {+        "number": "5",+        "name": "ALERT",+        "type": "tri_state",+        "description": "Digital output; overlimit alert active-low open-drain output with selectable response time 10µs, 50µs, or 100µs."+      },+      {+        "number": "6",+        "name": "LATCH",+        "type": "input",+        "description": "Digital input; transparent or latch mode selection input for alert output behavior configuration."+      },+      {+        "number": "7",+        "name": "DELAY",+        "type": "input",+        "description": "Digital input; response time selection input for alert response time 10µs, 50µs, or 100µs."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Analog ground reference for device and external circuitry."+      },+      {+        "number": "9",+        "name": "VS",+        "type": "power_in",+        "description": "Analog power supply input, 2.7V to 5.5V operating supply voltage."+      },+      {+        "number": "10",+        "name": "HYS",+        "type": "input",+        "description": "Digital input; hysteresis setting input for selectable hysteresis options 2mV, 4mV, or 8mV."+      },+      {+        "number": "11",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: MPN INA300AIDSQT suffix 'T' does not appear in package option addendum (page 34); closest active pro; Thermal pad (exposed pad, EP) is mentioned in pin table but has no numeric designation; not included",+          "exposed pad 11 added from the footprint"+        ],+        "pages_sent": 7,+        "cost_usd": 0.0732,+        "at": "2026-10-01T01:04:44"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ina300",+        "pages": 44,+        "sha256": "223b3de044bfa2a1",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file