Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA293A2IDBVR

Texas Instruments · Current Sense Amplifiers · SOT-23-5

INA293A2IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Output voltage with linear operating range from ground + 0.005 V to supply voltage - 0.07 V, internally amplified with 50 V/V gain.
2 GND power_in Ground reference point for the device.
3 IN+ input Shunt resistor positive sense input, supporting common-mode voltages from -4 V to +110 V and differential input voltages up to 0.4 V.
4 IN- input Shunt resistor negative sense input, supporting common-mode voltages from -4 V to +110 V.
5 Vs power_in Power supply pin with recommended operating voltage range 2.7 V to 20 V, supplying internal circuits.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input range VCM -4 48 110 V 5
Operating supply range VS 2.7 5 20 V 5
Ambient temperature TA -40 125 °C 5
Differential sense input range VSENSE 0 V Maximum printed as VS / G 5
Supply voltage Vs -0.3 22 V 4
Differential input voltage (VIN+) – (VIN–) VIN+, VIN– -12 12 V All others (not INA293A5, INA293B5) 4
Common-mode input voltage VIN+, VIN– -20 120 V 4
Operating temperature TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Common-mode input range VCM -4 110 V TA = -40°C to +125°C 5
Common-mode rejection ratio, input referred CMRR 140 160 dB -4 V ≤ VCM ≤ 110 V, TA = -40°C to +125°C 5
Offset voltage, input referred (INA293x2) Vos -80 15 80 µV 5
Offset voltage drift (INA293x2) dVos/dT -0.5 0.05 0.5 µV/℃ TA = -40℃ to +125℃ 5
Power supply rejection ratio, input referred (INA293x2) PSRR -3 0.3 3 µV/V 2.7 V ≤ VS ≤ 20 V, TA = -40°C to +125°C 5
Input bias current IB+ IB+ 10 20 30 uA VSENSE = 0 V 5
Input bias current IB- IB- 10 20 30 uA VSENSE = 0 V 5
Gain error GERR -0.15 0.02 0.15 % GND + 50 mV ≤ VOUT ≤ VS – 200 mV 6
Gain drift -10 1 10 ppm/°C TA = -40°C to +125°C 6
Swing to ground 0.005 0.02 V RLOAD = 10 kΩ, VSENSE = 0 V, TA = -40°C to +125°C 6
Supply voltage Vs 2.7 20 V TA = –40°C to +125°C 6
Quiescent current IQ 1.5 2 mA 6
Quiescent current IQ 2.25 mA TA = -40°C to +125°C 6
Junction-to-ambient thermal resistance RθJA 184.7 °C/W DBV (SOT-23), 5 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 105.6 °C/W DBV (SOT-23), 5 pins 5
Junction-to-board thermal resistance RθJB 47.2 °C/W DBV (SOT-23), 5 pins 5
Junction-to-top characterization parameter ΨJT 21.5 °C/W DBV (SOT-23), 5 pins 5
Junction-to-board characterization parameter ΨJB 46.9 °C/W DBV (SOT-23), 5 pins 5

CAD (KiCad official)

  • Symbol: INA293A2IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ina293a2idbvr-etched.step / ina293a2idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina293a2idbvr.step / ina293a2idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 81084328274e85c9, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF