main
Ray Publish 0.1.0 56032ae

INA293B5QDBVRQ1

Texas Instruments · Current Sense Amplifiers · SOT-23-5

INA293B5QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Output voltage pin of the current-sense amplifier, bounded by the absolute maximum rating of Output GND - 0.3 V to Vs + 0.3 V.
2 GND power_in Ground reference pin for the device, which supports a single supply of 2.7 V to 20 V.
3 Vs power_in Power supply pin, with an absolute maximum supply voltage of -0.3 V to 22 V and a recommended single-supply range of 2.7 V to 20 V.
4 IN+ input Shunt resistor positive sense input, with common-mode voltage limited to -20 V to 120 V in absolute maximum ratings.
5 IN- input Shunt resistor negative sense input, with differential input (VIN+ - VIN-) limited to ±6 V for the INA293A5-Q1 and INA293B5-Q1 variants.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset voltage, input referred Vos -20 2 20 µV INA293x5-Q1 5
Offset voltage drift dVos/dT -0.25 0.025 0.25 µV/℃ TA = -40℃ to +125℃, INA293x4-Q1, INA293x5-Q1 5
Power supply rejection ratio, input referred PSRR -1 0.1 1 µV/V INA293x4-Q1, INA293x5-Q1, 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C 5
Input bias current IB+ IB+ 10 20 30 uA VSENSE = 0 V 5
Input bias current IB- IB- 10 20 30 uA VSENSE = 0 V 5
Common-mode input range VCM -4 110 V TA = -40°C to +125°C 5
Common-mode rejection ratio, input referred CMRR 140 160 dB -4 V ≤ VCM ≤ 110 V, TA = -40°C to +125°C 5
Common-mode rejection ratio, input referred at 50 kHz CMRR 85 dB f = 50 kHz 5
Gain G 500 V/V INA293x5-Q1 6
Gain error GERR -0.15 0.02 0.15 % GND + 50 mV ≤ VOUT ≤ VS, 200 mV 6
Gain error drift GERR -10 1 10 ppm/°C TA = -40°C to +125°C 6
Nonlinearity error NLERR 0.01 % 6
Maximum capacitive load CLOAD 500 pF No sustained oscillations, no isolation resistor 6
Swing to ground VOUT 0.005 0.02 V RLOAD = 10 kΩ, VSENSE = 0 V, TA = -40°C to +125°C 6
Bandwidth BW 900 kHz INA293x5-Q1, CLOAD = 5 pF, VSENSE = 8 mV 6
Slew rate SR 2.5 V/µs Rising edge 6
Settling time to 0.5% ts 10 µs VOUT = 4 V ± 0.1 V step, Output settles to 0.5% 6
Settling time to 1% ts 5 µs VOUT = 4 V ± 0.1 V step, Output settles to 1% 6
Settling time to 5% ts 1 µs VOUT = 4 V ± 0.1 V step, Output settles to 5% 6
Voltage noise density Ven 50 nV/√Hz 6
Supply voltage Vs 2.7 20 V TA = -40°C to +125°C 6
Quiescent current IQ 1.5 2 mA 6
Quiescent current over temperature IQ 2.25 mA TA = -40°C to +125°C 6
Common-mode input range (recommended) VCM -4 48 110 V 5
Operating supply range VS 2.7 5 20 V 5
Differential sense input range VSENSE 0 V Upper limit VS/G 5
Ambient temperature TA -40 125 °C 5
Supply voltage Vs -0.3 22 V 4
Differential analog input (VIN+), (VIN-) VIN+, VIN- -6 6 V INA293A5-Q1, INA293B5-Q1 4
Common-mode analog input VIN -20 120 V 4
Operating temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 184.7 °C/W DBV (SOT-23) 5 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 105.6 °C/W DBV (SOT-23) 5 pins 5
Junction-to-board thermal resistance RθJB 47.2 °C/W DBV (SOT-23) 5 pins 5
Junction-to-top characterization parameter ΨJT 21.5 °C/W DBV (SOT-23) 5 pins 5
Junction-to-board characterization parameter ΨJB 46.9 °C/W DBV (SOT-23) 5 pins 5

CAD (KiCad official)

  • Symbol: INA293B5QDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ina293b5qdbvrq1-etched.step / ina293b5qdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina293b5qdbvrq1.step / ina293b5qdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 4e476aee59aa9700, retrieved 2026-11-05, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF