main
Ray
ina290a1qdckrq1: specified limits as data (metadata.characteristics, 25 rows from the datasheet)
80f7d45
INA290A1QDCKRQ1
Texas Instruments · Current Sense Amplifiers · SC-70-5
INA290A1QDCKRQ1 from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output voltage amplifier output, minimum swing to ground 0.005V, minimum swing to VS is VS-0.07V per electrical characteristics. |
| 2 | GND | power_in | Ground reference. |
| 3 | VS | power_in | Power supply input with recommended operating range of 2.7V to 20V. |
| 4 | IN+ | input | Positive differential input connected to supply side of shunt resistor for precision current sensing. |
| 5 | IN- | input | Negative differential input connected to load side of shunt resistor for precision current sensing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage, input referred (A1 devices) | Vos | -25 | 5 | 25 | µV | 5 | |
| Common-mode rejection ratio | CMRR | 140 | 160 | dB | VCM = 2.7 V to 120 V, TA = –40 °C to +125 °C | 5 | |
| Power supply rejection ratio, input referred | PSRR | -0.5 | 0.05 | 0.5 | µV/V | VS = 2.7 V to 20 V, TA = –40 °C to +125 °C | 5 |
| Input bias current IB+ | IB+ | 10 | 20 | 30 | µA | IB+, VSENSE = 0 mV | 5 |
| Input bias current IB- | IB- | 10 | 20 | 30 | µA | IB-, VSENSE = 0 mV | 5 |
| Gain error (A1) | -0.1 | 0.02 | 0.1 | % | A1, A2, A3 devices, GND + 50 mV ≤ VOUT ≤ VS – 200 mV | 5 | |
| Gain error drift | 1.5 | 5 | ppm/°C | TA = –40 °C to +125 °C | 5 | ||
| Swing to ground | VOUT | 0.005 | 0.025 | V | RLOAD = 10 kΩ, VSENSE = 0 V, TA = –40 °C to +125 °C | 5 | |
| Supply voltage | VS | 2.7 | 20 | V | TA = –40 °C to +125 °C | 5 | |
| Quiescent current, INA290 | IQ | 370 | 500 | µA | 5 | ||
| Quiescent current, INA290 over temperature | IQ | 600 | µA | TA = –40 °C to +125 °C | 5 | ||
| Common-mode input range | VCM | 48 | 120 | V | 4 | ||
| Operating supply range | VS | 2.7 | 5 | 20 | V | 4 | |
| Ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Supply voltage | Vs | -0.3 | 22 | V | 4 | ||
| Differential input voltage (VIN+) – (VIN–) | -30 | 30 | V | 4 | |||
| Common-mode analog input voltage | -20 | 122 | V | 4 | |||
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 191.6 | °C/W | DCK (SC-70) 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 144.4 | °C/W | DCK (SC-70) 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 69.2 | °C/W | DCK (SC-70) 5 pins | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 46.2 | °C/W | DCK (SC-70) 5 pins | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 69 | °C/W | DCK (SC-70) 5 pins | 4 |
CAD (KiCad official)
- Symbol:
INA290A1QDCKRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
ina290a1qdckrq1-etched.step/ina290a1qdckrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina290a1qdckrq1.step/ina290a1qdckrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
88178d62ac4f1354, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA290A1QDCKRQ1
**Texas Instruments** · Current Sense Amplifiers · SC-70-5
INA290A1QDCKRQ1 from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output voltage amplifier output, minimum swing to ground 0.005V, minimum swing to VS is VS-0.07V per electrical characteristics. |
| 2 | GND | power_in | Ground reference. |
| 3 | VS | power_in | Power supply input with recommended operating range of 2.7V to 20V. |
| 4 | IN+ | input | Positive differential input connected to supply side of shunt resistor for precision current sensing. |
| 5 | IN- | input | Negative differential input connected to load side of shunt resistor for precision current sensing. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage, input referred (A1 devices) | Vos | -25 | 5 | 25 | µV | | 5 |
| Common-mode rejection ratio | CMRR | 140 | 160 | | dB | VCM = 2.7 V to 120 V, TA = –40 °C to +125 °C | 5 |
| Power supply rejection ratio, input referred | PSRR | -0.5 | 0.05 | 0.5 | µV/V | VS = 2.7 V to 20 V, TA = –40 °C to +125 °C | 5 |
| Input bias current IB+ | IB+ | 10 | 20 | 30 | µA | IB+, VSENSE = 0 mV | 5 |
| Input bias current IB- | IB- | 10 | 20 | 30 | µA | IB-, VSENSE = 0 mV | 5 |
| Gain error (A1) | | -0.1 | 0.02 | 0.1 | % | A1, A2, A3 devices, GND + 50 mV ≤ VOUT ≤ VS – 200 mV | 5 |
| Gain error drift | | | 1.5 | 5 | ppm/°C | TA = –40 °C to +125 °C | 5 |
| Swing to ground | VOUT | | 0.005 | 0.025 | V | RLOAD = 10 kΩ, VSENSE = 0 V, TA = –40 °C to +125 °C | 5 |
| Supply voltage | VS | 2.7 | | 20 | V | TA = –40 °C to +125 °C | 5 |
| Quiescent current, INA290 | IQ | | 370 | 500 | µA | | 5 |
| Quiescent current, INA290 over temperature | IQ | | | 600 | µA | TA = –40 °C to +125 °C | 5 |
| Common-mode input range | VCM | | 48 | 120 | V | | 4 |
| Operating supply range | VS | 2.7 | 5 | 20 | V | | 4 |
| Ambient temperature | TA | -40 | | 125 | °C | | 4 |
| Supply voltage | Vs | -0.3 | | 22 | V | | 4 |
| Differential input voltage (VIN+) – (VIN–) | | -30 | | 30 | V | | 4 |
| Common-mode analog input voltage | | -20 | | 122 | V | | 4 |
| Operating temperature | TA | -55 | | 150 | °C | | 4 |
| Junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 191.6 | | °C/W | DCK (SC-70) 5 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 144.4 | | °C/W | DCK (SC-70) 5 pins | 4 |
| Junction-to-board thermal resistance | RθJB | | 69.2 | | °C/W | DCK (SC-70) 5 pins | 4 |
| Junction-to-top characterization parameter | ΨJT | | 46.2 | | °C/W | DCK (SC-70) 5 pins | 4 |
| Junction-to-board characterization parameter | ΨJB | | 69 | | °C/W | DCK (SC-70) 5 pins | 4 |
## CAD (KiCad official)
- Symbol: `INA290A1QDCKRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files: `ina290a1qdckrq1-etched.step` / `ina290a1qdckrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina290a1qdckrq1.step` / `ina290a1qdckrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina290-q1) (29 pp, sha256 `88178d62ac4f1354`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina290a1qdckrq1-datasheet.pdf)