main
Ray
ina281a2qdbvrq1: specified limits as data (metadata.characteristics, 37 rows from the datasheet)
8061515
INA281A2QDBVRQ1
Texas Instruments · Current Sense Amplifiers · SOT-23-5
INA281A2QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplified output voltage, absolute maximum range GND - 0.3 V to VS + 0.3 V |
| 2 | GND | power_in | Ground reference and return path |
| 3 | IN+ | input | Positive input for shunt resistor voltage sensing, common-mode range -4 V to +110 V, differential maximum ±12 V |
| 4 | IN- | input | Negative input for shunt resistor voltage sensing, common-mode range -4 V to +110 V, differential maximum ±12 V |
| 5 | VS | power_in | Power supply input, operating range 2.7 V to 20 V, quiescent current 1.5 mA typical |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input voltage range | VCM | -4 | 110 | V | TA = -40°C to +125°C | 4 | |
| CMRR, input referred | CMRR | 120 | 140 | dB | -4V ≤ VCM ≤ 110V, TA = -40°C to +125°C | 4 | |
| Input offset voltage (INA281x2-Q1) | Vos | -300 | 55 | 300 | µV | 4 | |
| Offset voltage drift | dVos/dT | -1 | 0.1 | 1 | µV/℃ | TA = -40 ℃ to +125 ℃ | 4 |
| Power supply rejection ratio, input referred | PSRR | -10 | 1.5 | 10 | µV/V | 2.7V ≤ VS ≤ 20V, TA = –40°C to +125°C | 4 |
| Input bias current IB+ | IB+ | 10 | 20 | 30 | uA | VSENSE = 0V | 4 |
| Input bias current IB- | IB- | 10 | 20 | 30 | uA | VSENSE = 0V | 4 |
| Gain error | GERR | -0.5 | 0.07 | 0.5 | % | GND + 50mV ≤ VOUT ≤ VS – 200mV | 5 |
| Gain drift | -20 | 2 | 20 | ppm/°C | TA = -40°C to +125°C | 5 | |
| Output swing to GND | 0.005 | 0.02 | V | RLOAD = 10kΩ, VSENSE = 0V, TA = –40°C to +125°C | 5 | ||
| Maximum capacitive load | 500 | pF | No sustained oscillation, no isolation resistor | 5 | |||
| Supply voltage | VS | 2.7 | 20 | V | TA = -40°C to +125°C | 5 | |
| Quiescent current | IQ | 1.5 | 2 | mA | 5 | ||
| Quiescent current over temperature | IQ | 2.25 | mA | TA = -40°C to +125°C | 5 | ||
| Supply voltage (absolute maximum) | VS | -0.3 | 22 | V | 3 | ||
| Differential input voltage (VIN+ – VIN–) | -12 | 12 | V | All variants except INA281A5-Q1 (INA281A5-Q1 is ±6 V) | 3 | ||
| Common-mode voltage (absolute maximum) | -20 | 120 | V | 3 | |||
| Operating temperature TA (absolute maximum) | TA | -55 | 150 | °C | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Common-mode input voltage range (recommended) | VCM | -4 | 48 | 110 | V | 4 | |
| Supply voltage range (recommended) | VS | 2.7 | 5 | 20 | V | 4 | |
| Ambient temperature (recommended) | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 184.7 | °C/W | DBV (SOT-23) 5-pin | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 105.6 | °C/W | DBV (SOT-23) 5-pin | 4 | ||
| Junction-to-board thermal resistance | RθJB | 47.2 | °C/W | DBV (SOT-23) 5-pin | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 21.5 | °C/W | DBV (SOT-23) 5-pin | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 46.9 | °C/W | DBV (SOT-23) 5-pin | 4 | ||
| Gain (INA281x2-Q1) | G | 50 | V/V | 5 | |||
| Nonlinearity error | NLERR | 0.01 | % | 5 | |||
| CMRR, AC, input referred | CMRR | 65 | dB | f = 50kHz | 4 | ||
| Bandwidth (INA281x2-Q1) | BW | 1300 | kHz | INA281x2-Q1, CLOAD = 5pF, VSENSE = 80mV | 5 | ||
| Slew rate, rising edge | SR | 2.5 | V/µs | Rising edge | 5 | ||
| Settling time to 0.5% | 10 | µs | VOUT = 4V ± 0.1V step, output settles to 0.5% | 5 | |||
| Settling time to 1% | 5 | µs | VOUT = 4V ± 0.1V step, output settles to 1% | 5 | |||
| Settling time to 5% | 1 | µs | VOUT = 4V ± 0.1V step, output settles to 5% | 5 | |||
| Voltage noise density | Ven | 50 | nV/√Hz | 5 |
CAD (KiCad official)
- Symbol:
INA281A2QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ina281a2qdbvrq1-etched.step/ina281a2qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina281a2qdbvrq1.step/ina281a2qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
949a18f2e6fc9deb, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA281A2QDBVRQ1
**Texas Instruments** · Current Sense Amplifiers · SOT-23-5
INA281A2QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplified output voltage, absolute maximum range GND - 0.3 V to VS + 0.3 V |
| 2 | GND | power_in | Ground reference and return path |
| 3 | IN+ | input | Positive input for shunt resistor voltage sensing, common-mode range -4 V to +110 V, differential maximum ±12 V |
| 4 | IN- | input | Negative input for shunt resistor voltage sensing, common-mode range -4 V to +110 V, differential maximum ±12 V |
| 5 | VS | power_in | Power supply input, operating range 2.7 V to 20 V, quiescent current 1.5 mA typical |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input voltage range | VCM | -4 | | 110 | V | TA = -40°C to +125°C | 4 |
| CMRR, input referred | CMRR | 120 | 140 | | dB | -4V ≤ VCM ≤ 110V, TA = -40°C to +125°C | 4 |
| Input offset voltage (INA281x2-Q1) | Vos | -300 | 55 | 300 | µV | | 4 |
| Offset voltage drift | dVos/dT | -1 | 0.1 | 1 | µV/℃ | TA = -40 ℃ to +125 ℃ | 4 |
| Power supply rejection ratio, input referred | PSRR | -10 | 1.5 | 10 | µV/V | 2.7V ≤ VS ≤ 20V, TA = –40°C to +125°C | 4 |
| Input bias current IB+ | IB+ | 10 | 20 | 30 | uA | VSENSE = 0V | 4 |
| Input bias current IB- | IB- | 10 | 20 | 30 | uA | VSENSE = 0V | 4 |
| Gain error | GERR | -0.5 | 0.07 | 0.5 | % | GND + 50mV ≤ VOUT ≤ VS – 200mV | 5 |
| Gain drift | | -20 | 2 | 20 | ppm/°C | TA = -40°C to +125°C | 5 |
| Output swing to GND | | | 0.005 | 0.02 | V | RLOAD = 10kΩ, VSENSE = 0V, TA = –40°C to +125°C | 5 |
| Maximum capacitive load | | | | 500 | pF | No sustained oscillation, no isolation resistor | 5 |
| Supply voltage | VS | 2.7 | | 20 | V | TA = -40°C to +125°C | 5 |
| Quiescent current | IQ | | 1.5 | 2 | mA | | 5 |
| Quiescent current over temperature | IQ | | | 2.25 | mA | TA = -40°C to +125°C | 5 |
| Supply voltage (absolute maximum) | VS | -0.3 | | 22 | V | | 3 |
| Differential input voltage (VIN+ – VIN–) | | -12 | | 12 | V | All variants except INA281A5-Q1 (INA281A5-Q1 is ±6 V) | 3 |
| Common-mode voltage (absolute maximum) | | -20 | | 120 | V | | 3 |
| Operating temperature TA (absolute maximum) | TA | -55 | | 150 | °C | | 3 |
| Junction temperature | TJ | | | 150 | °C | | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| Common-mode input voltage range (recommended) | VCM | -4 | 48 | 110 | V | | 4 |
| Supply voltage range (recommended) | VS | 2.7 | 5 | 20 | V | | 4 |
| Ambient temperature (recommended) | TA | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 184.7 | | °C/W | DBV (SOT-23) 5-pin | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 105.6 | | °C/W | DBV (SOT-23) 5-pin | 4 |
| Junction-to-board thermal resistance | RθJB | | 47.2 | | °C/W | DBV (SOT-23) 5-pin | 4 |
| Junction-to-top characterization parameter | ΨJT | | 21.5 | | °C/W | DBV (SOT-23) 5-pin | 4 |
| Junction-to-board characterization parameter | ΨJB | | 46.9 | | °C/W | DBV (SOT-23) 5-pin | 4 |
| Gain (INA281x2-Q1) | G | | 50 | | V/V | | 5 |
| Nonlinearity error | NLERR | | 0.01 | | % | | 5 |
| CMRR, AC, input referred | CMRR | | 65 | | dB | f = 50kHz | 4 |
| Bandwidth (INA281x2-Q1) | BW | | 1300 | | kHz | INA281x2-Q1, CLOAD = 5pF, VSENSE = 80mV | 5 |
| Slew rate, rising edge | SR | | 2.5 | | V/µs | Rising edge | 5 |
| Settling time to 0.5% | | | 10 | | µs | VOUT = 4V ± 0.1V step, output settles to 0.5% | 5 |
| Settling time to 1% | | | 5 | | µs | VOUT = 4V ± 0.1V step, output settles to 1% | 5 |
| Settling time to 5% | | | 1 | | µs | VOUT = 4V ± 0.1V step, output settles to 5% | 5 |
| Voltage noise density | Ven | | 50 | | nV/√Hz | | 5 |
## CAD (KiCad official)
- Symbol: `INA281A2QDBVRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ina281a2qdbvrq1-etched.step` / `ina281a2qdbvrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina281a2qdbvrq1.step` / `ina281a2qdbvrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina281-q1) (25 pp, sha256 `949a18f2e6fc9deb`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina281a2qdbvrq1-datasheet.pdf)