Generated by kicad-footprint-generator · KiCad file format 20260206
INA296A3IDR
Texas Instruments · IC · SOIC-8
INA296A3IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Current-sense amplifier negative input; for high-side applications connect to load side of sense resistor, for low-side applications connect to ground side of sense resistor. |
| 2 | GND | power_in | Ground. |
| 3 | REF2 | input | Reference 2 voltage input; connect to voltage potential from 0V to VS. |
| 4 | NC | unconnected | Reserved pin; datasheet states to connect to ground. |
| 5 | OUT | output | Output voltage. |
| 6 | VS | power_in | Power supply, 2.7V to 20V. |
| 7 | REF1 | input | Reference 1 voltage input; connect to voltage potential from 0V to VS. |
| 8 | IN+ | input | Current-sense amplifier positive input; for high-side applications connect to bus-voltage side of sense resistor, for low-side applications connect to load side of sense resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -5 | 110 | V | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 | |
| Common-mode rejection ratio, input-referred | CMRR | 150 | 166 | dB | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C, INA296A | 5 | |
| Offset voltage, input-referred | Vos | -10 | 3 | 10 | µV | VSENSE = 0mV, INA296A3, INA296A4 | 5 |
| Offset voltage drift, input-referred | dVos/dT | -100 | 20 | 100 | nV/°C | TA = -40°C to 125°C, INA296A3, INA296A4, INA296A5 | 5 |
| Power-supply rejection ratio, input-referred | PSRR | -0.5 | 0.06 | 0.5 | µV/V | VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA296A3, INA296A4, INA296A5 | 5 |
| Input bias current | IB | 25 | 35 | 45 | µA | IB+, IB-, VSENSE=0mV | 5 |
| Gain error | GERR | -0.01 | 0.002 | 0.01 | % | (GND + 50mV) < VOUT < (VS - 200mV), INA296A1, INA296A2, INA296A3 | 6 |
| Gain error drift | -1 | 0.05 | 1 | ppm/°C | TA = -40°C to +125°C, INA296A1, INA296A2, INA296A3 | 6 | |
| Swing to Ground | 8 | 20 | mV | RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C | 6 | ||
| Reference voltage rejection ratio, input-referred | RVRR | -1.5 | 0.5 | 1.5 | µV/V | VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA296A2, INA296A3, INA296A4, INA296A5 | 6 |
| Reference divider accuracy | -0.01 | 0.002 | 0.01 | % | VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE =0mV, VREF1 = VS, VREF2 = GND; VREF1 = GND, VREF2 = VS; TA = -40°C to +125°C, INA296A3, INA296A4, INA296A5 | 6 | |
| Supply Voltage | VS | 2.7 | 20 | V | 7 | ||
| Quiescent current | IQ | 2.5 | 3 | mA | VSENSE = 0mV | 7 | |
| Quiescent current, over temperature | IQ | 3.2 | mA | VSENSE = 0mV, TA = -40°C to +125°C | 7 | ||
| Specified temperature range | TA | -40 | 125 | °C | 7 | ||
| Supply voltage | VS | 22 | V | 4 | |||
| Analog input differential (VIN+) − (VIN-) | -30 | 30 | V | 4 | |||
| Analog input common-mode | -20 | 120 | V | 4 | |||
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Common-mode input range | VCM | -5 | 48 | 110 | V | 4 | |
| Operating supply range | VS | 2.7 | 5 | 20 | V | 4 | |
| Ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 122.9 | °C/W | D (SOIC) 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 54.7 | °C/W | D (SOIC) 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 68.8 | °C/W | D (SOIC) 8 pins | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 12.2 | °C/W | D (SOIC) 8 pins | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 67.5 | °C/W | D (SOIC) 8 pins | 4 | ||
| Common-mode rejection ratio | CMRR | 105 | dB | f = 50kHz | 5 | ||
| Reference input range | 0 | V | 5 | ||||
| Gain | G | 50 | V/V | A3, B3 Devices | 5 | ||
| Non-Linearity Error | 0.001 | % | 6 | ||||
| Maximum Capacitive Load | 1 | nF | No sustained oscillations, No isolation resistor | 6 | |||
| Bandwidth | BW | 1.1 | MHz | All Gains, −3dB Bandwidth | 6 | ||
| Settling time to 0.5% | 1.5 | µs | VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 0.5% | 6 | |||
| Settling time to 1% | 1 | µs | VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 1% | 6 | |||
| Settling time to 5% | 0.5 | µs | VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 5% | 6 | |||
| Slew Rate Rising | SR | 8 | V/µs | 6 | |||
| Voltage noise density | 39 | nV/√Hz | A3, B3 Devices | 7 |
CAD (KiCad official)
- Symbol:
INA296A3IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina296a3idr-etched.step/ina296a3idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina296a3idr.step/ina296a3idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
a811e78481cbe850, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).