main
Ray
Publish 0.1.0
6a17653
INA296A4QDGKRQ1
TI(德州仪器) · IC · VSSOP-8
INA296A4QDGKRQ1 from TI(德州仪器), in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Current-sense amplifier negative input; for high-side use connect to the load side of the sense resistor, and for low-side use connect to the ground side, with common-mode range −5V to 110V. |
| 2 | GND | power_in | Ground pin for the device. |
| 3 | REF2 | input | Reference 2 voltage input; connect to a potential from 0V to VS, as described in Adjusting the Output With the Reference Pins. |
| 4 | NC | unconnected | Reserved pin; connect to ground. |
| 5 | OUT | output | Output voltage; the output can range from as low as 20mV to as high as 200mV below the supply voltage. |
| 6 | VS | power_in | Power supply input, 2.7V to 20V (absolute maximum supply voltage 22V). |
| 7 | REF1 | input | Reference 1 voltage input; connect to a potential from 0V to VS, as described in Adjusting the Output With the Reference Pins. |
| 8 | IN+ | input | Current-sense amplifier positive input; for high-side use connect to the bus-voltage side of the sense resistor, and for low-side use connect to the load side, with common-mode range −5V to 110V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TI(德州仪器) |
| Package | VSSOP-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VS) | VS | 22 | V | 4 | |||
| Analog inputs differential voltage (VIN+) − (VIN−) | VIN+, VIN- | -30 | 30 | V | 4 | ||
| Analog inputs common-mode voltage | VIN+, VIN- | -20 | 120 | V | 4 | ||
| REF1, REF2, NC inputs voltage | REF1, REF2, NC | -0.3 | V | Printed maximum is VS + 0.3 V (supply-dependent, not numeric) | 4 | ||
| Output voltage | OUT | -0.3 | V | Printed maximum is VS + 0.3 V (supply-dependent, not numeric) | 4 | ||
| Operating temperature TA | TA | -55 | 150 | °C | 4 | ||
| Junction temperature TJ | TJ | 150 | °C | 4 | |||
| Storage temperature Tstg | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input range | VCM | -5 | 48 | 110 | V | 4 | |
| Operating supply range | VS | 2.7 | 5 | 20 | V | 4 | |
| Ambient temperature TA (Grade 1) | TA | -40 | 125 | °C | 4 | ||
| Common-mode rejection ratio, input-referred | CMRR | 150 | 166 | dB | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C, INA296A-Q1 | 5 | |
| Offset voltage, input-referred | Vos | -10 | 3 | 10 | µV | VSENSE = 0mV, INA296A3-Q1, INA296A4-Q1 | 5 |
| Offset voltage drift, input-referred | dVos/dT | -100 | 20 | 100 | nV/°C | TA = -40°C to 125°C, INA296A3-Q1, INA296A4-Q1, INA296A5-Q1 | 5 |
| Power-supply rejection ratio, input-referred | PSRR | -0.5 | 0.06 | 0.5 | µV/V | VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA296A3-Q1, INA296A4-Q1, INA296A5-Q1 | 5 |
| Input bias current | IB | 25 | 35 | 45 | µA | IB+, IB-, VSENSE=0mV | 5 |
| Reference input range | 0 | V | Printed maximum is VS (supply-dependent, not numeric) | 5 | |||
| Common-mode input range (electrical table) | VCM | -5 | 110 | V | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 | |
| Gain error | GERR | -0.015 | 0.003 | 0.015 | % | (GND + 50mV) < VOUT < (VS - 200mV), INA296A4-Q1, INA296A5-Q1 | 6 |
| Gain error drift | -2 | 0.1 | 2 | ppm/°C | TA = -40°C to +125°C, INA296A4-Q1, INA296A5-Q1 | 6 | |
| Swing to ground | 8 | 20 | mV | RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C | 6 | ||
| Reference voltage rejection ratio, input-referred | RVRR | -1.5 | 0.5 | 1.5 | µV/V | VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA296A2-Q1, INA296A3-Q1, INA296A4-Q1, INA296A5-Q1 | 6 |
| Reference divider accuracy | -0.01 | 0.002 | 0.01 | % | VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE = 0mV, VREF1 = VS, VREF2 = GND; VREF1 = GND, VREF2 = VS; TA = -40°C to +125°C, INA296A3-Q1, INA296A4-Q1, INA296A5-Q1 | 7 | |
| Supply voltage | VS | 2.7 | 20 | V | 7 | ||
| Quiescent current | IQ | 2.5 | 3 | mA | VSENSE = 0mV | 7 | |
| Quiescent current over temperature | IQ | 3.2 | mA | VSENSE = 0mV, TA = -40°C to +125°C | 7 | ||
| Specified ambient temperature range | TA | -40 | 125 | °C | 7 | ||
| Junction-to-ambient thermal resistance RθJA | RθJA | 167.2 | °C/W | DGK (VSSOP), 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance RθJC(top) | RθJC(top) | 58.9 | °C/W | DGK (VSSOP), 8 pins | 4 | ||
| Junction-to-board thermal resistance RθJB | RθJB | 88.9 | °C/W | DGK (VSSOP), 8 pins | 4 | ||
| Junction-to-top characterization parameter ΨJT | ΨJT | 8.1 | °C/W | DGK (VSSOP), 8 pins | 4 | ||
| Junction-to-board characterization parameter ΨJB | ΨJB | 87.4 | °C/W | DGK (VSSOP), 8 pins | 5 |
CAD (KiCad official)
- Symbol:
INA296A4QDGKRQ1 - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina296a4qdgkrq1-etched.step/ina296a4qdgkrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina296a4qdgkrq1.step/ina296a4qdgkrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TI(德州仪器) datasheet (49 pp, sha256
3de69b935de5298b, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA296A4QDGKRQ1
**TI(德州仪器)** · IC · VSSOP-8
INA296A4QDGKRQ1 from TI(德州仪器), in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Current-sense amplifier negative input; for high-side use connect to the load side of the sense resistor, and for low-side use connect to the ground side, with common-mode range −5V to 110V. |
| 2 | GND | power_in | Ground pin for the device. |
| 3 | REF2 | input | Reference 2 voltage input; connect to a potential from 0V to VS, as described in Adjusting the Output With the Reference Pins. |
| 4 | NC | unconnected | Reserved pin; connect to ground. |
| 5 | OUT | output | Output voltage; the output can range from as low as 20mV to as high as 200mV below the supply voltage. |
| 6 | VS | power_in | Power supply input, 2.7V to 20V (absolute maximum supply voltage 22V). |
| 7 | REF1 | input | Reference 1 voltage input; connect to a potential from 0V to VS, as described in Adjusting the Output With the Reference Pins. |
| 8 | IN+ | input | Current-sense amplifier positive input; for high-side use connect to the bus-voltage side of the sense resistor, and for low-side use connect to the load side, with common-mode range −5V to 110V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TI(德州仪器) |
| Package | VSSOP-8 |
| Category | |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VS) | VS | | | 22 | V | | 4 |
| Analog inputs differential voltage (VIN+) − (VIN−) | VIN+, VIN- | -30 | | 30 | V | | 4 |
| Analog inputs common-mode voltage | VIN+, VIN- | -20 | | 120 | V | | 4 |
| REF1, REF2, NC inputs voltage | REF1, REF2, NC | -0.3 | | | V | Printed maximum is VS + 0.3 V (supply-dependent, not numeric) | 4 |
| Output voltage | OUT | -0.3 | | | V | Printed maximum is VS + 0.3 V (supply-dependent, not numeric) | 4 |
| Operating temperature TA | TA | -55 | | 150 | °C | | 4 |
| Junction temperature TJ | TJ | | | 150 | °C | | 4 |
| Storage temperature Tstg | Tstg | -65 | | 150 | °C | | 4 |
| Common-mode input range | VCM | -5 | 48 | 110 | V | | 4 |
| Operating supply range | VS | 2.7 | 5 | 20 | V | | 4 |
| Ambient temperature TA (Grade 1) | TA | -40 | | 125 | °C | | 4 |
| Common-mode rejection ratio, input-referred | CMRR | 150 | 166 | | dB | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C, INA296A-Q1 | 5 |
| Offset voltage, input-referred | Vos | -10 | 3 | 10 | µV | VSENSE = 0mV, INA296A3-Q1, INA296A4-Q1 | 5 |
| Offset voltage drift, input-referred | dVos/dT | -100 | 20 | 100 | nV/°C | TA = -40°C to 125°C, INA296A3-Q1, INA296A4-Q1, INA296A5-Q1 | 5 |
| Power-supply rejection ratio, input-referred | PSRR | -0.5 | 0.06 | 0.5 | µV/V | VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA296A3-Q1, INA296A4-Q1, INA296A5-Q1 | 5 |
| Input bias current | IB | 25 | 35 | 45 | µA | IB+, IB-, VSENSE=0mV | 5 |
| Reference input range | | 0 | | | V | Printed maximum is VS (supply-dependent, not numeric) | 5 |
| Common-mode input range (electrical table) | VCM | -5 | | 110 | V | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 |
| Gain error | GERR | -0.015 | 0.003 | 0.015 | % | (GND + 50mV) < VOUT < (VS - 200mV), INA296A4-Q1, INA296A5-Q1 | 6 |
| Gain error drift | | -2 | 0.1 | 2 | ppm/°C | TA = -40°C to +125°C, INA296A4-Q1, INA296A5-Q1 | 6 |
| Swing to ground | | | 8 | 20 | mV | RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C | 6 |
| Reference voltage rejection ratio, input-referred | RVRR | -1.5 | 0.5 | 1.5 | µV/V | VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA296A2-Q1, INA296A3-Q1, INA296A4-Q1, INA296A5-Q1 | 6 |
| Reference divider accuracy | | -0.01 | 0.002 | 0.01 | % | VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE = 0mV, VREF1 = VS, VREF2 = GND; VREF1 = GND, VREF2 = VS; TA = -40°C to +125°C, INA296A3-Q1, INA296A4-Q1, INA296A5-Q1 | 7 |
| Supply voltage | VS | 2.7 | | 20 | V | | 7 |
| Quiescent current | IQ | | 2.5 | 3 | mA | VSENSE = 0mV | 7 |
| Quiescent current over temperature | IQ | | | 3.2 | mA | VSENSE = 0mV, TA = -40°C to +125°C | 7 |
| Specified ambient temperature range | TA | -40 | | 125 | °C | | 7 |
| Junction-to-ambient thermal resistance RθJA | RθJA | | 167.2 | | °C/W | DGK (VSSOP), 8 pins | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | RθJC(top) | | 58.9 | | °C/W | DGK (VSSOP), 8 pins | 4 |
| Junction-to-board thermal resistance RθJB | RθJB | | 88.9 | | °C/W | DGK (VSSOP), 8 pins | 4 |
| Junction-to-top characterization parameter ΨJT | ΨJT | | 8.1 | | °C/W | DGK (VSSOP), 8 pins | 4 |
| Junction-to-board characterization parameter ΨJB | ΨJB | | 87.4 | | °C/W | DGK (VSSOP), 8 pins | 5 |
## CAD (KiCad official)
- Symbol: `INA296A4QDGKRQ1`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ina296a4qdgkrq1-etched.step` / `ina296a4qdgkrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina296a4qdgkrq1.step` / `ina296a4qdgkrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TI(德州仪器) datasheet](https://www.ti.com/lit/ds/symlink/ina296a-q1.pdf?ts=1701358290381&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Den-US%2526searchTerm%253DINA296A1QDGKRQ1%2526nr%253D3) (49 pp, sha256 `3de69b935de5298b`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina296a4qdgkrq1-datasheet.pdf)