3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA293B3QDBVRQ1
Texas Instruments · Current Sense Amplifiers · SOT-23-5
INA293B3QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output voltage representing the amplified differential voltage across the shunt resistor, with output swing from GND + 0.005 V to 0.02 V at minimum current and Vs - 0.07 V to Vs - 0.15 V at maximum current. |
| 2 | GND | power_in | Ground reference for the device power supply and output stage. |
| 3 | Vs | power_in | Power supply voltage input with operating range 2.7 V to 20 V and absolute maximum rating of -0.3 V to 22 V. |
| 4 | IN+ | input | Shunt resistor positive sense input for differential voltage measurement; part of differential pair with maximum ±12 V differential input and common-mode range -4 V to +110 V. |
| 5 | IN- | input | Shunt resistor negative sense input for differential voltage measurement; part of differential pair with maximum ±12 V differential input and common-mode range -4 V to +110 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode rejection ratio, input referred | CMRR | 140 | 160 | dB | -4 V ≤ VCM ≤ 110 V, TA = -40°C to +125°C | 5 | |
| Common-mode input range | VCM | -4 | 110 | V | TA = -40°C to +125°C | 5 | |
| Offset voltage, input referred (INA293x3-Q1) | Vos | -50 | 10 | 50 | µV | 5 | |
| Offset voltage drift (INA293x1/x2/x3-Q1) | dVos/dT | -0.5 | 0.05 | 0.5 | µV/℃ | TA = -40℃ to +125℃ | 5 |
| Power supply rejection ratio, input referred (INA293x3-Q1) | PSRR | -3 | 0.3 | 3 | µV/V | 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C | 5 |
| Input bias current, IB+ | IB+ | 10 | 20 | 30 | uA | VSENSE = 0 V | 5 |
| Input bias current, IB- | IB- | 10 | 20 | 30 | uA | VSENSE = 0 V | 5 |
| Gain error | GERR | -0.15 | 0.02 | 0.15 | % | GND + 50 mV ≤ VOUT ≤ VS – 200 mV | 6 |
| Gain drift | -10 | 1 | 10 | ppm/°C | TA = -40°C to +125°C | 6 | |
| Voltage output swing to ground | 0.005 | 0.02 | V | RLOAD = 10 kΩ, VSENSE = 0 V, TA = -40°C to +125°C | 6 | ||
| Supply voltage | Vs | 2.7 | 20 | V | TA = -40°C to +125°C | 6 | |
| Quiescent current | IQ | 1.5 | 2 | mA | 6 | ||
| Quiescent current over temperature | IQ | 2.25 | mA | TA = -40°C to +125°C | 6 | ||
| Common-mode input range (recommended) | VCM | -4 | 48 | 110 | V | 5 | |
| Operating supply range | VS | 2.7 | 5 | 20 | V | 5 | |
| Differential sense input range | VSENSE | 0 | V | 5 | |||
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Supply voltage | Vs | -0.3 | 22 | V | 4 | ||
| Differential input voltage (all others, not A5/B5) | (VIN+) – (VIN–) | -12 | 12 | V | 4 | ||
| Common-mode analog input voltage | VIN+, VIN– | -20 | 120 | V | 4 | ||
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 184.7 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 105.6 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 47.2 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ΨJT | 21.5 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ΨJB | 46.9 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
INA293B3QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ina293b3qdbvrq1-etched.step/ina293b3qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina293b3qdbvrq1.step/ina293b3qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
4e476aee59aa9700, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).