main
History Download
Ray Publish 0.1.0 4c8a5a8

INA293B3IDBVR

Texas Instruments · Current Sense Amplifiers · SOT-23-5

INA293B3IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Output voltage pin; the absolute maximum output range is GND - 0.3 V to Vs + 0.3 V.
2 GND power_in Ground reference pin; the zero-current output sits at a maximum of GND + 20 mV.
3 Vs power_in Power supply pin; the operating supply range is 2.7 V to 20 V, with an absolute maximum of -0.3 V to 22 V.
4 IN+ input Positive shunt resistor sense input; the common-mode range is -4 V to 110 V, with absolute maximum common-mode limits of -20 V to 120 V.
5 IN- input Negative shunt resistor sense input; the common-mode voltage at both IN+ and IN- must stay within -4 V to 110 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage Vs -0.3 22 V 4
Analog inputs differential voltage VIN+, VIN- -12 12 V Differential (VIN+), (VIN-), All others 4
Analog inputs common-mode voltage VIN+, VIN- -20 120 V Common - mode 4
Operating temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input range VCM -4 48 110 V 5
Operating supply range VS 2.7 5 20 V 5
Differential sense input range VSENSE 0 V 5
Ambient temperature TA -40 125 °C 5
Common-mode input range VCM -4 110 V TA = -40°C to +125°C 5
Common-mode rejection ratio, input referred CMRR 140 160 dB -4 V ≤ VCM ≤ 110 V, TA = -40°C to +125°C 5
Offset voltage, input referred (INA293x3) Vos -50 10 50 µV INA293x3 5
Offset voltage drift (INA293x1, x2, x3) dVos/dT -0.5 0.05 0.5 µV/℃ TA = -40℃ to +125℃, INA293x1, INA293x2, INA293x3 5
Power supply rejection ratio, input referred (INA293x2, x3) PSRR -3 0.3 3 µV/V INA293x2, INA293x3, 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C 5
Input bias current IB+ IB+ 10 20 30 uA IB+, VSENSE = 0 V 5
Input bias current IB- IB- 10 20 30 uA IB-, VSENSE = 0 V 5
Gain error GERR -0.15 0.02 0.15 % GND + 50 mV ≤ VOUT ≤ VS, 200 mV 6
Gain drift GERR -10 1 10 ppm/°C TA = -40°C to +125°C 6
Maximum capacitive load 500 pF No sustained oscillations, no isolation resistor 6
Swing to ground 0.005 0.02 V RLOAD = 10 kΩ, VSENSE = 0 V, TA = -40°C to +125°C 6
Supply voltage Vs 2.7 20 V TA = -40°C to +125°C 6
Quiescent current IQ 1.5 2 mA 6
Quiescent current over temperature IQ 2.25 mA TA = -40°C to +125°C 6
Junction-to-ambient thermal resistance RθJA 184.7 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 105.6 °C/W 5
Junction-to-board thermal resistance RθJB 47.2 °C/W 5
Junction-to-top characterization parameter ΨJT 21.5 °C/W 5
Junction-to-board characterization parameter ΨJB 46.9 °C/W 5

CAD (KiCad official)

  • Symbol: INA293B3IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina293b3idbvr-etched.step / ina293b3idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina293b3idbvr.step / ina293b3idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 48c5dc22a03325c7, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF