main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ina281b1qdbvrq1: viewers rendered from the public page · Ray
ina281b1qdbvrq1-etched.glb ina281b1qdbvrq1: factory component page (tier=mfr) · Ray
ina281b1qdbvrq1-etched.step ina281b1qdbvrq1: factory component page (tier=mfr) · Ray
ina281b1qdbvrq1-hero.glb ina281b1qdbvrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
ina281b1qdbvrq1-hero.overlay.json ina281b1qdbvrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
ina281b1qdbvrq1.glb Publish 0.1.0 · Ray
ina281b1qdbvrq1.kicad_mod Publish 0.1.0 · Ray
ina281b1qdbvrq1.kicad_sym Publish 0.1.0 · Ray
ina281b1qdbvrq1.lbr Publish 0.1.0 · Ray
ina281b1qdbvrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

INA281B1QDBVRQ1

Texas Instruments · Current-Sensing Amplifiers · SOT-23-5

INA281B1QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT output Output voltage of the current-sense amplifier; the absolute maximum rating limits the output to GND - 0.3 V to VS + 0.3 V.
2 GND power_in Ground reference pin for the device.
3 Vs power_in Power supply pin; the recommended operating supply range is 2.7 V to 20 V (5 V nominal).
4 IN+ input Shunt resistor positive sense input; the operating common-mode input range is -4 V to 110 V.
5 IN- input Shunt resistor negative sense input; the operating common-mode input range is -4 V to 110 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input range VCM -4 48 110 V 4
Operating supply range VS 2.7 5 20 V 4
Differential sense input range VSENSE 0 V Upper limit printed as VS / G 4
Ambient temperature TA -40 125 °C 4
Supply voltage VS -0.3 22 V 3
Differential input voltage (VIN+, VIN-), all others except INA281A5/B5 VIN+, VIN- -12 12 V 3
Common-mode input voltage VIN+, VIN- -20 120 V 3
Output voltage VOUT -0.3 V Upper limit printed as VS + 0.3 3
Operating temperature TA -55 150 °C 3
Junction temperature TJ 150 °C 3
Storage temperature Tstg -65 150 °C 3
Common-mode input range VCM -4 110 V TA = -40 °C to +125 °C 4
Common-mode rejection ratio, input referred (DC) CMRR 120 140 dB -4 V ≤ VCM ≤ 110 V, TA = -40 °C to +125 °C 4
Offset voltage, input referred (INA281x1-Q1) Vos -500 100 500 µV INA281x1-Q1; TA = 25 °C, VS = 5 V, VCM = 48 V 4
Offset voltage drift dVos/dT -1 0.1 1 µV/℃ TA = -40 ℃ to +125 ℃ 4
Power supply rejection ratio, input referred PSRR -10 1.5 10 µV/V 2.7 V ≤ VS ≤ 20 V, TA = -40 °C to +125 °C 4
Input bias current IB+ IB+ 10 20 30 uA VSENSE = 0 V 5
Input bias current IB- IB- 10 20 30 uA VSENSE = 0 V 5
Gain error GERR -0.5 0.07 0.5 % GND + 50 mV ≤ VOUT ≤ VS, 200 mV 5
Gain drift GERR drift -20 2 20 ppm/°C TA = -40 °C to +125 °C 5
Maximum capacitive load CLOAD 500 pF No sustained oscillations, no isolation resistor 5
Swing to ground VOUT 0.005 0.02 V RLOAD = 10 kΩ, VSENSE = 0 V, TA = -40 °C to +125 °C 5
Gain G 20 V/V INA281x1-Q1 5
Nonlinearity error NLERR 0.01 % 5
Common-mode rejection ratio, input referred (AC) CMRR 65 dB f = 50 kHz 4
Bandwidth BW 1300 kHz INA281x1-Q1, CLOAD = 5 pF, VSENSE = 200 mV 5
Slew rate SR 2.5 V/µs Rising edge 5
Settling time to 0.5% ts 10 µs VOUT = 4 V ± 0.1 V step 5
Settling time to 1% ts 5 µs VOUT = 4 V ± 0.1 V step 5
Settling time to 5% ts 1 µs VOUT = 4 V ± 0.1 V step 5
Voltage noise density Ven 50 nV/√Hz 5
Supply voltage Vs 2.7 20 V TA = -40 °C to +125 °C 5
Quiescent current IQ 1.5 2 mA 5
Quiescent current IQ 2.25 mA TA = -40 °C to +125 °C 5
Internal bias resistance RB (tolerance -20%) RB -20 20 % Stated in text of Section 9.1.2, not a table 16
Internal bias resistance RB RB 6600 Ω Stated in text of Section 9.1.2, not a table 16
Junction-to-ambient thermal resistance RθJA 184.7 °C/W DBV (SOT-23), 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 105.6 °C/W DBV (SOT-23), 5 pins 4
Junction-to-board thermal resistance RθJB 47.2 °C/W DBV (SOT-23), 5 pins 4
Junction-to-top characterization parameter ΨJT 21.5 °C/W DBV (SOT-23), 5 pins 4
Junction-to-board characterization parameter ΨJB 46.9 °C/W DBV (SOT-23), 5 pins 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: INA281B1QDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina281b1qdbvrq1-etched.step / ina281b1qdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina281b1qdbvrq1.step / ina281b1qdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 64d5d08d5a8cfb41, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF