Generated by kicad-footprint-generator · KiCad file format 20260206
INA271AQDRQ1
Texas Instruments · Current-Sensing Amplifiers · SOIC-8
INA271AQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Negative differential sense input. Connect to the load side of the current-sense shunt resistor RS. Common-mode range -16 V to +80 V, IIB typ ±8 μA (max ±16 μA). |
| 2 | GND | power_in | Device ground reference for the supply and analog signals. |
| 3 | PRE_OUT | output | Preamplifier analog output. Drives the input node of an optional external single-pole RC filter that feeds BUF IN. Internal 96-kΩ source impedance (±30% initial, -2200 ppm/°C). |
| 4 | BUF_IN | input | Output-buffer analog input. Connect to the output of the external filter driven by PRE OUT (tie directly to PRE OUT when no filter is used). Buffer gain = 2 V/V; buffer input bias current typ -50 nA. |
| 5 | OUT | output | Analog voltage output = VSENSE × 20 V/V (INA271A-Q1 gain). Rail-to-rail: swings to within ~50 mV of GND and VS with a 10-kΩ load; output impedance 1.5 Ω; drives up to 10 nF without sustained oscillation. |
| 6 | VS | power_in | Positive supply, 2.7 V to 18 V. Quiescent current 700 μA typ (900 μA max). Bypass with 0.1 μF close to the pin. |
| 7 | NC | unconnected | No internal connection. Datasheet recommends tying this pin to ground. |
| 8 | IN+ | input | Positive differential sense input. Connect to the supply side of the current-sense shunt resistor RS. Common-mode range -16 V to +80 V, independent of VS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
INA271AQDRQ1
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input voltage | VCM | -16 | 80 | V | TA = –40°C to +125°C | 4 | |
| Common-mode rejection ratio | CMRR | 80 | 120 | dB | VIN+ = –16 V to +80 V | 4 | |
| Common-mode rejection ratio | CMRR | 100 | 120 | dB | VIN+ = 12 V to 80 V, TA = –40°C to +125°C | 4 | |
| Offset voltage, RTI | VOS | -2.5 | 0.5 | 2.5 | mV | 4 | |
| Offset voltage, RTI | VOS | -3 | 3 | mV | TA = –40°C to +125°C | 4 | |
| Input offset voltage temperature coefficient | dVOS/dT | 2.5 | 20 | μV/°C | TA = –40°C to +125°C | 4 | |
| Offset voltage power-supply rejection | PSR | 5 | 100 | μV/V | VS = 2.7 V to 18 V, VCM = 18 V, TA = –40°C to +125°C | 4 | |
| Input bias current, IN– pin | IIB | -16 | 8 | 16 | μA | IN– pin, TA = –40°C to +125°C full range | 4 |
| Buffer input bias current temperature coefficient | -0.3 | 0.3 | nA/°C | 4 | |||
| Total gain error | -1 | 0.2 | 1 | % | VSENSE = 20 mV to 100 mV | 5 | |
| Total gain error | -2 | 2 | % | TA = –40°C to +125°C | 5 | ||
| Total output error | -2.2 | 0.75 | 2.2 | % | 5 | ||
| Total output error | -3 | 1 | 3 | % | TA = –40°C to +125°C | 5 | |
| Nonlinearity error | -0.002 | 0.002 | % | VSENSE = 20 mV to 100 mV | 5 | ||
| Maximum capacitive load | CLOAD | 10 | nF | No sustained oscillation | 5 | ||
| Quiescent current | IQ | 700 | 900 | μA | VOUT = 2 V | 5 | |
| Quiescent current | IQ | 350 | 950 | μA | VSENSE = 0 V, TA = –40°C to +125°C | 5 | |
| PRE OUT resistor initial variation | -30 | 30 | % | 4 | |||
| PRE OUT resistor temperature coefficient | -2200 | ppm/°C | 4 | ||||
| Buffer input bias current | -50 | nA | 4 | ||||
| Total gain error temperature coefficient | 50 | ppm/°C | TA = –40°C to +125°C | 5 | |||
| Gain (INA271A-Q1) | G | 20 | V/V | 5 | |||
| Output buffer gain | GBUF | 2 | V/V | 5 | |||
| Output impedance, OUT pin | ZO | 1.5 | Ω | 5 | |||
| Output impedance, PRE OUT pin | ZO | 96 | kΩ | 4 | |||
| Bandwidth | BW | 130 | kHz | CL = 5 pF | 5 | ||
| Phase margin | φm | 40 | degrees | CL < 10 nF | 5 | ||
| Slew rate | SR | 1 | V/μs | 5 | |||
| Settling time (1%) | ts | 2 | μs | VSENSE = 10 mV to 100 mV, CL = 5 pF | 5 | ||
| Voltage noise density | Vn | 40 | nV/√Hz | 5 | |||
| Supply voltage | VS | 2.7 | 5 | 18 | V | 4 | |
| Common-mode input voltage | VCM | -16 | 12 | 80 | V | 4 | |
| Operating free-air temperature | TA | -40 | 25 | 125 | °C | 4 | |
| Supply voltage | VS | 18 | V | 3 | |||
| Differential analog input voltage range | VSENSE | -18 | 18 | V | VSENSE = VIN+ – VIN– | 3 | |
| Common-mode analog input voltage range | VCM | -16 | 80 | V | (VIN+ + VIN–)/2 | 3 | |
| Input current (any pin) | II | 5 | mA | 3 | |||
| Maximum junction temperature | TJ | 150 | °C | 3 | |||
| Operating free-air temperature range | TA | -40 | 125 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Junction-to-ambient thermal resistance | RθJA | 78.8 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 71.6 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 68.2 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 22 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 67.6 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
INA271AQDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina271aqdrq1-etched.step/ina271aqdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina271aqdrq1.step/ina271aqdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (None pp, sha256
c5298837c411edb6, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).